TPS3896ADRYR Equivalent & Substitute Parts

Part Overview

The TPS3896ADRYR is an active low reset supervisor integrated circuit manufactured by Texas Instruments, designed for power management applications requiring single-channel voltage monitoring and push-pull output control. This device operates across the industrial temperature range of -40°C to 125°C and is housed in a compact 6-SON surface mount package. The part maintains Active product status and is ROHS3 compliant with unlimited moisture sensitivity rating. Substitute parts become necessary when addressing supply chain constraints, inventory availability, or specific packaging requirements while maintaining identical electrical and mechanical specifications.

Substiute Parts

TPS3896ADRYR

Texas InstrumentsIn Stock: 19791TPS3896ADRYR Datasheet

Current PartRFQ

TPS3896ADRYT

Texas InstrumentsIn Stock: 1589TPS3896ADRYT Datasheet

Parametric EquivalentRFQ

TPS3896PDRYR

Texas InstrumentsIn Stock: 4010TPS3896PDRYR Datasheet

Parametric EquivalentRFQ

TPS3896PDRYT

Texas InstrumentsIn Stock: 1147TPS3896PDRYT Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TPS3896ADRYR is determined by strict parametric equivalence across all electrical and mechanical specifications. All substitute parts must maintain identical values for the following critical parameters: single-channel voltage monitoring capability, adjustable/selectable voltage threshold configuration, push-pull totem pole output topology, active low reset logic, adjustable/selectable reset timeout, operating temperature range of -40°C to 125°C, surface mount mounting type, 6-UFDFN package configuration, and 6-SON (1.45x1) supplier device package specification. Additionally, all substitute parts must maintain Active product status, ROHS3 compliance, MSL Level 1 rating, and REACH Unaffected status. The three identified substitute parts—TPS3896ADRYT, TPS3896PDRYR, and TPS3896PDRYT—satisfy all these parametric requirements and are therefore direct electrical and mechanical equivalents suitable for component selection without design modification.

Parameter Comparison

Engineering Selection Recommendations

All four parts—TPS3896ADRYR, TPS3896ADRYT, TPS3896PDRYR, and TPS3896PDRYT—are functionally equivalent and maintain Active product status with full ROHS3 compliance and REACH Unaffected certification. Selection between these parts should be based on inventory availability and packaging requirements. The TPS3896ADRYR maintains the highest current inventory at 19,691 pieces. The TPS3896PDRYR offers 3,988 pieces in stock, while TPS3896ADRYT and TPS3896PDRYT provide 1,489 and 1,087 pieces respectively. All parts are supplied in Tape & Reel packaging format and are suitable for direct substitution in applications requiring single-channel voltage supervision with adjustable thresholds and active low reset output.

Frequently Asked Questions (FAQ)

Q: Are all listed substitute parts electrically identical to the TPS3896ADRYR?

A: Yes. All substitute parts maintain identical electrical specifications including single-channel voltage monitoring, adjustable/selectable voltage threshold, push-pull totem pole output, active low reset logic, and adjustable/selectable reset timeout across the full -40°C to 125°C operating temperature range.

Q: What is the difference between TPS3896ADRYR and TPS3896PDRYR?

A: Both parts are parametric equivalents with identical electrical and mechanical specifications. The difference lies in internal device configuration or manufacturing process variant, but this does not affect functional performance or pin compatibility in circuit applications.

Q: Can these parts be used interchangeably on the same PCB?

A: Yes. All substitute parts share identical 6-SON (1.45x1) package dimensions, pin configuration, and electrical characteristics, enabling direct board-level substitution without design modification.

Q: Are all parts compliant with current regulatory requirements?

A: Yes. All parts maintain ROHS3 compliance and REACH Unaffected status, meeting current environmental and regulatory standards for electronic component manufacturing and distribution.

Q: What packaging format is used for these parts?

A: All parts are supplied in Tape & Reel (TR) format, standard for surface mount component distribution and automated assembly processes.