TPCL475J010R5000 Equivalent & Substitute Parts

Part Overview

The TPCL475J010R5000 is a 4.7 µF molded tantalum capacitor rated at 10 V, manufactured by KYOCERA AVX in the 0603 (1608 Metric) surface mount package. This component belongs to the TACmicrochip® TPC series and is classified as Active product status. Tantalum capacitors of this specification are essential in applications requiring compact form factors, stable capacitance over temperature ranges, and low equivalent series resistance. Identifying equivalent and substitute parts becomes necessary when managing inventory constraints, lead time optimization, or when specific packaging configurations are unavailable.

Substiute Parts

TPCL475J010R5000

KYOCERA AVXIn Stock: 1074TPCL475J010R5000 Datasheet

Current PartRFQ

TPCL475K010R5000

KYOCERA AVXIn Stock: 15917TPCL475K010R5000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TPCL475J010R5000 is determined by strict equivalence in the following critical parameters:

• Capacitance Value: Must remain 4.7 µF
• Voltage Rating: Must be 10 V or higher
• Package / Case: Must be 0603 (1608 Metric) surface mount
• ESR Specification: Must not exceed 5 Ohm @ 100kHz
• Operating Temperature Range: Must support -55°C to 125°C
• Mounting Type: Must be Surface Mount

The TPCL475K010R5000 qualifies as a direct substitute based on these parameters. The primary difference is the tolerance specification, which changes from ±5% to ±10%. This tolerance variance does not affect the substitution validity when the application circuit design accommodates the wider tolerance band.

Parameter Comparison

Engineering Selection Recommendations

Both the TPCL475J010R5000 and TPCL475K010R5000 maintain Active product status from KYOCERA AVX, ensuring continued manufacturing support and supply chain stability. Both components are ROHS3 Compliant and REACH Unaffected, meeting current environmental and regulatory requirements for industrial and commercial applications.

The selection between these parts should be based on circuit tolerance requirements. The TPCL475J010R5000 with ±5% tolerance is suitable for applications requiring tighter capacitance accuracy. The TPCL475K010R5000 with ±10% tolerance is appropriate for applications where wider tolerance bands are acceptable within the circuit design specifications.

Both parts share identical electrical performance characteristics, physical dimensions, and thermal specifications, making them functionally interchangeable when tolerance requirements are satisfied.

Frequently Asked Questions (FAQ)

Q: Can TPCL475K010R5000 replace TPCL475J010R5000 in all applications?

A: Substitution is valid when the circuit design accommodates the ±10% tolerance specification of the TPCL475K010R5000. Applications requiring strict ±5% tolerance must use the TPCL475J010R5000.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both parts use the 0603 (1608 Metric) package with identical dimensions of 0.063" L x 0.033" W (1.60mm x 0.85mm) and maximum seated height of 0.039" (1.00mm).

Q: What is the difference in packaging between these parts?

A: The TPCL475J010R5000 is available in standard packaging, while the TPCL475K010R5000 is supplied in Tape & Reel (TR) format. Both are surface mount compatible.

Q: Do both parts meet the same environmental and compliance standards?

A: Yes. Both parts are ROHS3 Compliant, REACH Unaffected, and classified as Moisture Sensitivity Level 1 (Unlimited), meeting identical regulatory requirements.

Q: Are the electrical performance characteristics the same?

A: Yes. Both parts have identical capacitance (4.7 µF), voltage rating (10 V), ESR (5 Ohm @ 100kHz), operating temperature range (-55°C to 125°C), and lifetime specification (2000 Hrs @ 85°C).