TS10P07GHC2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS10P07GHC2G is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation. This component is classified as a standard bridge rectifier rated for 1 kV peak reverse voltage and 10 A average rectified current. The part is actively produced and available in through-hole mounting configuration with TS-6P package designation. Bridge rectifiers are essential components in AC-to-DC power conversion applications, serving as the primary rectification stage in power supplies and industrial equipment. Substitute parts are identified based on electrical parameter equivalence and mechanical compatibility within the through-hole mounting category.

Substiute Parts

TS10P07GHC2G

Taiwan Semiconductor CorporationIn Stock: 1142TS10P07GHC2G Datasheet

Current PartRFQ

T10JA07G-K

Taiwan Semiconductor CorporationIn Stock: 2597T10JA07G-K Datasheet

Parametric EquivalentRFQ

TS10P07G

Taiwan Semiconductor CorporationIn Stock: 1997TS10P07G Datasheet

Parametric EquivalentRFQ

TS10P07GH

Taiwan Semiconductor CorporationIn Stock: 1992TS10P07GH Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS10P07GHC2G are identified based on strict electrical and mechanical parameter equivalence. The substitution criteria are defined by the following key parameters:

Electrical Parameters (Must Match):

• Voltage - Peak Reverse (Max): 1 kV
• Current - Average Rectified (Io): 10 A
• Diode Type: Single Phase
• Technology: Standard
• Operating Temperature Range: -55°C to 150°C (TJ)

Mechanical Parameters (Must Match):

• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P
• Supplier Device Package: TS-6P

Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

All identified substitute parts maintain identical electrical ratings and mechanical compatibility. Variations in reverse leakage current and packaging format (tube versus other configurations) do not affect functional substitution within the specified electrical and thermal operating envelope.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts maintain full electrical and mechanical compatibility with the TS10P07GHC2G. Selection among equivalent parts is determined by application-specific requirements and compliance mandates.

TS10P07GH: This part is the direct equivalent to TS10P07GHC2G, sharing identical electrical specifications, automotive grade designation, and AEC-Q101 qualification. This part is suitable for applications requiring automotive-grade components and formal qualification compliance.

TS10P07G: This part provides electrical equivalence with identical voltage, current, and temperature ratings. It lacks automotive grade designation and AEC-Q101 qualification. This part is suitable for general industrial applications where automotive qualification is not required.

T10JA07G-K: This part meets all electrical and mechanical substitution criteria. It features lower reverse leakage current (5 µA @ 1000 V compared to 10 µA @ 1000 V), which represents improved leakage performance. This part lacks automotive grade designation and AEC-Q101 qualification. This part is suitable for applications where enhanced reverse leakage characteristics are beneficial and automotive qualification is not mandated.

All substitute parts are ROHS3 compliant, carry MSL rating of 1 (Unlimited), and are actively produced by Taiwan Semiconductor Corporation.

Frequently Asked Questions (FAQ)

Q: Can TS10P07G be used as a direct replacement for TS10P07GHC2G?

A: TS10P07G provides full electrical and mechanical compatibility. Both parts share identical voltage ratings (1 kV), current ratings (10 A), forward voltage characteristics (1.1 V @ 10 A), operating temperature range (-55°C to 150°C), and TS-6P package configuration. The primary difference is the absence of automotive grade designation and AEC-Q101 qualification on TS10P07G. Selection depends on whether automotive qualification is required for the application.

Q: What is the difference between TS10P07GH and TS10P07GHC2G?

A: TS10P07GH and TS10P07GHC2G are electrically and mechanically equivalent. Both carry automotive grade designation and AEC-Q101 qualification. Both are rated for 1 kV, 10 A, with identical forward voltage and operating temperature specifications. Both use the TS-6P through-hole package. These parts are interchangeable for applications requiring automotive-grade components.

Q: Why does T10JA07G-K show lower reverse leakage current?

A: T10JA07G-K exhibits reverse leakage current of 5 µA @ 1000 V, compared to 10 µA @ 1000 V for the main part and other substitutes. This represents improved leakage performance within the same voltage and current rating class. All other electrical parameters remain identical. The lower leakage characteristic does not affect functional substitution.

Q: Are all substitute parts available in the same packaging format?

A: All substitute parts use the 4-SIP, TS-6P through-hole package configuration. Packaging format differences (tube versus other configurations) do not affect electrical or mechanical compatibility. The TS-6P supplier device package designation is consistent across all parts.

Q: Which substitute part should be selected for automotive applications?

A: For automotive applications requiring formal qualification compliance, select either TS10P07GH or TS10P07GHC2G. Both parts carry automotive grade designation and AEC-Q101 qualification. TS10P07G and T10JA07G-K lack automotive qualification and are not suitable for applications with automotive qualification mandates.

Q: Are all substitute parts RoHS compliant?

A: All substitute parts are ROHS3 compliant. All parts carry MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions during storage and handling.