TPS2056AD Equivalent & Substitute Parts

Part Overview

The TPS2056AD is a Power Management IC (PMIC) manufactured by Texas Instruments, functioning as a power switch driver with 1:2 input-to-output ratio and N-Channel output configuration. This component is classified as "Not For New Designs," indicating it has reached end-of-life status. The device provides 250mA maximum output current across two channels with 80mOhm typical on-resistance, housed in an 8-SOIC surface mount package. Finding equivalent or substitute parts is necessary due to the product's discontinued status and limited availability for new production designs.

Key Parameters

Parameter	TPS2056AD Value
Manufacturer	Texas Instruments
Category	Power Management (PMIC)
Switch Type	General Purpose
Number of Outputs	2
Ratio - Input:Output	1:2
Output Type	N-Channel
Output Configuration	High Side
Voltage - Load	2.7V ~ 5.5V
Current - Output (Max)	250mA
Rds On (Typ)	80mOhm
Input Type	Non-Inverting
Fault Protection	Current Limiting (Fixed), Over Temperature, UVLO
Operating Temperature	0°C ~ 85°C (TA)
Package / Case	8-SOIC (0.154", 3.90mm Width)
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution for the TPS2056AD is determined by the following critical parameters:

Output Configuration: High Side switching topology
Number of Outputs: 2 channels
Ratio - Input:Output: 1:2 configuration
Output Type: N-Channel or P-Channel capability
Voltage Range: 2.7V ~ 5.5V load voltage compatibility
Current Capacity: Minimum 250mA per output
Package Type: 8-SOIC or equivalent footprint
Fault Protection: Current Limiting, Over Temperature, UVLO

Substitute parts are grouped into three categories:

Direct Manufacturer Equivalents (Texas Instruments): Same base functionality with packaging or temperature range variations
Parametric Equivalents (Texas Instruments): Alternative configurations with different output ratios or channel counts
Manufacturer Recommended Alternatives (Diodes Incorporated, Rohm Semiconductor): Cross-manufacturer solutions with enhanced current capacity or additional features

Parameter Comparison

Part Number	Manufacturer	Output Type	Number of Outputs	Ratio	Current (Max)	Rds On (Typ)	Operating Temp	Product Status
TPS2056AD	Texas Instruments	N-Channel	2	1:2	250mA	80mOhm	0°C ~ 85°C	Not For New Designs
TPS2056D	Texas Instruments	N-Channel	2	1:2	250mA	80mOhm	-40°C ~ 85°C	Discontinued at DiGi Electronics
TPS2045AD	Texas Instruments	N-Channel	1	1:1	250mA	80mOhm	0°C ~ 85°C	Active
TPS2055AD	Texas Instruments	N-Channel	1	1:1	250mA	80mOhm	0°C ~ 85°C	Active
TPS2046AD	Texas Instruments	N-Channel	2	1:1	250mA	80mOhm	0°C ~ 85°C	Active
TPS2090D	Texas Instruments	N-Channel	2	1:1	250mA	80mOhm	0°C ~ 125°C	Active
TPS2092D	Texas Instruments	N-Channel	2	1:1	250mA	80mOhm	0°C ~ 125°C	Active
AP2152SG-13	Diodes Incorporated	P-Channel	2	1:2	500mA	120mOhm	-40°C ~ 85°C	Active
AP2192SG-13	Diodes Incorporated	P-Channel	2	1:2	1.5A	120mOhm	-40°C ~ 85°C	Active
BD2066FJ-LBE2	Rohm Semiconductor	N-Channel	2	1:2	1.5A	80mOhm	-40°C ~ 85°C	Active

Engineering Selection Recommendations

For Direct Replacement (Same Functionality):

TPS2056D is the closest direct equivalent, maintaining identical electrical specifications (N-Channel, 1:2 ratio, 250mA, 80mOhm) with extended operating temperature range (-40°C ~ 85°C versus 0°C ~ 85°C). However, this part is also discontinued at DiGi Electronics, limiting long-term availability.

For Active Production Designs:

BD2066FJ-LBE2 (Rohm Semiconductor) provides the most compatible active alternative, preserving the N-Channel output type, 1:2 ratio, and 8-SOIC package footprint while offering superior current capacity (1.5A versus 250mA) and extended temperature range (-40°C ~ 85°C). This part maintains 80mOhm on-resistance and includes additional features (Slew Rate Controlled, Status Flag, Reverse Current protection).

For Current-Limited Applications:

AP2192SG-13 (Diodes Incorporated) offers active availability with 1.5A output current and 1:2 ratio configuration. The primary design consideration is the P-Channel output type versus the original N-Channel specification. This part includes Status Flag and Reverse Current protection features, with ROHS3 compliance and MSL 1 rating matching the original device.

For Single-Output Requirements:

TPS2045AD, TPS2055AD, TPS2090D, and TPS2092D are active Texas Instruments alternatives with 1:1 output ratios and 250mA capacity. TPS2090D and TPS2092D extend operating temperature to 0°C ~ 125°C and include Status Flag functionality.

All recommended substitutes maintain ROHS3 compliance, MSL 1 rating, and equivalent fault protection features (Current Limiting, Over Temperature, UVLO).

Frequently Asked Questions (FAQ)

Q: Can TPS2056D be used as a direct replacement for TPS2056AD?

A: TPS2056D maintains identical electrical specifications and package type. The primary difference is extended operating temperature range (-40°C ~ 85°C versus 0°C ~ 85°C). However, this part is also discontinued at DiGi Electronics, making it unsuitable for new production designs requiring long-term availability.

Q: What is the key difference between N-Channel and P-Channel output types in these power switches?

A: N-Channel devices (TPS2056AD, BD2066FJ-LBE2) and P-Channel devices (AP2152SG-13, AP2192SG-13) differ in switching topology and control logic. Selection depends on circuit design requirements and control signal polarity. Both types provide high-side switching configuration as specified for this product category.

Q: Why does BD2066FJ-LBE2 have higher current capacity (1.5A) than the original TPS2056AD (250mA)?

A: BD2066FJ-LBE2 is designed for USB Switch applications with enhanced current handling. The increased capacity does not prevent use in lower-current applications; the device will operate within the TPS2056AD's 250mA specification without performance degradation.

Q: Are the 8-SOIC and 8-SOP packages pin-compatible?

A: Both packages are 8-pin surface mount configurations with 0.154" (3.90mm) width. Physical footprint compatibility requires verification against specific PCB layout and manufacturer datasheets. Pin assignment and functional mapping must be confirmed before board-level substitution.

Q: What does the 1:2 ratio mean in the context of these power switches?

A: The 1:2 input-to-output ratio indicates one control input signal drives two independent output channels. This configuration allows single-input control of dual power switching functions.

Q: Can TPS2045AD or TPS2055AD be used if only one output channel is required?

A: Yes. TPS2045AD and TPS2055AD provide 1:1 ratio configurations with single output channels. These are active Texas Instruments products suitable for applications requiring only one switched output while maintaining identical voltage range, current capacity, and fault protection features.

Q: What is the significance of "Not For New Designs" status?

A: This designation indicates the TPS2056AD has reached end-of-life and is no longer recommended for new product development. Existing inventory may be available, but long-term supply cannot be guaranteed. New designs should select from active-status alternatives.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message