TRSF3221ECDBR RS232 Transceiver Equivalent & Substitute Parts

Part Overview

The TRSF3221ECDBR is a full-duplex RS232 transceiver manufactured by Texas Instruments, designed for serial communication applications requiring 1/1 driver/receiver configuration. This device operates across a 3V to 5.5V supply range with a 1 Mbps data rate and is packaged in a 16-SSOP surface-mount form factor. The part is currently in Active product status with 1600 units in stock.

Equivalent and substitute parts become necessary when the primary part reaches end-of-life status, inventory constraints occur, or design flexibility is required for supply chain optimization. The substitute parts listed maintain electrical and mechanical compatibility within the defined parameter tolerances for this product category.

Key Parameters

Parameter	Value
Transceiver Type	Full-Duplex RS232
Driver/Receiver Configuration	1/1
Data Rate	1 Mbps
Supply Voltage Range	3V to 5.5V
Receiver Hysteresis	500 mV
Operating Temperature	0°C to 70°C
Package Type	16-SSOP (0.209", 5.30mm Width)
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict parameter matching across the following critical criteria:

Primary Substitution Parameters:

Protocol: RS232
Driver/Receiver Configuration: 1/1
Duplex Mode: Full
Package/Case: 16-SSOP (0.209", 5.30mm Width)
Supply Voltage Range: 3V to 5.5V
Operating Temperature: 0°C to 70°C
Mounting Type: Surface Mount
RoHS Compliance: ROHS3 Compliant

Secondary Consideration Parameters:

Data Rate: 1 Mbps (primary specification)
Receiver Hysteresis: 500 mV (primary specification)
Moisture Sensitivity Level: 1 (Unlimited) for primary part

Substitute parts are classified into two categories:

Parametric Equivalents maintain all critical electrical and mechanical parameters. These parts may differ in product status, packaging format (Tape & Reel vs. Cut Tape), or manufacturer variant codes, but are functionally interchangeable in circuit design.

Direct Manufacturer Equivalents are alternative part numbers from different manufacturers (Renesas Electronics Corporation) that meet the same functional requirements. These parts may exhibit variations in secondary parameters such as data rate (250 kbps vs. 1 Mbps) or receiver hysteresis (300 mV vs. 500 mV), requiring engineering evaluation for specific applications.

Parameter Comparison

Part Number	Manufacturer	Data Rate	Receiver Hysteresis	Product Status	Packaging	Inventory
TRSF3221ECDBR	Texas Instruments	1 Mbps	500 mV	Active	Cut Tape (CT)	1600 Pcs
MAX3227CDBR	Texas Instruments	1 Mbps	500 mV	Last Time Buy	Tape & Reel (TR)	2860 Pcs
MAX3227ECDBR	Texas Instruments	1 Mbps	500 mV	Last Time Buy	Cut Tape (CT) & Digi-Reel®	2040 Pcs
SN75C3221DBR	Texas Instruments	1 Mbps	500 mV	Active	Tape & Reel (TR)	3650 Pcs
SN75C3221EDBR	Texas Instruments	1 Mbps	500 mV	Last Time Buy	Tape & Reel (TR)	2060 Pcs
TRS3227ECDBR	Texas Instruments	1 Mbps	500 mV	Last Time Buy	Tape & Reel (TR)	2919 Pcs
TRSF3221CDBR	Texas Instruments	1 Mbps	500 mV	Last Time Buy	Tape & Reel (TR)	1410 Pcs
ICL3221CAZ	Renesas Electronics	250 kbps	300 mV	Active	Tube	5100 Pcs
ICL3221CAZ-T	Renesas Electronics	250 kbps	300 mV	Active	Cut Tape (CT) & Digi-Reel®	5400 Pcs
ICL3221ECAZ	Renesas Electronics	250 kbps	500 mV	Active	Tube	8175 Pcs
ICL3221ECAZ-T	Renesas Electronics	250 kbps	500 mV	Active	Tape & Reel (TR)	1613 Pcs

Engineering Selection Recommendations

For Direct Substitution (Full Electrical Compatibility):

Select from Texas Instruments parametric equivalents when maintaining identical electrical performance is required: MAX3227CDBR, MAX3227ECDBR, SN75C3221DBR, SN75C3221EDBR, TRS3227ECDBR, or TRSF3221CDBR. These parts maintain 1 Mbps data rate and 500 mV receiver hysteresis specifications. SN75C3221DBR and TRSF3221CDBR are recommended for new designs due to Active product status, ensuring long-term availability and supply continuity.

For Alternative Manufacturer Selection:

Renesas Electronics ICL3221 series parts (ICL3221ECAZ or ICL3221ECAZ-T) provide Active product status with high inventory availability (8175 and 1613 units respectively). These parts maintain 500 mV receiver hysteresis matching the primary specification but operate at 250 kbps data rate. Selection of ICL3221 variants is appropriate only when application data rates do not exceed 250 kbps and circuit design accommodates reduced bandwidth requirements.

Packaging Considerations:

For automated assembly processes, Tape & Reel (TR) packaging is standard. Cut Tape (CT) and Digi-Reel® formats are suitable for manual assembly or lower-volume production. Tube packaging (ICL3221CAZ, ICL3221ECAZ) is appropriate for manual handling and small-quantity applications.

Compliance and Regulatory:

All listed parts maintain ROHS3 compliance and REACH Unaffected status, meeting current environmental and regulatory requirements. Moisture Sensitivity Level 1 (Unlimited) for Texas Instruments parts and Level 3 (168 Hours) for Renesas parts require appropriate handling protocols during storage and assembly.

Frequently Asked Questions (FAQ)

Q: Can I use MAX3227ECDBR as a direct replacement for TRSF3221ECDBR?

A: Yes. MAX3227ECDBR is a parametric equivalent maintaining identical electrical specifications: 1 Mbps data rate, 500 mV receiver hysteresis, 3V to 5.5V supply range, and 16-SSOP package. The primary difference is packaging format (Cut Tape & Digi-Reel® vs. Cut Tape) and product status (Last Time Buy vs. Active). Circuit functionality remains unchanged.

Q: What is the difference between SN75C3221DBR and SN75C3221EDBR?

A: Both parts are parametric equivalents with identical electrical specifications. SN75C3221DBR maintains Active product status with 3650 units in stock, while SN75C3221EDBR is Last Time Buy status with 2060 units. For new designs, SN75C3221DBR is preferred due to extended availability.

Q: Can I substitute ICL3221ECAZ-T for TRSF3221ECDBR?

A: Substitution is possible with design considerations. ICL3221ECAZ-T maintains 500 mV receiver hysteresis and 3V to 5.5V supply range but operates at 250 kbps data rate versus 1 Mbps. This part is suitable only if application requirements do not exceed 250 kbps bandwidth. Moisture Sensitivity Level 3 (168 Hours) requires stricter handling compared to Level 1 for the primary part.

Q: Why do some parts show "Last Time Buy" status?

A: Last Time Buy status indicates the manufacturer has announced end-of-life for that part number. Existing inventory remains available for purchase, but no future production is planned. For long-term supply security, select parts with Active status such as SN75C3221DBR, TRSF3221ECDBR, or ICL3221 series variants.

Q: Are all listed parts in the same package footprint?

A: Yes. All parts use 16-SSOP (0.209", 5.30mm Width) surface-mount package with identical pin configuration and PCB footprint. Packaging format differences (Tube, Cut Tape, Tape & Reel, Digi-Reel®) refer to supply and handling methods, not physical component dimensions.

Q: What is the significance of receiver hysteresis differences?

A: Receiver hysteresis affects noise immunity and switching threshold characteristics. TRSF3221ECDBR specifies 500 mV hysteresis. ICL3221CAZ and ICL3221CAZ-T specify 300 mV hysteresis, providing tighter threshold control but potentially reduced noise margin in noisy environments. ICL3221ECAZ and ICL3221ECAZ-T match the 500 mV specification.

Q: Can I mix different part numbers in the same production batch?

A: Yes, provided all selected parts meet the application's electrical requirements. Mixing parts with different data rates (1 Mbps vs. 250 kbps) or receiver hysteresis values (500 mV vs. 300 mV) is acceptable if circuit design accommodates the lowest common specification. Verify moisture sensitivity level handling procedures are consistent across all parts used.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message