TPCL335K010R5000 Equivalent & Substitute Parts

Part Overview

The TPCL335K010R5000 is a 3.3 µF molded tantalum capacitor rated at 10 V, manufactured by KYOCERA AVX in the 0603 (1608 Metric) surface mount package. This component is part of the TACmicrochip® TPC series and maintains Active product status. Tantalum capacitors of this specification are essential in applications requiring compact form factors with stable capacitance across temperature ranges. Substitute parts may be required due to inventory constraints, supply chain considerations, or specific performance requirements within acceptable electrical parameters.

Substiute Parts

TPCL335K010R5000

KYOCERA AVXIn Stock: 2042TPCL335K010R5000 Datasheet

Current PartRFQ

TACL335K010XTA

KYOCERA AVXIn Stock: 4257TACL335K010XTA Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TPCL335K010R5000 is determined by strict adherence to the following parameters:

• Capacitance Value: Must be 3.3 µF
• Tolerance: Must be ±10%
• Rated Voltage: Must be 10 V or higher
• Package / Case: Must be 0603 (1608 Metric)
• Mounting Type: Must be Surface Mount
• Type: Must be Molded Tantalum
• Operating Temperature Range: Must support -55°C ~ 125°C
• Compliance: Must maintain ROHS3 compliance and MSL 1 rating

The TACL335K010XTA qualifies as a direct substitute based on matching all critical electrical and mechanical parameters within these constraints.

Parameter Comparison

Engineering Selection Recommendations

Both the TPCL335K010R5000 and TACL335K010XTA are Active products manufactured by KYOCERA AVX with identical electrical ratings and mechanical specifications. Both components maintain ROHS3 compliance and MSL 1 moisture sensitivity classification, ensuring compatibility with standard manufacturing and storage protocols.

The primary distinction between these parts is the ESR specification: the TPCL335K010R5000 specifies 5 Ohm @ 100kHz, while the TACL335K010XTA specifies 7.5 Ohm. This difference falls within acceptable operational parameters for general-purpose tantalum capacitor applications. Selection between these parts should be based on circuit-specific ESR requirements and inventory availability.

Frequently Asked Questions (FAQ)

Q: Can TACL335K010XTA be used as a direct replacement for TPCL335K010R5000?

A: Yes. Both parts share identical capacitance (3.3 µF), voltage rating (10 V), tolerance (±10%), package (0603), and operating temperature range (-55°C ~ 125°C). The ESR difference (5 Ohm vs. 7.5 Ohm) does not prevent substitution in general-purpose applications.

Q: Are there any package or mounting differences between these parts?

A: No. Both components use the 0603 (1608 Metric) surface mount package with identical physical dimensions (0.063" L x 0.033" W, 1.60mm x 0.85mm) and maximum seated height (0.039" / 1.00mm).

Q: Do both parts meet the same compliance standards?

A: Yes. Both TPCL335K010R5000 and TACL335K010XTA are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, REACH Unaffected status, and EAR99 ECCN classification.

Q: What is the significance of the ESR difference?

A: ESR (Equivalent Series Resistance) affects impedance characteristics at specific frequencies. The TPCL335K010R5000 at 5 Ohm @ 100kHz provides lower impedance than the TACL335K010XTA at 7.5 Ohm. Circuit designs with strict ESR requirements should specify the appropriate part number.

Q: Are both parts available in the same packaging format?

A: Yes. Both components are supplied in Tape & Reel (TR) packaging suitable for automated assembly processes.