TS01AME Slide Switch SPDT Equivalent & Substitute Parts

Part Overview

The TS01AME is a slide switch manufactured by C&K with SPDT (Single Pole Double Throw) configuration rated for 3A at 120V AC and 28V DC. This component features through-hole, right-angle mounting with PC pin termination and epoxy sealed terminals. The part is currently obsolete, making equivalent and substitute parts necessary for ongoing design support and production continuity.

Substiute Parts

TS01AME

C&KIn Stock: 848TS01AME Datasheet

Current PartRFQ

TS01ASE

C&KIn Stock: 813TS01ASE Datasheet

DirectRFQ

1571984-1

TE Connectivity ALCOSWITCH SwitchesIn Stock: 43461571984-1 Datasheet

SimilarRFQ

48BFSP1M6QT

Grayhill Inc.In Stock: 114448BFSP1M6QT Datasheet

SimilarRFQ

48BFSP1M6RT

Grayhill Inc.In Stock: 78548BFSP1M6RT Datasheet

SimilarRFQ

500ASSP1M6QE

E-SwitchIn Stock: 5835500ASSP1M6QE Datasheet

SimilarRFQ

500ASSP1M6RE

E-SwitchIn Stock: 7618500ASSP1M6RE Datasheet

SimilarRFQ

500RSP1S1M6RE

E-SwitchIn Stock: 1172500RSP1S1M6RE Datasheet

SimilarRFQ

AS12AH

NKK SwitchesIn Stock: 4823AS12AH Datasheet

SimilarRFQ

AS12CH

NKK SwitchesIn Stock: 966AS12CH Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS01AME are grouped based on electrical and mechanical compatibility within the following criteria:

Primary Substitutes (Full Electrical Equivalence): Parts matching all critical parameters: SPDT circuit, 3A current rating, 120V AC / 28V DC voltage ratings, through-hole right-angle mounting, PC pin termination, and -30°C to 85°C operating temperature range.

Secondary Substitutes (Reduced Electrical Rating): Parts with identical mechanical form factor and mounting but reduced current or voltage ratings (0.4VA at 20V AC/DC). These are suitable only where circuit requirements permit lower electrical specifications.

Tertiary Substitutes (Modified Mechanical Specifications): Parts with different actuator lengths, switch travel distances, or contact materials but maintaining SPDT configuration and through-hole mounting. These require mechanical validation for PCB layout compatibility.

Parameter Comparison

Engineering Selection Recommendations

Direct Replacement (Recommended): TS01ASE is the primary substitute for TS01AME. Both parts are manufactured by C&K, share identical electrical ratings (3A at 120V AC / 28V DC), and maintain the same mechanical form factor. TS01ASE is currently in active production status with ROHS3 compliance and equivalent 60,000-cycle electrical life rating.

Electrical Equivalent Alternatives: 48BFSP1M6QT (Grayhill Inc.) and 500ASSP1M6QE (E-Switch) provide full electrical equivalence with 3A current rating and 120V AC / 28V DC voltage specifications. Both maintain through-hole right-angle mounting and PC pin termination. Note that electrical life ratings are reduced to 30,000 cycles compared to the original 60,000-cycle specification.

Reduced Rating Substitutes: Parts rated for 0.4VA at 20V AC/DC (1571984-1, 48BFSP1M6RT, 500ASSP1M6RE, 500RSP1S1M6RE) or 0.4VA at 28V AC/DC (AS12AH, AS12CH) are suitable only for applications where circuit requirements permit significantly lower electrical specifications. These parts maintain SPDT configuration and through-hole mounting but are not electrically equivalent to the TS01AME.

All substitute parts listed are ROHS3 compliant and maintain MSL rating of 1 (Unlimited). Selection should be based on circuit electrical requirements and mechanical PCB layout constraints.

Frequently Asked Questions (FAQ)

Q: Can TS01ASE directly replace TS01AME without circuit modification? A: Yes. TS01ASE is electrically and mechanically identical to TS01AME, with matching 3A current rating, 120V AC / 28V DC voltage specifications, and identical mounting configuration. No circuit modification is required.

Q: What is the key difference between primary and secondary substitute groups? A: Primary substitutes (TS01ASE, 48BFSP1M6QT, 500ASSP1M6QE) maintain the 3A current rating and 120V AC voltage specification of the original TS01AME. Secondary substitutes (1571984-1, 48BFSP1M6RT, 500ASSP1M6RE, AS12AH, AS12CH) are rated for 0.4VA at reduced voltages and are suitable only where circuit design permits lower electrical specifications.

Q: Are there mechanical differences between substitute parts? A: Yes. Actuator length, switch travel distance, and contact material vary across substitute parts. TS01ASE maintains identical mechanical specifications to TS01AME. Other substitutes may require PCB layout validation due to differences in actuator length (ranging from 2.50mm to 3.80mm) and switch travel (1.90mm to 3.05mm).

Q: What is the impact of reduced electrical life ratings in alternative substitutes? A: TS01AME and TS01ASE are rated for 60,000 electrical cycles. Grayhill and E-Switch alternatives are rated for 30,000 cycles, while NKK Switches alternatives are rated for 50,000 cycles. Selection should account for application duty cycle requirements.

Q: Are all substitute parts ROHS3 compliant? A: Yes. All listed substitute parts maintain ROHS3 compliance and MSL rating of 1 (Unlimited), matching the environmental and regulatory status of the original TS01AME.

Q: What packaging options are available for substitute parts? A: TS01ASE, 48BFSP1M6QT, 48BFSP1M6RT, 500ASSP1M6QE, and 500ASSP1M6RE are supplied in Bulk packaging. AS12AH, AS12CH, and 500RSP1S1M6RE are supplied in Tray packaging. Packaging selection may impact procurement and assembly processes.