TS15P07G C2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS15P07G C2G is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 1 kV peak reverse voltage and 15 A average rectified current. This component is designed for Through Hole mounting in the 4-SIP TS-6P package configuration. The TS15P07G C2G is currently discontinued at DiGi Electronics, necessitating identification of equivalent and substitute parts that maintain electrical and mechanical compatibility for ongoing production and repair applications.

Substiute Parts

TS15P07G C2G

Taiwan Semiconductor CorporationIn Stock: 1096TS15P07G C2G Datasheet

Current PartRFQ

TS15P07G

Taiwan Semiconductor CorporationIn Stock: 5391TS15P07G Datasheet

DirectRFQ

T15JA07G-K

Taiwan Semiconductor CorporationIn Stock: 2327T15JA07G-K Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS15P07G C2G bridge rectifier are identified based on strict electrical and mechanical parameter matching. The substitution criteria are:

Primary Matching Parameters:

• Diode Type: Single Phase
• Technology: Standard
• Voltage - Peak Reverse (Max): 1 kV
• Current - Average Rectified (Io): 15 A
• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P

Secondary Compliance Parameters:

• Operating Temperature Range: -55°C to 150°C (TJ)
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Parts meeting all primary parameters and compliance requirements are classified as direct substitutes. Variations in reverse leakage current within the specified operating conditions do not disqualify substitution eligibility when all other parameters remain within tolerance.

Parameter Comparison

Engineering Selection Recommendations

TS15P07G (Direct Substitute)

The TS15P07G is the primary substitute for the discontinued TS15P07G C2G. This part maintains identical electrical specifications and package configuration. The TS15P07G is currently in active product status with 5300 units in stock. Both parts are manufactured by Taiwan Semiconductor Corporation and carry ROHS3 compliance certification. The packaging format differs (Tube versus unspecified for the main part), but the electrical and mechanical interfaces remain equivalent. This part is suitable for direct replacement in all applications.

T15JA07G-K (Parametric Equivalent)

The T15JA07G-K is a parametric equivalent substitute that meets all primary electrical and mechanical requirements. This part differs from the main component in reverse leakage current specification (5 µA @ 1000 V versus 10 µA @ 1000 V), representing improved leakage performance. The T15JA07G-K is manufactured by Taiwan Semiconductor Corporation, carries ROHS3 compliance, and is in active product status with 2271 units in stock. The identical voltage, current, temperature range, and package configuration ensure mechanical and electrical compatibility. The lower reverse leakage current does not introduce incompatibility and may provide enhanced performance characteristics in applications sensitive to leakage current.

Both substitute parts satisfy compliance requirements and maintain full compatibility with the original TS15P07G C2G specification.

Frequently Asked Questions (FAQ)

Q: Can the TS15P07G be used as a direct replacement for the TS15P07G C2G?

A: Yes. The TS15P07G maintains identical electrical specifications including voltage rating (1 kV), current rating (15 A), forward voltage drop (1.1 V @ 15 A), and operating temperature range (-55°C to 150°C). Both components use the 4-SIP TS-6P Through Hole package. The TS15P07G is currently in active production status.

Q: What is the difference between the TS15P07G and T15JA07G-K?

A: Both parts meet the primary electrical specifications for 1 kV, 15 A single-phase bridge rectifiers. The T15JA07G-K specifies a reverse leakage current of 5 µA @ 1000 V, compared to 10 µA @ 1000 V for the TS15P07G. This represents improved leakage performance in the T15JA07G-K. All other parameters, including forward voltage, operating temperature, and package configuration, are identical.

Q: Are both substitute parts RoHS compliant?

A: Yes. Both the TS15P07G and T15JA07G-K carry ROHS3 compliance certification and are REACH unaffected. Both parts have Moisture Sensitivity Level 1 (Unlimited).

Q: Can I use the T15JA07G-K in place of the TS15P07G C2G?

A: Yes. The T15JA07G-K meets all primary electrical and mechanical requirements for substitution. The lower reverse leakage current (5 µA versus 10 µA) does not introduce incompatibility and represents equivalent or improved performance characteristics.

Q: What is the package configuration for these bridge rectifiers?

A: All three parts use the 4-SIP TS-6P Through Hole package configuration. This is a standard single inline package with four pins designed for Through Hole mounting on printed circuit boards.

Q: Are there any temperature or compliance restrictions for these substitutes?

A: No. Both substitute parts operate across the identical temperature range (-55°C to 150°C junction temperature) and carry the same compliance certifications as the original TS15P07G C2G. Both are ROHS3 compliant and REACH unaffected.