TS10P05G C2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS10P05G C2G is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 600 V peak reverse voltage and 10 A average rectified current. This component is packaged in a 4-SIP, TS-6P through-hole configuration and is compliant with ROHS3 and REACH standards. The TS10P05G C2G has been discontinued at DiGi Electronics, necessitating identification of equivalent and substitute parts that maintain electrical and mechanical compatibility for ongoing production and repair applications.

Substiute Parts

TS10P05G C2G

Taiwan Semiconductor CorporationIn Stock: 908TS10P05G C2G Datasheet

Current PartRFQ

TS10P05G

Taiwan Semiconductor CorporationIn Stock: 1924TS10P05G Datasheet

DirectRFQ

T10JA05G-K

Taiwan Semiconductor CorporationIn Stock: 2335T10JA05G-K Datasheet

Parametric EquivalentRFQ

TS10P05GH

Taiwan Semiconductor CorporationIn Stock: 2289TS10P05GH Datasheet

Parametric EquivalentRFQ

TS10P05GHC2G

Taiwan Semiconductor CorporationIn Stock: 970TS10P05GHC2G Datasheet

Parametric EquivalentRFQ

TS10P05GHD2G

Taiwan Semiconductor CorporationIn Stock: 1175TS10P05GHD2G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TS10P05G C2G is determined by strict equivalence across the following critical parameters:

Electrical Parameters (Must Match):

• Voltage - Peak Reverse (Max): 600 V
• Current - Average Rectified (Io): 10 A
• Diode Type: Single Phase
• Technology: Standard
• Operating Temperature Range: -55°C ~ 150°C (TJ)

Mechanical Parameters (Must Match):

• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P

Compliance Parameters (Must Match):

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Substitute parts are grouped into two categories: direct equivalents with identical electrical specifications and parametric equivalents that meet all critical electrical and mechanical requirements while maintaining functional interchangeability. Forward voltage characteristics and reverse leakage current variations within the specified ranges do not preclude substitution when all primary parameters align.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent (Standard Grade): The TS10P05G is the primary direct equivalent to the TS10P05G C2G. Both parts share identical electrical specifications, the same 4-SIP, TS-6P package, and equivalent compliance certifications. The TS10P05G is currently in active production status with 1900 units in stock, providing immediate availability for replacement applications.

Parametric Equivalent (Standard Grade): The T10JA05G-K meets all critical electrical and mechanical parameters required for substitution. This part maintains the 600 V / 10 A rating, through-hole TS-6P package configuration, and ROHS3 compliance. The T10JA05G-K exhibits lower reverse leakage current (5 µA @ 600 V compared to 10 µA @ 600 V), which represents improved performance characteristics. This part is actively produced with 2237 units in stock.

Automotive-Grade Equivalents: The TS10P05GH, TS10P05GHC2G, and TS10P05GHD2G are automotive-qualified variants carrying AEC-Q101 certification. These parts maintain identical electrical specifications and package configuration to the main part while meeting automotive industry qualification standards. These options are suitable for applications requiring automotive-grade components and are all in active production status.

Selection between standard-grade and automotive-grade substitutes depends on application requirements and end-use specifications. All listed substitutes provide functional interchangeability based on provided electrical and mechanical parameters.

Frequently Asked Questions (FAQ)

Q: Can TS10P05G be used as a direct replacement for TS10P05G C2G?

A: Yes. The TS10P05G is a direct equivalent with identical electrical specifications (600 V, 10 A), the same 4-SIP, TS-6P package, and equivalent compliance certifications. The primary difference is product status: TS10P05G is currently active in production while TS10P05G C2G is discontinued.

Q: What is the difference between standard-grade and automotive-grade substitutes?

A: Standard-grade parts (TS10P05G, T10JA05G-K) are suitable for general industrial applications. Automotive-grade parts (TS10P05GH, TS10P05GHC2G, TS10P05GHD2G) carry AEC-Q101 qualification and are designed for automotive applications. All maintain identical electrical ratings and package specifications.

Q: Are all substitute parts compatible with the same PCB footprint?

A: Yes. All substitute parts use the 4-SIP, TS-6P through-hole package configuration, ensuring mechanical and electrical compatibility with existing PCB designs for the TS10P05G C2G.

Q: Does the reverse leakage current difference in T10JA05G-K affect substitution?

A: No. The T10JA05G-K exhibits 5 µA reverse leakage at 600 V compared to 10 µA in the main part. This represents improved performance and does not preclude substitution. The part meets all critical electrical parameters required for functional interchangeability.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, matching the compliance profile of the TS10P05G C2G.

Q: Which substitute part offers the best availability?

A: The T10JA05G-K currently has the highest inventory level at 2237 units in stock. The TS10P05G has 1900 units available. Both provide immediate availability for production requirements.

Q: Can automotive-grade parts be used in non-automotive applications?

A: Yes. Automotive-grade parts (TS10P05GH, TS10P05GHC2G, TS10P05GHD2G) meet all electrical and mechanical requirements for standard industrial applications. AEC-Q101 qualification represents additional quality assurance and does not restrict use in non-automotive circuits.