TS15P06G-K C2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS15P06G-K C2G is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 800 V peak reverse voltage and 15 A average rectified current. This component is classified as obsolete, necessitating identification of active equivalent and substitute parts for ongoing design support and procurement continuity. Bridge rectifiers in this voltage and current class are used in power supply circuits, industrial equipment, and AC-to-DC conversion applications requiring through-hole mounting.

Substiute Parts

TS15P06G-K C2G

Taiwan Semiconductor CorporationIn Stock: 959TS15P06G-K C2G Datasheet

Current PartRFQ

T15JA06G-K

Taiwan Semiconductor CorporationIn Stock: 2529T15JA06G-K Datasheet

Parametric EquivalentRFQ

TS15P06G

Taiwan Semiconductor CorporationIn Stock: 2071TS15P06G Datasheet

Parametric EquivalentRFQ

GBJ1508-BP

Micro Commercial CoIn Stock: 12804GBJ1508-BP Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TS15P06G-K C2G is determined by matching the following critical electrical and mechanical parameters:

Mandatory Matching Parameters:

• Voltage - Peak Reverse (Max): 800 V
• Current - Average Rectified (Io): 15 A
• Diode Type: Single Phase
• Technology: Standard
• Operating Temperature Range: -55°C to 150°C (TJ)
• Mounting Type: Through Hole
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Package Compatibility: Substitute parts must use 4-SIP through-hole packages. The TS-6P package (Taiwan Semiconductor Corporation) and GBJ package (Micro Commercial Co) are both 4-SIP through-hole configurations and are mechanically and electrically compatible for this application.

Secondary Parameters: Forward voltage (Vf) and reverse leakage current are secondary parameters that may vary within acceptable ranges for the application. Parts meeting all mandatory parameters are classified as direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

Primary Recommendation: TS15P06G

The TS15P06G is the direct parametric equivalent to the obsolete TS15P06G-K C2G. This part is manufactured by Taiwan Semiconductor Corporation, maintains identical electrical specifications, and is currently in active production status. The TS15P06G uses the same TS-6P package and meets all mandatory electrical and compliance requirements. This part is suitable for direct replacement in existing designs without modification.

Secondary Recommendation: T15JA06G-K

The T15JA06G-K is a parametric equivalent manufactured by Taiwan Semiconductor Corporation with active product status. This part meets all mandatory electrical parameters and compliance requirements. The reverse leakage current specification is lower (5 µA @ 800 V versus 10 µA @ 800 V), which represents improved performance characteristics. The T15JA06G-K uses the same TS-6P package and is suitable for direct replacement.

Alternative Recommendation: GBJ1508-BP

The GBJ1508-BP is manufactured by Micro Commercial Co and meets all mandatory electrical and compliance parameters. This part uses the GBJ package instead of TS-6P; both are 4-SIP through-hole configurations with identical pin configurations and mechanical compatibility. The GBJ1508-BP is currently in active production with high inventory availability. Forward voltage specification is provided at 7.5 A rather than 15 A; however, the 1.05 V specification at 7.5 A is consistent with standard bridge rectifier performance characteristics at this current level.

Compliance and Regulatory Status:

All substitute parts are ROHS3 compliant, REACH unaffected, and classified under ECCN EAR99 with HTSUS code 8541.10.0080, matching the regulatory profile of the main part.

Frequently Asked Questions (FAQ)

Q: Can the T15JA06G-K replace the TS15P06G-K C2G in existing designs?

A: Yes. The T15JA06G-K meets all mandatory electrical parameters: 800 V peak reverse voltage, 15 A average rectified current, single-phase standard technology, -55°C to 150°C operating temperature range, and through-hole mounting. The TS-6P package is identical. Both parts are ROHS3 compliant with MSL 1 rating.

Q: What is the difference between the TS15P06G and T15JA06G-K?

A: Both parts are parametric equivalents with identical voltage and current ratings. The primary difference is reverse leakage current: TS15P06G specifies 10 µA @ 800 V, while T15JA06G-K specifies 5 µA @ 800 V. The lower leakage current in the T15JA06G-K represents improved performance. Both use the TS-6P package and are manufactured by Taiwan Semiconductor Corporation.

Q: Can the GBJ1508-BP be used as a substitute for the TS15P06G-K C2G?

A: Yes. The GBJ1508-BP meets all mandatory electrical parameters and compliance requirements. The primary difference is the package designation: GBJ versus TS-6P. Both are 4-SIP through-hole packages with identical pin configurations and mechanical compatibility. The GBJ1508-BP is manufactured by Micro Commercial Co and is currently in active production.

Q: Are there package compatibility concerns when substituting the GBJ1508-BP?

A: No. Both the TS-6P and GBJ packages are 4-SIP through-hole configurations with identical pin spacing and mechanical dimensions. The GBJ1508-BP is a direct mechanical substitute. PCB footprints designed for TS-6P packages accommodate GBJ packages without modification.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution is determined by matching: voltage rating (800 V), current rating (15 A), diode type (single phase), technology (standard), operating temperature range (-55°C to 150°C), mounting type (through hole), and compliance certifications (ROHS3, MSL 1). Secondary parameters such as forward voltage and reverse leakage current may vary within acceptable ranges.

Q: Why is the TS15P06G-K C2G classified as obsolete?

A: The TS15P06G-K C2G is listed as obsolete by the manufacturer. Active equivalent parts (TS15P06G, T15JA06G-K, and GBJ1508-BP) are available for new designs and replacement applications.

Q: Are all substitute parts RoHS compliant?

A: Yes. All substitute parts listed (T15JA06G-K, TS15P06G, and GBJ1508-BP) are ROHS3 compliant and REACH unaffected, matching the regulatory status of the main part.