TS10P05GHD2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS10P05GHD2G is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation. This component is classified as a standard bridge rectifier rated for 600 V peak reverse voltage and 10 A average rectified current, housed in a through-hole TS-6P package. The part is currently active in production status with automotive-grade qualification (AEC-Q101) and ROHS3 compliance. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the product line, enabling component interchangeability in applications where the original part number becomes unavailable or inventory constraints require alternative sourcing.

Substiute Parts

TS10P05GHD2G

Taiwan Semiconductor CorporationIn Stock: 1175TS10P05GHD2G Datasheet

Current PartRFQ

T10JA05G-K

Taiwan Semiconductor CorporationIn Stock: 2335T10JA05G-K Datasheet

Parametric EquivalentRFQ

TS10P05G

Taiwan Semiconductor CorporationIn Stock: 1924TS10P05G Datasheet

Parametric EquivalentRFQ

TS10P05GH

Taiwan Semiconductor CorporationIn Stock: 2289TS10P05GH Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS10P05GHD2G are identified based on strict equivalence of critical electrical and mechanical parameters. The substitution logic is based on the following criteria:

Primary Equivalence Parameters:

• Voltage - Peak Reverse (Max): 600 V
• Current - Average Rectified (Io): 10 A
• Diode Type: Single Phase
• Technology: Standard
• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P
• Operating Temperature Range: -55°C to 150°C

Secondary Compatibility Parameters:

• Voltage - Forward (Vf) (Max): 1.1 V (at rated current)
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Parts are grouped as substitutes when all primary equivalence parameters match exactly. Variations in secondary parameters such as reverse leakage current (within the specified range) or forward voltage measurement conditions do not disqualify substitution eligibility, as these represent acceptable manufacturing tolerances within the same product family.

Parameter Comparison

Engineering Selection Recommendations

TS10P05GH is a direct substitute for TS10P05GHD2G. Both parts maintain identical electrical specifications, automotive-grade classification, and AEC-Q101 qualification. The primary distinction is packaging format (tube versus unspecified in the main part). Both parts are active in production status with full ROHS3 compliance and unlimited moisture sensitivity rating.

TS10P05G is a parametric equivalent with the following consideration: the forward voltage specification is measured at 15 A rather than 10 A. All other electrical parameters, operating temperature range, mounting type, and package configuration remain equivalent. This part does not carry automotive-grade designation or AEC-Q101 qualification. Selection of this part is appropriate for non-automotive applications where automotive qualification is not required.

T10JA05G-K is a parametric equivalent with reverse leakage current specified at 5 µA @ 600 V, compared to 10 µA @ 600 V for the main part. This represents improved leakage performance. The part does not carry automotive-grade designation or AEC-Q101 qualification. All other electrical parameters, operating temperature range, mounting type, and package configuration remain equivalent.

Selection among substitute parts should be based on application requirements regarding automotive qualification status and specific leakage current performance criteria.

Frequently Asked Questions (FAQ)

Q: Can TS10P05GH be used as a direct replacement for TS10P05GHD2G?

A: Yes. TS10P05GH maintains identical electrical specifications (600 V peak reverse voltage, 10 A average rectified current, 1.1 V forward voltage @ 10 A), identical operating temperature range (-55°C to 150°C), identical package configuration (4-SIP, TS-6P through-hole), and identical automotive-grade qualification with AEC-Q101 certification. The parts are functionally interchangeable.

Q: What is the difference between TS10P05G and TS10P05GH?

A: The primary difference is that TS10P05G does not carry automotive-grade designation or AEC-Q101 qualification. Additionally, the forward voltage specification for TS10P05G is measured at 15 A rather than 10 A. All other electrical parameters and package specifications are equivalent. TS10P05G is suitable for general-purpose applications where automotive qualification is not required.

Q: Is T10JA05G-K compatible with TS10P05GHD2G?

A: T10JA05G-K is electrically compatible based on voltage and current ratings. However, it does not carry automotive-grade designation or AEC-Q101 qualification. The reverse leakage current is specified at 5 µA @ 600 V, which is lower than the 10 µA @ 600 V specification of TS10P05GHD2G. This part is suitable for applications where automotive qualification is not required and where improved leakage performance is beneficial.

Q: Are all substitute parts available in the same package configuration?

A: Yes. All substitute parts (TS10P05GH, TS10P05G, and T10JA05G-K) are configured in the 4-SIP, TS-6P through-hole package. Physical mounting and PCB layout compatibility is maintained across all parts.

Q: What compliance standards apply to these bridge rectifier parts?

A: All parts are ROHS3 compliant and carry unlimited moisture sensitivity level (MSL 1). TS10P05GHD2G and TS10P05GH additionally carry AEC-Q101 automotive qualification. All parts are REACH unaffected and classified under ECCN EAR99 and HTSUS 8541.10.0080.

Q: Can these parts be used interchangeably in automotive applications?

A: TS10P05GHD2G and TS10P05GH are both automotive-grade with AEC-Q101 qualification and are interchangeable in automotive applications. TS10P05G and T10JA05G-K do not carry automotive qualification and should not be used in applications requiring automotive-grade components.