TS15P01GHD2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS15P01GHD2G is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 50 V peak reverse voltage and 15 A average rectified current. This component is designed for through-hole mounting in the TS-6P package and meets automotive-grade specifications with AEC-Q101 qualification.

The TS15P01GHD2G has been discontinued at DiGi Electronics. Equivalent and substitute parts are available from the same manufacturer with identical electrical and mechanical specifications, providing direct replacement options for new designs and legacy system maintenance.

Substiute Parts

TS15P01GHD2G

Taiwan Semiconductor CorporationIn Stock: 1016TS15P01GHD2G Datasheet

Current PartRFQ

TS15P01GH

Taiwan Semiconductor CorporationIn Stock: 912TS15P01GH Datasheet

DirectRFQ

TS15P01G

Taiwan Semiconductor CorporationIn Stock: 976TS15P01G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS15P01GHD2G are determined by equivalence across all critical electrical and mechanical parameters. The substitution logic is based on the following key parameters:

Electrical Specifications:

• Voltage - Peak Reverse (Max): 50 V
• Current - Average Rectified (Io): 15 A
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 15 A
• Current - Reverse Leakage @ Vr: 10 µA @ 50 V
• Operating Temperature Range: -55°C to 150°C (TJ)

Mechanical & Compliance Specifications:

• Diode Type: Single Phase
• Technology: Standard
• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P
• Grade: Automotive
• Qualification: AEC-Q101
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Parts meeting all these parameters are classified as direct substitutes. The TS15P01GH and TS15P01G both satisfy these criteria and are manufactured by Taiwan Semiconductor Corporation.

Parameter Comparison

Engineering Selection Recommendations

TS15P01GH (Direct Substitute): The TS15P01GH is the primary substitute for the discontinued TS15P01GHD2G. This part maintains identical electrical specifications, automotive-grade classification, AEC-Q101 qualification, and TS-6P package configuration. The TS15P01GH is currently in active production status with 900 units in stock, providing immediate availability for replacement applications.

TS15P01G (Parametric Equivalent): The TS15P01G provides parametric equivalence across all electrical and mechanical specifications. This part shares the same voltage rating, current rating, forward voltage drop, reverse leakage characteristics, operating temperature range, mounting type, and package configuration. The TS15P01G is in active production status with 965 units in stock. Grade and qualification information is not specified for this variant; verification of automotive and AEC-Q101 requirements is necessary for applications requiring these certifications.

For applications requiring confirmed automotive-grade specifications and AEC-Q101 qualification, the TS15P01GH is the recommended selection. For applications where automotive grading is not a requirement, the TS15P01G provides equivalent electrical and mechanical performance.

Frequently Asked Questions (FAQ)

Q: Can the TS15P01GH be used as a direct replacement for the TS15P01GHD2G?

A: Yes. The TS15P01GH meets all electrical and mechanical specifications of the TS15P01GHD2G, including voltage rating (50 V), current rating (15 A), forward voltage drop (1.1 V @ 15 A), reverse leakage (10 µA @ 50 V), operating temperature range (-55°C to 150°C), automotive grade, AEC-Q101 qualification, and TS-6P package configuration.

Q: What is the difference between the TS15P01GH and TS15P01G?

A: Both parts share identical electrical specifications and package configuration. The TS15P01GH carries automotive-grade classification and AEC-Q101 qualification. The TS15P01G provides parametric equivalence but does not specify automotive grade or AEC-Q101 qualification status.

Q: Are all substitute parts compatible with the TS-6P package footprint?

A: Yes. All listed substitute parts use the 4-SIP, TS-6P package configuration, ensuring mechanical and electrical compatibility with existing through-hole PCB designs.

Q: Do the substitute parts meet RoHS compliance requirements?

A: Yes. Both TS15P01GH and TS15P01G are ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited), matching the compliance profile of the TS15P01GHD2G.

Q: What is the operating temperature range for these bridge rectifiers?

A: All parts operate across the temperature range of -55°C to 150°C (TJ), providing consistent thermal performance across the specified range.

Q: Can these parts be used in automotive applications?

A: The TS15P01GH is qualified for automotive applications with AEC-Q101 certification. The TS15P01G provides equivalent electrical and mechanical performance but does not specify automotive qualification; application requirements should determine part selection.