TS15P02GHC2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS15P02GHC2G is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 100 V peak reverse voltage and 15 A average rectified current. This component is designed for through-hole mounting in the TS-6P package and meets automotive-grade specifications with AEC-Q101 qualification.

The TS15P02GHC2G has been discontinued at DiGi Electronics. Equivalent and substitute parts are available from Taiwan Semiconductor Corporation that maintain identical electrical and mechanical specifications, enabling direct replacement in existing designs and new applications.

Substiute Parts

TS15P02GHC2G

Taiwan Semiconductor CorporationIn Stock: 1076TS15P02GHC2G Datasheet

Current PartRFQ

TS15P02GH

Taiwan Semiconductor CorporationIn Stock: 1123TS15P02GH Datasheet

DirectRFQ

TS15P02G

Taiwan Semiconductor CorporationIn Stock: 842TS15P02G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS15P02GHC2G are classified based on electrical and mechanical parameter equivalence. All substitute parts maintain identical specifications across the following critical parameters:

• Voltage - Peak Reverse (Max): 100 V
• Current - Average Rectified (Io): 15 A
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 15 A
• Current - Reverse Leakage @ Vr: 10 µA @ 100 V
• Operating Temperature Range: -55°C ~ 150°C (TJ)
• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P
• Grade: Automotive
• Qualification: AEC-Q101
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Substitute parts are grouped into two categories: Direct Manufacturer Substitutes and Parametric Equivalents. Both categories satisfy all electrical and mechanical requirements for direct replacement.

Parameter Comparison

Engineering Selection Recommendations

TS15P02GH (Direct Manufacturer Substitute)

The TS15P02GH is the primary substitute for the discontinued TS15P02GHC2G. This part is manufactured by Taiwan Semiconductor Corporation and maintains active product status. All electrical parameters, mechanical specifications, automotive-grade classification, and AEC-Q101 qualification are identical to the main part. The TS15P02GH is suitable for direct replacement in all applications where the TS15P02GHC2G was specified. Inventory availability is 1048 pieces.

TS15P02G (Parametric Equivalent)

The TS15P02G provides parametric equivalence across all critical electrical and mechanical specifications. This part is manufactured by Taiwan Semiconductor Corporation and maintains active product status. All voltage, current, temperature, and package specifications match the main part. Grade and qualification information are not specified for this variant. The TS15P02G is suitable for applications where parametric compatibility is the primary selection criterion. Inventory availability is 814 pieces.

Frequently Asked Questions (FAQ)

Q: Can the TS15P02GH be used as a direct replacement for the TS15P02GHC2G?

A: Yes. The TS15P02GH maintains identical electrical specifications (100 V peak reverse voltage, 15 A average rectified current, 1.1 V forward voltage at 15 A), identical operating temperature range (-55°C ~ 150°C), identical automotive-grade classification, identical AEC-Q101 qualification, and identical TS-6P through-hole package. Direct replacement is supported.

Q: What is the difference between the TS15P02GH and TS15P02G?

A: Both parts maintain identical electrical and mechanical specifications. The TS15P02GH explicitly specifies automotive-grade classification and AEC-Q101 qualification, while the TS15P02G does not include these specifications in the provided data. For automotive applications requiring AEC-Q101 compliance, the TS15P02GH is the appropriate selection.

Q: Are all substitute parts in the TS-6P package?

A: Yes. The TS15P02GHC2G, TS15P02GH, and TS15P02G are all packaged in the 4-SIP, TS-6P through-hole package. Pin configuration and board layout compatibility are maintained across all parts.

Q: Do the substitute parts meet RoHS and REACH requirements?

A: Yes. Both substitute parts are ROHS3 compliant and REACH unaffected, matching the compliance status of the main part.

Q: What is the moisture sensitivity level for these parts?

A: All parts, including the main part and substitutes, have a Moisture Sensitivity Level (MSL) of 1 (Unlimited), indicating no moisture sensitivity restrictions during storage and handling.

Q: Are these parts suitable for automotive applications?

A: The TS15P02GH is explicitly classified as automotive-grade with AEC-Q101 qualification. The TS15P02G maintains identical electrical and mechanical specifications but does not include explicit automotive-grade or AEC-Q101 designation in the provided data. For automotive applications, the TS15P02GH is the recommended selection.