TPS22913BYZVT Equivalent & Substitute Parts

Part Overview

The TPS22913BYZVT is an active power switch IC manufactured by Texas Instruments, classified as a Power Management (PMIC) component. This device functions as a P-Channel high-side power switch with 1:1 input-to-output ratio, rated for 2A maximum output current and 1.4V to 5.5V load voltage operation. The part is in Active product status with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1). Alternative equivalent parts are necessary when Cut Tape packaging is unavailable or when different thermal/electrical performance characteristics are required for specific application requirements.

Substiute Parts

TPS22913BYZVT

Texas InstrumentsIn Stock: 1274TPS22913BYZVT Datasheet

Current PartRFQ

TPS22913BYZVR

Texas InstrumentsIn Stock: 35465TPS22913BYZVR Datasheet

Parametric EquivalentRFQ

TPS22913CYZVR

Texas InstrumentsIn Stock: 32229TPS22913CYZVR Datasheet

Parametric EquivalentRFQ

TPS22913CYZVT

Texas InstrumentsIn Stock: 1810TPS22913CYZVT Datasheet

Parametric EquivalentRFQ

FPF1504BUCX

onsemiIn Stock: 23353FPF1504BUCX Datasheet

MFR RecommendedRFQ

FPF1504LUCX

onsemiIn Stock: 4093FPF1504LUCX Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic for the TPS22913BYZVT is based on the following critical parameters that must remain constant across equivalent parts:

Mandatory Matching Parameters:

• Switch Type: General Purpose P-Channel
• Output Configuration: High Side, 1:1 Ratio
• Current - Output (Max): 2A
• Voltage - Load: 1.4V ~ 5.5V
• Rds On (Typ): 60mOhm
• Operating Temperature: -40°C ~ 85°C (TA)
• Package Type: 4-DSBGA (0.88x0.88)
• Interface: On/Off
• Input Type: Non-Inverting
• Features: Load Discharge, Slew Rate Controlled
• Fault Protection: Reverse Current, UVLO
• RoHS Status: ROHS3 Compliant

Variable Parameters (Allowed to Differ):

• Packaging format (Cut Tape vs. Tape & Reel)
• Inventory availability

Substitute parts are grouped into two categories: Parametric Equivalents (identical electrical and mechanical specifications with packaging variations) and Manufacturer Recommended alternatives (different electrical performance within acceptable application ranges).

Parameter Comparison

Engineering Selection Recommendations

Parametric Equivalents (TPS22913 Series - Texas Instruments):

TPS22913BYZVR, TPS22913CYZVR, and TPS22913CYZVT are direct parametric equivalents to TPS22913BYZVT. These parts maintain identical electrical specifications (2A output current, 60mOhm Rds On, 1.4V-5.5V load voltage range) and mechanical package dimensions (4-DSBGA 0.88x0.88). Selection among these variants is determined by packaging format availability: Cut Tape (CT) & Digi-Reel® for TPS22913BYZVT and TPS22913CYZVR, or Tape & Reel (TR) for TPS22913BYZVR and TPS22913CYZVT. All variants are Active status products with ROHS3 compliance and unlimited MSL rating.

Manufacturer Recommended Alternatives (FPF1504 Series - onsemi):

FPF1504BUCX and FPF1504LUCX are manufacturer-recommended substitutes with different electrical performance characteristics. These onsemi IntelliMAX™ series devices operate at reduced maximum output current (1.5A versus 2A) and narrower load voltage range (1V-3.6V versus 1.4V-5.5V). However, they provide superior on-resistance performance (15mOhm versus 60mOhm). Package dimensions differ (4-WLCSP 0.96x0.96 versus 4-DSBGA 0.88x0.88), requiring PCB layout modification. These alternatives are suitable only for applications where load current does not exceed 1.5A and supply voltage remains within 1V-3.6V range. Both variants are Active status with ROHS3 compliance.

Frequently Asked Questions (FAQ)

Q: Can TPS22913BYZVR be used as a direct replacement for TPS22913BYZVT?

A: TPS22913BYZVR is a parametric equivalent with identical electrical and mechanical specifications. The only difference is packaging format: TPS22913BYZVR is supplied in Tape & Reel (TR) format while TPS22913BYZVT is supplied in Cut Tape (CT) & Digi-Reel® format. Direct substitution is possible if your assembly process accommodates Tape & Reel packaging.

Q: What are the key differences between TPS22913 and FPF1504 series?

A: The primary differences are maximum output current (2A for TPS22913 versus 1.5A for FPF1504), load voltage range (1.4V-5.5V for TPS22913 versus 1V-3.6V for FPF1504), and on-resistance (60mOhm for TPS22913 versus 15mOhm for FPF1504). Package dimensions also differ: 4-DSBGA (0.88x0.88) for TPS22913 versus 4-WLCSP (0.96x0.96) for FPF1504. FPF1504 substitution requires application verification that load current remains below 1.5A and supply voltage stays within 1V-3.6V.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts—TPS22913BYZVR, TPS22913CYZVR, TPS22913CYZVT, FPF1504BUCX, and FPF1504LUCX—are ROHS3 compliant with unlimited moisture sensitivity level (MSL 1).

Q: What packaging options are available for TPS22913 equivalents?

A: TPS22913 equivalents are available in two packaging formats: Cut Tape (CT) & Digi-Reel® (TPS22913BYZVT, TPS22913CYZVR) and Tape & Reel (TR) (TPS22913BYZVR, TPS22913CYZVT). Selection depends on your assembly equipment and procurement requirements.

Q: Can FPF1504 series be used in applications requiring 2A output current?

A: No. FPF1504 series devices are rated for maximum 1.5A output current. Applications requiring 2A output current must use TPS22913 series equivalents to ensure reliable operation within device specifications.

Q: Do FPF1504 devices provide the same fault protection as TPS22913?

A: No. TPS22913 series includes Reverse Current and UVLO (Under-Voltage Lock-Out) fault protection. FPF1504 series fault protection specifications are not provided in the available data. Verify fault protection requirements for your application before selecting FPF1504 as a substitute.