TS15P06G C2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS15P06G C2G is a single-phase bridge rectifier manufactured by Taiwan Semiconductor Corporation, rated for 800 V peak reverse voltage and 15 A average rectified current. This component is designed for through-hole mounting applications requiring standard bridge rectification in industrial and power supply circuits.

The TS15P06G C2G has been discontinued at DiGi Electronics. Identifying equivalent substitute parts is necessary to maintain design continuity and ensure uninterrupted component availability for production and repair applications.

Substiute Parts

TS15P06G C2G

Taiwan Semiconductor CorporationIn Stock: 903TS15P06G C2G Datasheet

Current PartRFQ

TS15P06G

Taiwan Semiconductor CorporationIn Stock: 2071TS15P06G Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS15P06G C2G must satisfy the following electrical and mechanical criteria:

Electrical Parameters (Critical for Substitution):

• Diode Type: Single Phase
• Technology: Standard
• Voltage - Peak Reverse (Max): 800 V
• Current - Average Rectified (Io): 15 A
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 15 A
• Current - Reverse Leakage @ Vr: 10 µA @ 800 V

Mechanical Parameters (Critical for Substitution):

• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P

Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Parts meeting all these parameters are classified as direct substitutes and can be used interchangeably in the same circuit application without design modification.

Parameter Comparison

Engineering Selection Recommendations

The TS15P06G (without C2G designation) is a direct electrical and mechanical substitute for the TS15P06G C2G. Both parts are manufactured by Taiwan Semiconductor Corporation and meet identical electrical specifications for voltage, current, and thermal characteristics.

The substitute part TS15P06G offers the following advantages:

Product Status: The substitute part maintains Active status, ensuring continued availability and supply chain reliability compared to the discontinued TS15P06G C2G.

Compliance: Both parts maintain ROHS3 compliance and identical moisture sensitivity ratings, ensuring regulatory and environmental compatibility.

Operating Temperature: The substitute part extends the maximum operating temperature to 150°C (TJ) compared to 125°C (TJ) for the main part, providing enhanced thermal margin in applications approaching upper temperature limits.

Packaging: The substitute part is supplied in Tube packaging format, which may differ from the original bulk packaging but does not affect electrical or mechanical compatibility.

For applications requiring the TS15P06G C2G, the TS15P06G substitute part provides equivalent performance with improved product availability and extended thermal operating range.

Frequently Asked Questions (FAQ)

Q: Can the TS15P06G substitute be used directly in place of the TS15P06G C2G?

A: Yes. Both parts share identical electrical specifications including voltage rating (800 V), current rating (15 A), forward voltage (1.1 V @ 15 A), and reverse leakage current (10 µA @ 800 V). Both use the same 4-SIP, TS-6P through-hole package and meet ROHS3 compliance requirements. No circuit modification is required.

Q: What is the difference between the TS15P06G C2G and TS15P06G?

A: The primary differences are product status and packaging format. The TS15P06G C2G is discontinued at DiGi Electronics and supplied in bulk packaging, while the TS15P06G is an active product supplied in tube packaging. The TS15P06G also extends the maximum operating temperature to 150°C (TJ) versus 125°C (TJ) for the C2G variant.

Q: Are there any compatibility concerns with the tube packaging format of the substitute part?

A: No. Tube packaging is a standard distribution format for through-hole components and does not affect electrical performance or mechanical fit. The component itself remains identical in form factor and pinout.

Q: Does the extended operating temperature range of the substitute part affect circuit design?

A: No. The extended temperature range of the TS15P06G (to 150°C) is a superset of the TS15P06G C2G specification (to 125°C). Applications designed for the original part will operate within the substitute part's rated temperature range.

Q: Are both parts RoHS compliant?

A: Yes. Both the TS15P06G C2G and TS15P06G are ROHS3 compliant with identical moisture sensitivity levels (MSL 1, Unlimited), ensuring regulatory compatibility in all applications.

Q: What is the base product number for these parts?

A: The base product number is TS15P06. Both the TS15P06G C2G and TS15P06G variants are derived from this base designation.