TPS2811PW Equivalent & Substitute Parts

Part Overview

The TPS2811PW is a low-side gate driver IC manufactured by Texas Instruments, designed for driving N-channel MOSFETs in synchronous configurations. This device operates with a supply voltage range of 4V to 14V and delivers peak output currents of 2A for both source and sink operations. The TPS2811PW is currently in Last Time Buy status, indicating end-of-life production. Identifying equivalent substitute parts is necessary to ensure continued design support and procurement availability for new production runs and long-term system maintenance.

Substiute Parts

TPS2811PW
Texas InstrumentsIn Stock: 2350TPS2811PW Datasheet
TPS2811PW
Current Part
TPS2811PWR
Texas InstrumentsIn Stock: 3440TPS2811PWR Datasheet
TPS2811PWR
MFR Recommended

Key Parameters

Parameter Value
Manufacturer Part Number TPS2811PW
Manufacturer Texas Instruments
Category Power Management (PMIC)
Packaging Tube
Package / Case 8-TSSOP (0.173", 4.40mm Width)
Driven Configuration Low-Side
Number of Drivers 2
Gate Type N-Channel MOSFET
Voltage - Supply 4V ~ 14V
Current - Peak Output (Source, Sink) 2A, 2A
Input Type Inverting
Rise / Fall Time (Typ) 14ns, 15ns
Operating Temperature -40°C ~ 125°C (TA)
RoHS Status ROHS3 Compliant
Moisture Sensitivity Level (MSL) 1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the TPS2811PW is determined by strict equivalence across the following critical parameters:

  • Driven Configuration: Low-Side operation only
  • Number of Drivers: Exactly 2 channels
  • Gate Type: N-Channel MOSFET driving capability
  • Voltage - Supply: 4V ~ 14V range
  • Current - Peak Output: 2A source and 2A sink capability
  • Input Type: Inverting logic
  • Package / Case: 8-TSSOP form factor
  • Rise / Fall Time: 14ns rise, 15ns fall (typical)
  • Operating Temperature Range: -40°C ~ 125°C

The TPS2811PWR qualifies as a direct substitute based on identical electrical specifications and mechanical compatibility. The primary difference is packaging format: TPS2811PW is supplied in Tube packaging, while TPS2811PWR is supplied in Tape & Reel (TR) format. Both parts share the same base product number (TPS2811) and are manufactured by Texas Instruments.

Parameter Comparison

Parameter TPS2811PW (Main Part) TPS2811PWR (Substitute)
Manufacturer Part Number TPS2811PW TPS2811PWR
Manufacturer Texas Instruments Texas Instruments
Packaging Tube Tape & Reel (TR)
Package / Case 8-TSSOP (0.173", 4.40mm Width) 8-TSSOP (0.173", 4.40mm Width)
Driven Configuration Low-Side Low-Side
Number of Drivers 2 2
Gate Type N-Channel MOSFET N-Channel MOSFET
Voltage - Supply 4V ~ 14V 4V ~ 14V
Logic Voltage - VIL, VIH 1V, 4V 1V, 4V
Current - Peak Output (Source, Sink) 2A, 2A 2A, 2A
Input Type Inverting Inverting
Rise / Fall Time (Typ) 14ns, 15ns 14ns, 15ns
Operating Temperature -40°C ~ 125°C (TA) -40°C ~ 125°C (TA)
RoHS Status ROHS3 Compliant ROHS3 Compliant
Moisture Sensitivity Level (MSL) 1 (Unlimited) 1 (Unlimited)
Product Status Last Time Buy Active

Engineering Selection Recommendations

The TPS2811PWR is the recommended substitute for the TPS2811PW. Both parts are manufactured by Texas Instruments and share identical electrical and mechanical specifications. The TPS2811PWR maintains Active product status, ensuring continued availability and manufacturing support, whereas the TPS2811PW is in Last Time Buy status.

Selection between these parts should be based on procurement requirements:

  • TPS2811PW (Tube packaging): Suitable for lower-volume applications or manual assembly processes where tube packaging is preferred.
  • TPS2811PWR (Tape & Reel packaging): Suitable for high-volume production environments utilizing automated pick-and-place assembly equipment.

Both parts carry ROHS3 compliance and MSL Level 1 rating, meeting environmental and moisture sensitivity requirements. No functional or electrical differences exist between these variants.

Frequently Asked Questions (FAQ)

Q: Can TPS2811PWR be used as a direct replacement for TPS2811PW in existing designs?

A: Yes. The TPS2811PWR is electrically and mechanically identical to the TPS2811PW. The only difference is packaging format (Tape & Reel versus Tube). No circuit modifications or design changes are required.

Q: What is the primary reason for substitution?

A: The TPS2811PW is in Last Time Buy status, indicating end-of-life production. The TPS2811PWR maintains Active status and ensures long-term availability for continued production and support.

Q: Are there any compatibility concerns with automated assembly equipment?

A: No. Both parts use the same 8-TSSOP package. The TPS2811PWR in Tape & Reel format is optimized for automated pick-and-place assembly, while the TPS2811PW in Tube format is suitable for manual or lower-volume assembly processes.

Q: Do both parts meet the same compliance standards?

A: Yes. Both TPS2811PW and TPS2811PWR are ROHS3 compliant, REACH unaffected, and carry MSL Level 1 rating. No compliance differences exist between the two variants.

Q: What are the critical electrical parameters that define substitution eligibility?

A: Substitution is determined by matching: low-side driven configuration, 2-channel driver count, N-channel MOSFET gate type, 4V to 14V supply voltage range, 2A peak output current (source and sink), inverting input logic, and -40°C to 125°C operating temperature range.

Request Quote (Ships tomorrow)