TPS22914CYFPR Equivalent & Substitute Parts

Part Overview

The TPS22914CYFPR is an active power management integrated circuit manufactured by Texas Instruments, classified as a Power Management (PMIC) component. This device functions as a power switch driver with 1:1 input-to-output ratio configuration, delivering N-Channel high-side switching capability at 2A maximum output current. The part is in Active product status and is supplied in Tape & Reel packaging with 4-DSBGA surface mount configuration. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical compatibility, and compliance certifications to support component procurement flexibility and supply chain continuity.

Key Parameters

Parameter	Value
Manufacturer Part Number	TPS22914CYFPR
Manufacturer	Texas Instruments
Category	Power Management (PMIC)
Switch Type	General Purpose
Number of Outputs	1
Ratio - Input:Output	1:1
Output Configuration	High Side
Output Type	N-Channel
Interface	On/Off
Voltage - Load	1.05V ~ 5.5V
Current - Output (Max)	2A
Rds On (Typ)	37mOhm
Input Type	Non-Inverting
Features	Slew Rate Controlled
Operating Temperature	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount
Package / Case	4-XFBGA, DSBGA
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
REACH Status	REACH Unaffected

Substitute Part Grouping Explanation

Substitute parts for the TPS22914CYFPR are identified as parametric equivalents within the TPS22914 base product family. Substitution is determined by matching the following critical parameters:

Output Type: N-Channel
Output Configuration: High Side
Number of Outputs: 1
Ratio - Input:Output: 1:1
Voltage - Load: 1.05V ~ 5.5V
Current - Output (Max): 2A
Rds On (Typ): 37mOhm
Input Type: Non-Inverting
Features: Slew Rate Controlled
Operating Temperature: -40°C ~ 85°C (TA)
Mounting Type: Surface Mount
Package / Case: 4-XFBGA, DSBGA
RoHS Status: ROHS3 Compliant
Moisture Sensitivity Level (MSL): 1 (Unlimited)

Substitute parts differ only in packaging format (Tape & Reel versus Cut Tape & Digi-Reel) and inventory availability. All electrical and thermal specifications remain identical.

Parameter Comparison

Parameter	TPS22914CYFPR	TPS22914BYFPR	TPS22914BYFPT	TPS22914CYFPT
Manufacturer	Texas Instruments	Texas Instruments	Texas Instruments	Texas Instruments
Category	Power Management (PMIC)	Power Management (PMIC)	Power Management (PMIC)	Power Management (PMIC)
Packaging	Tape & Reel (TR)	Tape & Reel (TR)	Cut Tape (CT) & Digi-Reel®	Tape & Reel (TR)
Switch Type	General Purpose	General Purpose	General Purpose	General Purpose
Number of Outputs	1	1	1	1
Ratio - Input:Output	1:1	1:1	1:1	1:1
Output Configuration	High Side	High Side	High Side	High Side
Output Type	N-Channel	N-Channel	N-Channel	N-Channel
Interface	On/Off	On/Off	On/Off	On/Off
Voltage - Load	1.05V ~ 5.5V	1.05V ~ 5.5V	1.05V ~ 5.5V	1.05V ~ 5.5V
Current - Output (Max)	2A	2A	2A	2A
Rds On (Typ)	37mOhm	37mOhm	37mOhm	37mOhm
Input Type	Non-Inverting	Non-Inverting	Non-Inverting	Non-Inverting
Features	Slew Rate Controlled	Slew Rate Controlled	Slew Rate Controlled	Slew Rate Controlled
Operating Temperature	-40°C ~ 85°C (TA)	-40°C ~ 85°C (TA)	-40°C ~ 85°C (TA)	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Package / Case	4-XFBGA, DSBGA	4-XFBGA, DSBGA	4-XFBGA, DSBGA	4-XFBGA, DSBGA
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
REACH Status	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected
Product Status	Active	Active	Active	Active

Engineering Selection Recommendations

All substitute parts listed maintain Active product status with Texas Instruments and comply with ROHS3 and REACH requirements. Selection between TPS22914CYFPR and its substitutes is determined by packaging requirements and supply availability:

TPS22914CYFPR and TPS22914CYFPT are supplied in Tape & Reel format, suitable for high-volume automated assembly operations. TPS22914BYFPR is also Tape & Reel packaged. TPS22914BYFPT is supplied in Cut Tape & Digi-Reel format, appropriate for lower-volume or mixed-component procurement scenarios.

All parts share identical electrical performance, thermal characteristics, and compliance certifications. Component selection should be based on procurement volume requirements, assembly equipment compatibility, and inventory availability.

Frequently Asked Questions (FAQ)

Q: Can TPS22914BYFPR be used as a direct replacement for TPS22914CYFPR?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, thermal ratings, and compliance certifications. The difference is packaging format: TPS22914CYFPR is Tape & Reel, while TPS22914BYFPR is also Tape & Reel. Both are suitable for automated assembly.

Q: What is the difference between Tape & Reel and Cut Tape & Digi-Reel packaging?

A: Tape & Reel packaging supplies components on continuous carrier tape wound on reels, optimized for high-speed automated pick-and-place assembly. Cut Tape & Digi-Reel packaging provides components on cut tape segments, suitable for lower-volume orders or manual assembly processes. Electrical and mechanical specifications are identical.

Q: Are all substitute parts compatible with the same PCB footprint?

A: Yes. All substitute parts use the 4-XFBGA, DSBGA package configuration with identical mechanical dimensions and pin assignments. PCB footprints are interchangeable.

Q: Do substitute parts have the same moisture sensitivity requirements?

A: Yes. All parts have Moisture Sensitivity Level (MSL) 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Can I mix different substitute parts in the same production run?

A: Yes. All substitute parts are parametric equivalents with identical electrical performance and thermal characteristics. They can be used interchangeably within the same design without functional impact.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message