TS15P02GHD2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS15P02GHD2G is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 100 V peak reverse voltage and 15 A average rectified current. This component is designed for through-hole mounting in TS-6P package configuration and meets automotive-grade AEC-Q101 qualification standards.

The TS15P02GHD2G has been discontinued at DiGi Electronics. Equivalent and substitute parts are available from the same manufacturer with identical electrical and mechanical specifications, enabling direct replacement in existing designs without circuit modification.

Substiute Parts

TS15P02GHD2G

Taiwan Semiconductor CorporationIn Stock: 923TS15P02GHD2G Datasheet

Current PartRFQ

TS15P02GH

Taiwan Semiconductor CorporationIn Stock: 1123TS15P02GH Datasheet

DirectRFQ

TS15P02G

Taiwan Semiconductor CorporationIn Stock: 842TS15P02G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS15P02GHD2G are classified based on electrical and mechanical parameter equivalence. All substitute parts maintain identical specifications across the following critical parameters:

• Voltage - Peak Reverse (Max): 100 V
• Current - Average Rectified (Io): 15 A
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 15 A
• Current - Reverse Leakage @ Vr: 10 µA @ 100 V
• Operating Temperature Range: -55°C ~ 150°C (TJ)
• Package / Case: 4-SIP, TS-6P
• Mounting Type: Through Hole
• Grade: Automotive
• Qualification: AEC-Q101
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Substitutes are grouped into two categories: Direct Manufacturer Substitutes (active product status) and Parametric Equivalents (active product status). Both categories provide full electrical and mechanical compatibility with the discontinued TS15P02GHD2G.

Parameter Comparison

Engineering Selection Recommendations

TS15P02GH (Direct Manufacturer Substitute)

The TS15P02GH is the primary substitute for the discontinued TS15P02GHD2G. This part maintains full electrical and mechanical compatibility with identical voltage, current, temperature, and package specifications. The TS15P02GH carries active product status and meets all automotive-grade requirements including AEC-Q101 qualification. This part is suitable for direct replacement in all applications where the TS15P02GHD2G was originally specified.

TS15P02G (Parametric Equivalent)

The TS15P02G provides electrical and mechanical equivalence to the TS15P02GHD2G across all critical operating parameters. This part maintains the same voltage rating, current capacity, forward voltage characteristics, and through-hole TS-6P package configuration. The TS15P02G carries active product status. Grade and qualification specifications are not provided for this part; verification against specific automotive or qualification requirements should be performed if such compliance is mandated by the application.

Both substitute parts are manufactured by Taiwan Semiconductor Corporation and comply with ROHS3 and REACH requirements. Selection between TS15P02GH and TS15P02G should be based on specific compliance requirements and availability constraints.

Frequently Asked Questions (FAQ)

Q: Can the TS15P02GH be used as a direct replacement for the TS15P02GHD2G?

A: Yes. The TS15P02GH provides full electrical and mechanical compatibility. Both parts share identical voltage ratings (100 V peak reverse), current capacity (15 A average rectified), forward voltage characteristics (1.1 V @ 15 A), reverse leakage specifications (10 µA @ 100 V), operating temperature range (-55°C ~ 150°C), and TS-6P through-hole package configuration. Both parts meet automotive-grade AEC-Q101 qualification.

Q: What is the difference between the TS15P02GH and TS15P02G?

A: Both parts provide identical electrical performance and package compatibility. The TS15P02GH explicitly specifies automotive grade and AEC-Q101 qualification. The TS15P02G does not provide grade or qualification specifications in the available data. If automotive qualification is required for the application, the TS15P02GH is the appropriate selection.

Q: Are all substitute parts in the same physical package?

A: Yes. The TS15P02GHD2G, TS15P02GH, and TS15P02G all use the 4-SIP, TS-6P through-hole package configuration. No PCB layout modifications are required for substitution.

Q: Do the substitute parts meet RoHS and REACH compliance?

A: Yes. Both TS15P02GH and TS15P02G are ROHS3 compliant and REACH unaffected, matching the compliance status of the TS15P02GHD2G.

Q: What is the moisture sensitivity level for these parts?

A: All three parts carry MSL 1 (Unlimited) classification, indicating no moisture sensitivity restrictions during storage or handling.

Q: Are there inventory considerations when selecting a substitute?

A: The TS15P02GH has 1048 pieces in stock, and the TS15P02G has 814 pieces in stock. Both parts maintain active product status and are available for immediate procurement.