TPCL335M010R5000 Equivalent & Substitute Parts

Part Overview

The TPCL335M010R5000 is a 3.3 µF molded tantalum capacitor rated at 10 V with ±20% tolerance, designed for surface mount applications in the 0603 (1608 Metric) package. This component is part of the TACmicrochip® TPC series from KYOCERA AVX and maintains Active product status. Equivalent and substitute parts are identified when electrical and mechanical parameters align within acceptable tolerances for the application, enabling procurement flexibility and supply chain continuity.

Substiute Parts

TPCL335M010R5000

KYOCERA AVXIn Stock: 1119TPCL335M010R5000 Datasheet

Current PartRFQ

TPCL335K010R5000

KYOCERA AVXIn Stock: 2042TPCL335K010R5000 Datasheet

UpgradeRFQ

TACL335M010XTA

KYOCERA AVXIn Stock: 4639TACL335M010XTA Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the TPCL335M010R5000 is determined by strict equivalence in the following parameters:

• Capacitance: 3.3 µF (exact match required)
• Voltage Rating: 10 V (exact match required)
• Package: 0603 (1608 Metric) (exact match required)
• Mounting Type: Surface Mount (exact match required)
• Type: Molded Tantalum (exact match required)

Tolerance variations (±20% to ±10%) and ESR differences (5 Ohm to 7.5 Ohm) are permissible within the electrical design margins of typical applications. All substitute parts maintain identical operating temperature ranges, RoHS3 compliance, and MSL ratings.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain Active product status and full ROHS3 compliance with MSL 1 rating, ensuring long-term availability and environmental regulatory adherence. The TPCL335K010R5000 offers improved tolerance specification (±10% versus ±20%), making it suitable for applications requiring tighter capacitance control while maintaining identical ESR and thermal characteristics. The TACL335M010XTA, from the TAC series, provides an alternative with slightly elevated ESR (7.5 Ohm) but maintains full electrical and mechanical compatibility. Selection between these parts depends on tolerance requirements and series preference within the KYOCERA AVX tantalum capacitor portfolio.

Frequently Asked Questions (FAQ)

Q: Can TPCL335K010R5000 replace TPCL335M010R5000 directly?

A: Yes. Both parts share identical capacitance (3.3 µF), voltage rating (10 V), package (0603), ESR (5 Ohm @ 100kHz), and thermal specifications. The TPCL335K010R5000 features tighter tolerance (±10% versus ±20%), making it a direct upgrade for applications requiring improved capacitance accuracy.

Q: What is the difference between TPCL335M010R5000 and TACL335M010XTA?

A: Both parts are 3.3 µF, 10 V, 0603 molded tantalum capacitors with ±20% tolerance. The primary difference is ESR: TPCL335M010R5000 has 5 Ohm @ 100kHz, while TACL335M010XTA has 7.5 Ohm. Both are mechanically and electrically compatible for standard applications.

Q: Are all three parts pin-compatible?

A: Yes. All three parts use the 0603 (1608 Metric) surface mount package with identical footprint dimensions (0.063" L x 0.033" W, 1.60mm x 0.85mm) and maximum seated height (0.039", 1.00mm).

Q: Do these parts require different handling or storage procedures?

A: No. All three parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions. Storage and handling procedures are identical across all three parts.

Q: Which part should be selected for new designs?

A: Selection depends on tolerance and ESR requirements. For general-purpose applications, TPCL335M010R5000 is suitable. For applications requiring tighter capacitance tolerance, TPCL335K010R5000 is preferred. TACL335M010XTA serves as an alternative when TPC series availability is limited.