TRR01MZPJ152 Equivalent & Substitute Parts

Part Overview

The TRR01MZPJ152 is a 1.5 kOhms ±5% thick film chip resistor in 0402 (1005 Metric) package rated at 0.063W (1/16W) with anti-sulfur coating. Manufactured by Rohm Semiconductor, this part is classified as obsolete. Due to its obsolete status and limited availability relative to active alternatives, identifying equivalent and substitute parts is necessary for design continuity and procurement flexibility.

Key Parameters

Parameter	Value
Resistance	1.5 kOhms
Tolerance	±5%
Power Rating	0.063W (1/16W)
Package	0402 (1005 Metric)
Composition	Thick Film
Features	Anti-Sulfur
Operating Temperature	-55°C to 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Direct Equivalents maintain all critical electrical and mechanical parameters: 1.5 kOhms resistance, ±5% tolerance, 0.063W power rating, 0402 package, anti-sulfur coating, and -55°C to 155°C operating range.

Upgraded Substitutes improve one or more parameters while maintaining core compatibility: enhanced tolerance (±1% vs ±5%), increased power rating (0.1W vs 0.063W), or automotive qualification (AEC-Q200). These parts are electrically and mechanically compatible but offer superior performance characteristics.

Compatibility Basis: All substitute parts share the same 0402 package footprint, identical resistance value, compatible operating temperature range, and RoHS3 compliance. Differences in tolerance, power rating, and automotive certification do not prevent functional substitution in applications where the original part specifications are met or exceeded.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Features	Temp Coeff	Operating Temp	Status	AEC-Q200
TRR01MZPJ152	Rohm	1.5 kΩ	±5%	0.063	0402	Anti-Sulfur	±200ppm/°C	-55 to 155°C	Obsolete	No
SFR01MZPJ152	Rohm	1.5 kΩ	±5%	0.063	0402	Anti-Sulfur, AEC-Q200	±200ppm/°C	-55 to 155°C	Active	Yes
AF0402JR-071K5L	YAGEO	1.5 kΩ	±5%	0.063	0402	Anti-Sulfur, AEC-Q200	±100ppm/°C	-55 to 155°C	Active	Yes
TRR01MZPF1501	Rohm	1.5 kΩ	±1%	0.063	0402	Anti-Sulfur	±100ppm/°C	-55 to 155°C	Obsolete	No
ERJ-S02J152X	Panasonic	1.5 kΩ	±5%	0.1	0402	Anti-Sulfur, AEC-Q200	±200ppm/°C	-55 to 155°C	Active	Yes
ERJ-S02F1501X	Panasonic	1.5 kΩ	±1%	0.1	0402	Anti-Sulfur, AEC-Q200	±200ppm/°C	-55 to 155°C	Active	Yes

Engineering Selection Recommendations

For Direct Replacement (Active Status Priority): SFR01MZPJ152 is the primary direct equivalent. Manufactured by Rohm Semiconductor, it maintains identical electrical specifications (1.5 kΩ ±5%, 0.063W) and mechanical compatibility while offering active product status and AEC-Q200 automotive qualification. This part is recommended for applications requiring Rohm sourcing continuity.

For Cross-Manufacturer Substitution: AF0402JR-071K5L (YAGEO) provides equivalent performance with active status and AEC-Q200 qualification. The temperature coefficient is improved to ±100ppm/°C. This part is suitable for applications where manufacturer diversification is acceptable.

For Enhanced Tolerance Requirements: TRR01MZPF1501 (Rohm, ±1% tolerance) or ERJ-S02F1501X (Panasonic, ±1% tolerance, 0.1W) are available when tighter tolerance specifications are required. Both maintain the 0402 package and anti-sulfur coating. ERJ-S02F1501X additionally provides increased power rating and AEC-Q200 certification.

For Increased Power Margin: ERJ-S02J152X and ERJ-S02F1501X both offer 0.1W power rating (versus 0.063W original), providing additional thermal headroom. Both are active products with AEC-Q200 qualification and anti-sulfur coating.

For Automotive Applications: SFR01MZPJ152, AF0402JR-071K5L, ERJ-S02J152X, and ERJ-S02F1501X all carry AEC-Q200 certification and are suitable for automotive-grade applications.

Frequently Asked Questions (FAQ)

Q: Can SFR01MZPJ152 directly replace TRR01MZPJ152? A: Yes. Both parts share identical electrical specifications (1.5 kΩ ±5%, 0.063W), package (0402), and operating temperature range (-55°C to 155°C). SFR01MZPJ152 is the active equivalent with improved product status and automotive qualification.

Q: What is the difference between ±5% and ±1% tolerance parts? A: Tolerance defines the maximum deviation from the nominal resistance value. ±5% tolerance allows ±75 Ohms deviation from 1.5 kΩ (1.425–1.575 kΩ range), while ±1% tolerance allows ±15 Ohms deviation (1.485–1.515 kΩ range). Applications requiring tighter resistance control should specify ±1% parts.

Q: Are 0.063W and 0.1W power ratings interchangeable? A: Yes, for substitution purposes. A 0.1W part can replace a 0.063W part in any application. The higher power rating provides additional thermal margin and does not negatively affect circuit performance. The reverse substitution (0.063W replacing 0.1W) is not recommended if the application requires the higher power capability.

Q: What does AEC-Q200 certification mean? A: AEC-Q200 is an automotive qualification standard for passive components. Parts bearing this certification meet automotive industry reliability and performance requirements. AEC-Q200 parts are suitable for both automotive and general industrial applications.

Q: Can I substitute a Panasonic part for a Rohm part? A: Yes. ERJ-S02J152X and ERJ-S02F1501X are functionally equivalent to the TRR01MZPJ152 and maintain all critical parameters. Cross-manufacturer substitution is acceptable when electrical and mechanical specifications align and compliance requirements are met.

Q: Does the 0402 package footprint remain identical across all substitute parts? A: Yes. All listed substitute parts use the 0402 (1005 Metric) package with identical footprint dimensions (0.039" L × 0.020" W, 1.00mm × 0.50mm). PCB layout modifications are not required for substitution.

Q: Are all substitute parts RoHS3 compliant? A: Yes. All parts listed maintain ROHS3 compliance, ensuring compatibility with RoHS-regulated supply chains and applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message