TPSE337M016S0200 Equivalent & Substitute Parts

Part Overview

The TPSE337M016S0200 is a 330 µF molded tantalum capacitor manufactured by KYOCERA AVX, rated for 16 V operation in a 2917 (7343 Metric) surface mount package. This component is classified as Active product status and is ROHS3 compliant. Substitute parts are identified when equivalent electrical and mechanical parameters align with application requirements, enabling component procurement flexibility while maintaining circuit performance specifications.

Substiute Parts

TPSE337M016S0200

KYOCERA AVXIn Stock: 1173TPSE337M016S0200 Datasheet

Current PartRFQ

TPME337K016R0050

KYOCERA AVXIn Stock: 2398TPME337K016R0050 Datasheet

Parametric EquivalentRFQ

TPME337M016R0050

KYOCERA AVXIn Stock: 3183TPME337M016R0050 Datasheet

Parametric EquivalentRFQ

TPSE337M016R0200

KYOCERA AVXIn Stock: 3379TPSE337M016R0200 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TPSE337M016S0200 is determined by the following criteria:

Primary Matching Parameters:

• Capacitance: 330 µF (exact match required)
• Voltage Rating: 16 V (exact match required)
• Package / Case: 2917 (7343 Metric) (exact match required)
• Operating Temperature Range: -55°C to 125°C (exact match required)
• Mounting Type: Surface Mount (exact match required)

Variable Parameters Allowing Substitution:

• Tolerance: ±20% or ±10% acceptable
• ESR @ 100kHz: 200 mOhm or 50 mOhm acceptable
• Moisture Sensitivity Level (MSL): 1 (Unlimited) or 3 (168 Hours) acceptable
• Series designation: TPS or TPM acceptable

All identified substitute parts maintain identical capacitance, voltage rating, package dimensions, and thermal specifications as the main part, with variations only in tolerance grade, ESR performance, and moisture sensitivity classification.

Parameter Comparison

Engineering Selection Recommendations

TPSE337M016R0200: Direct equivalent to the main part with identical electrical specifications (330 µF, ±20% tolerance, 200 mOhm ESR) and MSL rating. Suitable for applications with no moisture sensitivity constraints. Higher inventory availability (3300 Pcs) supports procurement continuity.

TPME337M016R0050: Maintains capacitance, voltage, and tolerance specifications identical to the main part. Offers superior ESR performance (50 mOhm versus 200 mOhm), beneficial for low-impedance applications. MSL 3 rating requires controlled storage conditions (168 hours maximum exposure). Suitable for designs prioritizing low ESR characteristics.

TPME337K016R0050: Provides tighter tolerance (±10% versus ±20%) and superior ESR performance (50 mOhm). MSL 3 rating applies. Recommended for precision applications requiring enhanced capacitance stability and reduced impedance. Inventory availability (2342 Pcs) supports standard procurement volumes.

All substitute parts maintain ROHS3 compliance and identical operating temperature range (-55°C to 125°C) with 2000-hour lifetime rating at 125°C.

Frequently Asked Questions (FAQ)

Q: Can TPME337M016R0050 replace TPSE337M016S0200 in all applications?

A: TPME337M016R0050 is electrically compatible with identical capacitance (330 µF), voltage rating (16 V), and tolerance (±20%). The primary difference is MSL classification: TPME337M016R0050 is MSL 3 (168 hours maximum exposure), while TPSE337M016S0200 is MSL 1 (unlimited). Applications requiring extended storage without moisture control should use MSL 1 rated parts. The superior ESR (50 mOhm) of TPME337M016R0050 benefits low-impedance circuit designs.

Q: What is the significance of ESR differences between 200 mOhm and 50 mOhm?

A: ESR (Equivalent Series Resistance) affects impedance characteristics and thermal performance. Lower ESR (50 mOhm) reduces impedance and heat generation, beneficial for high-frequency filtering and low-noise applications. Higher ESR (200 mOhm) is acceptable for general-purpose filtering where impedance is not a critical constraint. Both values support the specified operating temperature range and lifetime rating.

Q: Are TPSE337M016R0200 and TPSE337M016S0200 interchangeable?

A: Yes. Both parts are identical in electrical specifications (330 µF, ±20%, 16 V, 200 mOhm ESR) and MSL rating (1 - Unlimited). The only difference is packaging designation (R versus S suffix), which does not affect functional performance or mechanical compatibility in the 2917 (7343 Metric) package.

Q: What does MSL 3 (168 Hours) mean for component handling?

A: MSL 3 classification requires that the component be used within 168 hours of moisture exposure. Components must be stored in controlled humidity environments and baked before reflow soldering if storage time exceeds specified limits. MSL 1 (Unlimited) parts have no such time constraints and are suitable for standard warehouse storage conditions.

Q: Can TPME337K016R0050 be used where ±20% tolerance is specified?

A: Yes. TPME337K016R0050 has ±10% tolerance, which is tighter than the ±20% specification. Tighter tolerance components are functionally compatible with applications designed for ±20% tolerance, as they fall within the acceptable range. This substitution provides enhanced capacitance stability without circuit redesign.