Request Quote
(Ships tomorrow)
TRSF3222IPW RS232 Transceiver Equivalent & Substitute Parts
Part Overview
The TRSF3222IPW is a 2/2 full-duplex RS232 transceiver manufactured by Texas Instruments in a 20-TSSOP surface mount package. This part is classified as obsolete, with 989 units currently in stock. Due to its obsolete status, identifying equivalent and substitute parts is necessary for ongoing design support, production continuity, and long-term component availability. Substitute parts must maintain compatibility across electrical specifications, mechanical packaging, and functional performance parameters.
Substiute Parts
Key Parameters
| Parameter | TRSF3222IPW |
|---|---|
| Manufacturer | Texas Instruments |
| Type | Transceiver |
| Protocol | RS232 |
| Drivers/Receivers | 2/2 |
| Duplex | Full |
| Receiver Hysteresis | 300 mV |
| Data Rate | 1 Mbps |
| Supply Voltage | 3V ~ 5.5V |
| Operating Temperature | -40°C ~ 85°C |
| Package / Case | 20-TSSOP (0.173", 4.40mm Width) |
| Mounting Type | Surface Mount |
| RoHS Status | ROHS3 Compliant |
| MSL Rating | 1 (Unlimited) |
Substitute Part Grouping Explanation
Substitution eligibility for the TRSF3222IPW is determined by the following critical parameters:
- Package / Case: All substitutes must use 20-TSSOP (0.173", 4.40mm Width) surface mount packaging for PCB layout compatibility
- Protocol: RS232 full-duplex transceiver functionality is mandatory
- Drivers/Receivers Configuration: 2/2 configuration required
- Supply Voltage Range: 3V ~ 5.5V operating range
- Operating Temperature Range: Minimum -40°C ~ 85°C support
- Receiver Hysteresis: 300 mV specification (500 mV variants acceptable with design verification)
- Data Rate: 1 Mbps minimum performance (lower rates acceptable for legacy applications)
- RoHS Compliance: ROHS3 compliance required for regulatory alignment
Substitute parts are grouped into three categories: direct manufacturer equivalents from Texas Instruments, parametric equivalents from alternative manufacturers, and manufacturer-recommended alternatives. All listed substitutes maintain identical package geometry and core RS232 transceiver functionality.
Parameter Comparison
| Part Number | Manufacturer | Product Status | Data Rate | Receiver Hysteresis | Operating Temp | Packaging | RoHS Status | MSL Rating | Inventory |
|---|---|---|---|---|---|---|---|---|---|
| TRSF3222IPW | Texas Instruments | Obsolete | 1 Mbps | 300 mV | -40°C ~ 85°C | 20-TSSOP | ROHS3 | 1 | 989 Pcs |
| TRSF3222EIPWR | Texas Instruments | Active | 500 kbps | 300 mV | -40°C ~ 85°C | 20-TSSOP | ROHS3 | 1 | 2780 Pcs |
| SN65C3222PW | Texas Instruments | Last Time Buy | 1 Mbps | 300 mV | -40°C ~ 85°C | 20-TSSOP | ROHS3 | 1 | 960 Pcs |
| MAX3222EEUP+ | Analog Devices Inc./Maxim Integrated | Active | 1 Mbps | 500 mV | -40°C ~ 85°C | 20-TSSOP | ROHS3 | 1 | 2987 Pcs |
| MAX3222EEUP+T | Analog Devices Inc./Maxim Integrated | Active | 1 Mbps | 500 mV | -40°C ~ 85°C | 20-TSSOP | ROHS3 | 1 | 45400 Pcs |
| MAX3222EEUP/V+ | Analog Devices Inc./Maxim Integrated | Active | 250 kbps | 500 mV | -40°C ~ 85°C | 20-TSSOP | ROHS3 | 1 | 774 Pcs |
| ST3222EBTR | STMicroelectronics | Active | 250 kbps | 500 mV | -40°C ~ 85°C | 20-TSSOP | ROHS3 | 3 | 1256 Pcs |
| SP3222EBEY-L/TR | MaxLinear, Inc. | Active | 250 kbps | 300 mV | -40°C ~ 85°C | 20-TSSOP | RoHS Compliant | 1 | 782 Pcs |
| SP3222ECY-L/TR | MaxLinear, Inc. | Active | 235 kbps | 300 mV | 0°C ~ 70°C | 20-TSSOP | ROHS3 | 1 | 2170 Pcs |
| SP3222EEY-L/TR | MaxLinear, Inc. | Active | 235 kbps | 300 mV | -40°C ~ 85°C | 20-TSSOP | ROHS3 | 1 | 18633 Pcs |
| SP3222EUCY-L/TR | MaxLinear, Inc. | Active | 1 Mbps | 300 mV | 0°C ~ 70°C | 20-TSSOP | RoHS Compliant | 1 | 22700 Pcs |
Engineering Selection Recommendations
Direct Texas Instruments Equivalents
TRSF3222EIPWR is an active product from Texas Instruments with identical package and electrical specifications to the obsolete TRSF3222IPW, with the exception of reduced data rate (500 kbps vs. 1 Mbps). This part is suitable for applications where the lower data rate does not impact system performance. SN65C3222PW maintains full 1 Mbps performance and identical receiver hysteresis but carries Last Time Buy status, indicating limited future availability.
Maxim Integrated (Analog Devices) Alternatives
MAX3222EEUP+T offers the highest inventory availability (45400 units) with full 1 Mbps data rate and active product status. The 500 mV receiver hysteresis specification differs from the original 300 mV but remains within acceptable RS232 transceiver tolerances. Packaging is available in Cut Tape (CT) & Digi-Reel format. MAX3222EEUP+ and MAX3222EEUP/V+ provide alternative packaging options with active status but lower inventory levels.
STMicroelectronics Alternative
ST3222EBTR is an active product with 1256 units in stock. The MSL rating of 3 (168 Hours) differs from the original MSL 1 rating, requiring moisture control during storage and handling. Data rate is reduced to 250 kbps.
MaxLinear Alternatives
SP3222EEY-L/TR provides the largest inventory (18633 units) with active status, full -40°C ~ 85°C operating range, and 300 mV receiver hysteresis matching the original specification. Data rate is 235 kbps. SP3222EUCY-L/TR matches the original 1 Mbps data rate and 300 mV hysteresis but operates only at 0°C ~ 70°C temperature range. SP3222ECY-L/TR and SP3222EBEY-L/TR offer alternative configurations with reduced operating temperature ranges or data rates.
All substitute parts maintain ROHS3 compliance or equivalent RoHS certification and are available in the required 20-TSSOP package. Selection should prioritize active product status and inventory availability for long-term supply chain stability.
Frequently Asked Questions (FAQ)
Q: Can MAX3222EEUP+T replace TRSF3222IPW directly?
A: Yes. Both parts are 2/2 full-duplex RS232 transceivers in 20-TSSOP packaging with identical supply voltage (3V ~ 5.5V) and operating temperature range (-40°C ~ 85°C). The receiver hysteresis differs (500 mV vs. 300 mV) and data rate is identical at 1 Mbps. The higher hysteresis specification does not prevent functional substitution in standard RS232 applications.
Q: What is the difference between SP3222EEY-L/TR and SP3222EUCY-L/TR?
A: Both are MaxLinear RS232 transceivers in 20-TSSOP packaging with 300 mV receiver hysteresis. SP3222EEY-L/TR operates across -40°C ~ 85°C with 235 kbps data rate and has 18633 units in stock. SP3222EUCY-L/TR operates at 0°C ~ 70°C with 1 Mbps data rate and has 22700 units in stock. Selection depends on required operating temperature range and data rate requirements.
Q: Why does ST3222EBTR have MSL 3 rating instead of MSL 1?
A: MSL (Moisture Sensitivity Level) 3 indicates the component requires moisture control during storage and handling, with a floor life of 168 hours after bag opening. MSL 1 components have unlimited floor life. ST3222EBTR requires proper moisture management during assembly but is otherwise functionally equivalent. This affects handling procedures, not electrical performance.
Q: Is SN65C3222PW a suitable long-term replacement?
A: SN65C3222PW is a parametric equivalent with full 1 Mbps performance and 300 mV receiver hysteresis matching the original TRSF3222IPW. However, it carries Last Time Buy status, indicating limited future availability. It is suitable for immediate replacement but not recommended for new long-term designs due to supply constraints.
Q: Can I use parts with lower data rates (250 kbps or 235 kbps) as substitutes?
A: Lower data rate parts are functionally compatible if system requirements do not exceed their specified maximum data rate. ST3222EBTR (250 kbps), SP3222EBEY-L/TR (250 kbps), SP3222ECY-L/TR (235 kbps), and SP3222EEY-L/TR (235 kbps) are all valid substitutes for applications operating below their rated data rates. Verify application data rate requirements before selection.
Q: What packaging formats are available for these substitutes?
A: All substitute parts use 20-TSSOP (0.173", 4.40mm Width) surface mount packaging. Packaging formats vary: MAX3222EEUP+T is available in Cut Tape (CT) & Digi-Reel format; MAX3222EEUP+ and MAX3222EEUP/V+ are available in Tube; SP3222 variants are available in Tape & Reel (TR) or Cut Tape (CT) & Digi-Reel formats. Verify packaging availability with your supplier for production requirements.
Q: Are all substitutes RoHS compliant?
A: All listed substitutes are RoHS compliant. Most carry ROHS3 certification. SP3222EUCY-L/TR and SP3222EBEY-L/TR are marked as RoHS Compliant without specific version designation. All parts meet current regulatory requirements for RoHS compliance.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts




