TPS2829DBVTG4 Equivalent & Substitute Parts

Part Overview

The TPS2829DBVTG4 is a low-side gate driver IC manufactured by Texas Instruments, designed for driving N-channel MOSFETs in power management applications. This device operates with a supply voltage range of 4V to 14V and delivers peak output currents of 2A (source and sink). The TPS2829DBVTG4 is currently discontinued at DiGi Electronics, making identification of equivalent substitute parts essential for ongoing design support and production continuity.

Substiute Parts

TPS2829DBVTG4

Texas InstrumentsIn Stock: 880TPS2829DBVTG4 Datasheet

Current PartRFQ

TPS2829DBVT

Texas InstrumentsIn Stock: 5904TPS2829DBVT Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TPS2829DBVTG4 is determined by strict equivalence across the following critical parameters:

• Driven Configuration: Low-Side operation only
• Channel Type: Single channel
• Gate Type: N-Channel MOSFET driver
• Voltage - Supply: 4V ~ 14V range
• Logic Voltage Thresholds: VIL = 1V, VIH = 4V
• Current - Peak Output: 2A source and 2A sink capability
• Input Type: Non-Inverting logic
• Rise / Fall Time: 14ns typical for both edges
• Operating Temperature Range: -40°C ~ 125°C
• Package / Case: SC-74A, SOT-753 (SOT-23-5)
• Compliance: ROHS3 Compliant, REACH Unaffected

The substitute part TPS2829DBVT meets all these criteria and is therefore electrically and mechanically equivalent.

Parameter Comparison

Engineering Selection Recommendations

The TPS2829DBVT is the direct substitute for the discontinued TPS2829DBVTG4. Both parts are manufactured by Texas Instruments and share identical electrical specifications and package configurations. The TPS2829DBVT carries a product status of Last Time Buy, indicating continued availability with defined end-of-life support. Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements for current and future applications.

Selection between these parts should be based on inventory availability and supply chain considerations. The TPS2829DBVT is currently available in higher quantities (5882 Pcs) compared to the TPS2829DBVTG4 (837 Pcs), making it the preferred choice for new designs and production continuity.

Frequently Asked Questions (FAQ)

Q: Can TPS2829DBVT be used as a direct replacement for TPS2829DBVTG4?

A: Yes. Both parts are electrically and mechanically equivalent. They share identical supply voltage ranges (4V ~ 14V), logic thresholds (1V/4V), output current ratings (2A/2A), timing characteristics (14ns rise/fall), and package specifications (SOT-23-5). No circuit modifications are required.

Q: Are there any differences in packaging between these parts?

A: Both parts use the SC-74A, SOT-753 package footprint with SOT-23-5 supplier device packaging. They are pin-compatible and footprint-compatible for PCB assembly.

Q: What is the significance of the product status difference?

A: TPS2829DBVTG4 is discontinued at DiGi Electronics, while TPS2829DBVT carries Last Time Buy status. This means TPS2829DBVT will continue to be available for a defined period before end-of-life, providing a transition path for designs currently using the discontinued variant.

Q: Do both parts meet the same compliance standards?

A: Yes. Both TPS2829DBVTG4 and TPS2829DBVT are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: Is the non-inverting input logic the same for both parts?

A: Yes. Both parts feature non-inverting input logic with identical VIL (1V) and VIH (4V) thresholds, ensuring compatible gate drive signal interpretation in low-side MOSFET applications.