TPCL225K006R5000 Equivalent & Substitute Parts

Part Overview

The TPCL225K006R5000 is a 2.2 µF molded tantalum capacitor manufactured by KYOCERA AVX, rated for 6.3 V operation in a 0603 (1608 Metric) surface mount package. This component is part of the TACmicrochip® TPC series and maintains Active product status. Substitute parts are identified to address application requirements where higher voltage ratings or alternative packaging configurations are necessary while maintaining core electrical and mechanical compatibility.

Substiute Parts

TPCL225K006R5000

KYOCERA AVXIn Stock: 3183TPCL225K006R5000 Datasheet

Current PartRFQ

TPCL225K010R5000

KYOCERA AVXIn Stock: 3880TPCL225K010R5000 Datasheet

UpgradeRFQ

TPCL225K016R5000

KYOCERA AVXIn Stock: 82157TPCL225K016R5000 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TPCL225K006R5000 are qualified based on the following criteria:

Maintained Parameters (Must Match):

• Capacitance: 2.2 µF
• Tolerance: ±10%
• Type: Molded tantalum
• ESR: 5 Ohm @ 100 kHz
• Operating Temperature: -55°C ~ 125°C
• Lifetime @ Temperature: 2000 Hrs @ 85°C
• Package / Case: 0603 (1608 Metric)
• Physical Dimensions: 0.063" L x 0.033" W (1.60 mm x 0.85 mm)
• Height - Seated (Max): 0.039" (1.00 mm)
• Mounting Type: Surface Mount
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Variable Parameter (Allows Substitution):

• Voltage - Rated: Higher voltage ratings (10 V, 16 V) are acceptable substitutes for 6.3 V applications, provided circuit design accommodates the physical form factor and electrical characteristics.

Parameter Comparison

Engineering Selection Recommendations

All three parts—TPCL225K006R5000, TPCL225K010R5000, and TPCL225K016R5000—maintain Active product status and ROHS3 compliance. The TPCL225K010R5000 and TPCL225K016R5000 are direct substitutes for the main part number, with the primary distinction being rated voltage. Selection between these parts depends on the maximum voltage present in the application circuit. The TPCL225K016R5000 offers the highest voltage margin and is available in greater inventory quantity (82,100 pcs) compared to the main part (3,078 pcs) and the 10 V variant (3,869 pcs). Packaging format differs for the 16 V variant, supplied as Cut Tape (CT) & Digi-Reel® rather than standard Tape & Reel (TR).

Frequently Asked Questions (FAQ)

Q: Can TPCL225K010R5000 or TPCL225K016R5000 be used in place of TPCL225K006R5000?

A: Yes. Both substitute parts maintain identical capacitance (2.2 µF), tolerance (±10%), ESR (5 Ohm @ 100 kHz), operating temperature range (-55°C ~ 125°C), and physical dimensions (0603 package, 1.60 mm x 0.85 mm). The higher voltage ratings (10 V and 16 V respectively) are compatible with 6.3 V circuit applications.

Q: What is the primary difference between the substitute parts?

A: The TPCL225K010R5000 is rated for 10 V, while the TPCL225K016R5000 is rated for 16 V. Both maintain all other electrical and mechanical specifications identical to the main part. Packaging differs: TPCL225K010R5000 is supplied as Tape & Reel (TR), while TPCL225K016R5000 is supplied as Cut Tape (CT) & Digi-Reel®.

Q: Are there any physical compatibility concerns when substituting these parts?

A: No. All three parts share identical package designation (0603 / 1608 Metric), dimensions (0.063" L x 0.033" W), and maximum seated height (0.039"). They are directly interchangeable from a PCB layout and assembly perspective.

Q: Do all parts meet the same compliance standards?

A: Yes. All three parts are ROHS3 compliant, REACH unaffected, and classified as EAR99 for export control purposes. Moisture Sensitivity Level is 1 (Unlimited) for all variants.

Q: Which part should be selected for maximum design margin?

A: The TPCL225K016R5000 provides the highest voltage rating (16 V) and is available in the largest inventory quantity (82,100 pcs). This part is suitable for applications requiring maximum voltage headroom within the 0603 molded tantalum capacitor form factor.