TPS22922BYFPR Equivalent & Substitute Parts

Part Overview

The TPS22922BYFPR is an active power management integrated circuit manufactured by Texas Instruments, classified as a Power Management (PMIC) device. This component functions as a power switch driver with a 1:1 input-to-output ratio, delivering high-side P-channel switching capability at 2A maximum output current. The device operates across a load voltage range of 0.9V to 3.6V and features load discharge and slew rate control functionality. With Active product status and ROHS3 compliance, the TPS22922BYFPR remains in full production. Equivalent substitute parts are identified based on identical electrical specifications, functional characteristics, and mechanical packaging compatibility, enabling flexible component sourcing while maintaining design integrity.

Substiute Parts

TPS22922BYFPR

Texas InstrumentsIn Stock: 4193TPS22922BYFPR Datasheet

Current PartRFQ

TPS22922BYZPR

Texas InstrumentsIn Stock: 54111TPS22922BYZPR Datasheet

Parametric EquivalentRFQ

TPS22922YFPR

Texas InstrumentsIn Stock: 83371TPS22922YFPR Datasheet

Parametric EquivalentRFQ

TPS22922YZPR

Texas InstrumentsIn Stock: 6139TPS22922YZPR Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TPS22922BYFPR are identified as parametric equivalents based on strict electrical and mechanical compatibility criteria. All substitute parts maintain identical specifications across the following critical parameters:

• Switch Type: General Purpose
• Number of Outputs: 1
• Ratio - Input:Output: 1:1
• Output Configuration: High Side
• Output Type: P-Channel
• Interface: On/Off
• Voltage - Load: 0.9V ~ 3.6V
• Current - Output (Max): 2A
• Rds On (Typ): 14mOhm
• Input Type: Non-Inverting
• Features: Load Discharge, Slew Rate Controlled
• Operating Temperature: -40°C ~ 85°C (TA)
• Mounting Type: Surface Mount
• Supplier Device Package: 6-DSBGA
• Package / Case: 6-XFBGA, DSBGA
• Product Status: Active
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)
• REACH Status: REACH Unaffected

The only variation among substitute parts is the packaging format (Tape & Reel versus Cut Tape & Digi-Reel), which does not affect electrical performance or functional compatibility. All parts share the same base product number TPS22922 and are manufactured by Texas Instruments.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed—TPS22922BYZPR, TPS22922YFPR, and TPS22922YZPR—are direct parametric equivalents to the TPS22922BYFPR. Selection among these parts is determined by packaging and supply chain requirements rather than electrical performance differences.

For applications requiring standard Tape & Reel packaging, the TPS22922YFPR and TPS22922YZPR are suitable alternatives. The TPS22922BYZPR accommodates applications requiring Cut Tape and Digi-Reel packaging formats.

All substitute parts maintain Active product status and full ROHS3 compliance, ensuring regulatory alignment and long-term availability. Moisture Sensitivity Level 1 (Unlimited) classification applies uniformly across all variants, eliminating moisture-related handling constraints during assembly and storage.

Frequently Asked Questions (FAQ)

Q: Can TPS22922BYZPR replace TPS22922BYFPR in production assembly?

A: Yes. The TPS22922BYZPR is a parametric equivalent with identical electrical specifications and functional characteristics. The difference is packaging format: TPS22922BYZPR uses Cut Tape & Digi-Reel packaging, while TPS22922BYFPR uses Tape & Reel. Both are compatible with standard surface mount assembly equipment. Packaging selection depends on your assembly line configuration and component feeder requirements.

Q: Are there any electrical performance differences between the substitute parts?

A: No. All substitute parts maintain identical electrical specifications: 2A maximum output current, 14mOhm typical on-resistance, 0.9V to 3.6V load voltage range, and -40°C to 85°C operating temperature. Functional behavior, switching characteristics, and load discharge features are identical across all variants.

Q: What is the significance of the packaging suffix in the part number?

A: The packaging suffix indicates the delivery format. "BYFPR" denotes Tape & Reel (TR) packaging. "BYZPR" denotes Cut Tape (CT) & Digi-Reel packaging. "YFPR" and "YZPR" also indicate Tape & Reel variants. Packaging format affects component handling, feeder compatibility, and supply chain logistics but does not affect electrical performance or PCB-level functionality.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts carry ROHS3 Compliant certification and REACH Unaffected status, meeting regulatory requirements for electronics manufacturing in restricted substance directives.

Q: What is the Moisture Sensitivity Level (MSL) for these parts?

A: All parts are classified as MSL 1 (Unlimited), indicating no moisture sensitivity constraints. These components do not require special moisture control during storage, handling, or assembly, simplifying logistics and manufacturing processes.

Q: Can I mix substitute parts within the same production batch?

A: Yes. Since all substitute parts are parametric equivalents with identical electrical and functional specifications, they can be used interchangeably within the same design. However, packaging format differences may require separate feeder configurations in automated assembly equipment.