TS15P02G C2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS15P02G C2G is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 100 V peak reverse voltage and 15 A average rectified current. This component is designed for through-hole mounting applications requiring standard bridge rectification in industrial and commercial power supply circuits.

The TS15P02G C2G has been discontinued at DiGi Electronics. Equivalent and parametrically compatible substitute parts are available from the same manufacturer to maintain design continuity and ensure uninterrupted supply chain access for applications requiring this rectifier specification.

Substiute Parts

TS15P02G C2G

Taiwan Semiconductor CorporationIn Stock: 1101TS15P02G C2G Datasheet

Current PartRFQ

TS15P02G

Taiwan Semiconductor CorporationIn Stock: 842TS15P02G Datasheet

DirectRFQ

TS15P02GH

Taiwan Semiconductor CorporationIn Stock: 1123TS15P02GH Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS15P02G C2G are identified based on strict electrical and mechanical parameter matching within the bridge rectifier diode category. Substitution eligibility is determined by the following criteria:

Electrical Parameters (Must Match):

• Voltage - Peak Reverse (Max): 100 V
• Current - Average Rectified (Io): 15 A
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 15 A
• Current - Reverse Leakage @ Vr: 10 µA @ 100 V
• Operating Temperature Range: -55°C to 150°C (TJ)

Mechanical Parameters (Must Match):

• Diode Type: Single Phase
• Technology: Standard
• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P

Compliance Parameters (Must Match):

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Substitute parts identified below meet all electrical, mechanical, and compliance requirements and are sourced from Taiwan Semiconductor Corporation, the original manufacturer.

Parameter Comparison

Engineering Selection Recommendations

TS15P02G (Direct Equivalent): This part is the direct equivalent to the TS15P02G C2G and is currently in active production status. All electrical, mechanical, and compliance parameters are identical. This part is the primary substitute for applications previously using the discontinued TS15P02G C2G. Current inventory availability is 814 pieces.

TS15P02GH (Parametric Equivalent with Automotive Grade): This part meets all electrical, mechanical, and compliance requirements of the TS15P02G C2G. The TS15P02GH carries automotive-grade qualification (AEC-Q101) and is suitable for applications requiring enhanced reliability standards. This part is currently in active production status with 1048 pieces available. Selection of this part is appropriate for applications in automotive or mission-critical environments where automotive-grade components are specified or preferred.

Both substitute parts are ROHS3 compliant and maintain the same through-hole TS-6P package configuration, ensuring direct mechanical and electrical compatibility with existing PCB designs.

Frequently Asked Questions (FAQ)

Q: Can the TS15P02G be used as a direct replacement for the discontinued TS15P02G C2G?

A: Yes. The TS15P02G is a direct equivalent with identical electrical specifications (100 V peak reverse voltage, 15 A average rectified current, 1.1 V forward voltage drop, 10 µA reverse leakage) and mechanical configuration (4-SIP, TS-6P through-hole package). Both parts are ROHS3 compliant with MSL 1 rating.

Q: What is the difference between TS15P02G and TS15P02GH?

A: Both parts have identical electrical and mechanical specifications. The TS15P02GH carries automotive-grade qualification (AEC-Q101) and is designated for automotive applications. Selection between these parts depends on application requirements and industry standards compliance.

Q: Are all substitute parts compatible with the original PCB design?

A: Yes. All substitute parts use the identical 4-SIP, TS-6P through-hole package configuration. No PCB layout modifications are required for substitution.

Q: Do the substitute parts meet the same compliance standards as the original part?

A: Yes. All substitute parts are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity level, matching the original TS15P02G C2G specifications.

Q: What is the operating temperature range for these bridge rectifiers?

A: All parts in this substitution group operate across -55°C to 150°C junction temperature range, suitable for industrial and commercial applications.

Q: Can TS15P02GH be used in non-automotive applications?

A: Yes. The TS15P02GH meets all electrical and mechanical requirements for standard bridge rectifier applications. The automotive-grade qualification is an additional certification that does not restrict use in non-automotive designs.