TPS62004DGSG4 Equivalent & Substitute Parts

Part Overview

The TPS62004DGSG4 is a buck switching regulator IC from Texas Instruments designed for positive fixed 1.5V output applications. This device delivers 600mA output current with an input voltage range of 2.5V to 5.5V, operating at a switching frequency of 750kHz with integrated synchronous rectification. The part is currently discontinued at DiGi Electronics, making identification of active equivalent parts essential for ongoing production and design continuity.

Substiute Parts

TPS62004DGSG4

Texas InstrumentsIn Stock: 773TPS62004DGSG4 Datasheet

Current PartRFQ

TPS62004DGS

Texas InstrumentsIn Stock: 3083TPS62004DGS Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TPS62004DGSG4 is determined by strict equivalence across the following critical parameters:

• Input voltage range: 2.5V to 5.5V
• Fixed output voltage: 1.5V
• Output current capacity: 600mA
• Switching topology: Buck (step-down)
• Switching frequency: 750kHz
• Synchronous rectification: Integrated
• Package type: 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) / 10-VSSOP
• Operating temperature range: -40°C to 85°C
• Regulatory compliance: ROHS3, REACH Unaffected

The TPS62004DGS meets all substitution criteria as a direct equivalent, differing only in packaging format (Tube vs. standard packaging) and product status (Active vs. Discontinued).

Parameter Comparison

Engineering Selection Recommendations

The TPS62004DGS is a direct functional and electrical equivalent to the TPS62004DGSG4. Both parts share identical electrical specifications, thermal operating range, and regulatory compliance certifications (ROHS3 Compliant, REACH Unaffected). The primary distinction is product availability status: the TPS62004DGSG4 is discontinued, while the TPS62004DGS remains in active production with higher inventory availability (3042 Pcs vs. 735 Pcs). The packaging format difference (Tube vs. standard) does not affect electrical performance or PCB-level compatibility. Selection of the TPS62004DGS is appropriate for new designs and production continuity where the original part number is no longer available through distribution channels.

Frequently Asked Questions (FAQ)

Q: Can the TPS62004DGS be used as a direct replacement for the TPS62004DGSG4 in existing designs?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters. The TPS62004DGS operates at the same input voltage range (2.5V–5.5V), delivers the same fixed 1.5V output at 600mA, and uses the same 10-VSSOP package footprint. No circuit modifications are required.

Q: What is the difference between the TPS62004DGSG4 and TPS62004DGS part numbers?

A: The difference is in packaging format and product status. The TPS62004DGSG4 is supplied in standard packaging and is currently discontinued. The TPS62004DGS is supplied in Tube packaging and remains in active production. The suffix designations reflect packaging and distribution method only, not electrical performance.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical regulatory certifications: ROHS3 Compliant, REACH Unaffected, and Moisture Sensitivity Level 1 (Unlimited). They meet the same environmental and safety standards.

Q: What is the switching frequency of these regulators?

A: Both the TPS62004DGSG4 and TPS62004DGS operate at a fixed switching frequency of 750kHz with integrated synchronous rectification for improved efficiency.

Q: Can these parts handle input voltages outside the 2.5V–5.5V range?

A: No. Both parts are specified for input voltages between 2.5V minimum and 5.5V maximum. Operation outside this range is not supported and may result in device damage or malfunction.