TPCL106M010R5000 Equivalent & Substitute Parts

Part Overview

The TPCL106M010R5000 is a 10 µF molded tantalum capacitor rated at 10 V in 0603 (1608 Metric) surface mount package, manufactured by KYOCERA AVX. This component is classified as Active product status and is designed for general purpose applications requiring compact form factor and reliable performance across industrial temperature ranges. Substitute parts become necessary when the primary part experiences supply constraints, extended lead times, or when design requirements permit alternative manufacturers meeting identical electrical and mechanical specifications.

Substiute Parts

TPCL106M010R5000

KYOCERA AVXIn Stock: 1025TPCL106M010R5000 Datasheet

Current PartRFQ

TACL106M010RTA

KYOCERA AVXIn Stock: 53273TACL106M010RTA Datasheet

MFR RecommendedRFQ

298D106X0010M2T

Vishay SpragueIn Stock: 5281298D106X0010M2T Datasheet

MFR RecommendedRFQ

TR8M106M010C2000

Vishay SpragueIn Stock: 224004TR8M106M010C2000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TPCL106M010R5000 is determined by strict equivalence across the following parameters: capacitance value (10 µF), tolerance (±20%), rated voltage (10 V), package type (0603/1608 Metric), mounting method (Surface Mount), operating temperature range (-55°C ~ 125°C), and compliance certifications (ROHS3, REACH Unaffected, EAR99). All three substitute parts meet these core requirements. Variations in ESR (Equivalent Series Resistance) and height dimensions are permitted within the specified package constraints and do not affect functional interchangeability for general purpose applications. Packaging format differences (Tape & Reel versus Cut Tape) represent logistical variations only and do not impact electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts maintain Active product status and full compliance with ROHS3, REACH, and EAR99 classifications, ensuring regulatory equivalence with the primary TPCL106M010R5000 part. TACL106M010RTA (KYOCERA AVX) provides direct manufacturer continuity within the same product family. 298D106X0010M2T and TR8M106M010C2000 (both Vishay Sprague) represent cross-manufacturer alternatives with identical electrical ratings and superior inventory availability. TR8M106M010C2000 offers the lowest ESR specification (2 Ohm) and highest stock levels (223,980 units), making it suitable for applications where reduced impedance is beneficial. 298D106X0010M2T provides intermediate ESR performance (7.5 Ohm) with moderate inventory (5,178 units). Selection should be based on supply chain requirements, packaging format preferences, and application-specific ESR tolerances.

Frequently Asked Questions (FAQ)

Q: Can TACL106M010RTA be used as a direct replacement for TPCL106M010R5000? A: Yes. Both parts are manufactured by KYOCERA AVX, share identical capacitance (10 µF), voltage rating (10 V), tolerance (±20%), package (0603), and operating temperature range (-55°C ~ 125°C). The primary difference is packaging format (Tape & Reel versus standard packaging) and ESR specification (7.5 Ohm versus 5 Ohm), neither of which affects functional interchangeability in general purpose applications.

Q: What is the significance of ESR differences between substitute parts? A: ESR (Equivalent Series Resistance) affects impedance characteristics at operating frequencies. TPCL106M010R5000 specifies 5 Ohm @ 100kHz, while substitutes range from 2 Ohm (TR8M106M010C2000) to 7.5 Ohm (TACL106M010RTA and 298D106X0010M2T). Lower ESR reduces heat generation and improves high-frequency performance. Applications with strict ESR requirements should verify compatibility before substitution.

Q: Are the Vishay Sprague parts (298D106X0010M2T and TR8M106M010C2000) compatible with the original KYOCERA AVX part? A: Yes. Both Vishay Sprague parts meet all core electrical and mechanical specifications: 10 µF capacitance, ±20% tolerance, 10 V rating, 0603 package, -55°C ~ 125°C operating range, and ROHS3 compliance. Cross-manufacturer substitution is valid when these parameters align.

Q: Does package height variation affect PCB assembly? A: TPCL106M010R5000 and TACL106M010RTA specify maximum seated height of 0.039" (1.00mm), while 298D106X0010M2T and TR8M106M010C2000 specify 0.035" (0.89mm). The 0.04" difference is within typical PCB assembly tolerances and does not affect placement or soldering processes for standard surface mount equipment.

Q: What packaging formats are available for these substitute parts? A: TACL106M010RTA is supplied in Tape & Reel (TR) format. 298D106X0010M2T is supplied in Tape & Reel (TR) format. TR8M106M010C2000 is supplied in Cut Tape (CT) & Digi-Reel® format. Packaging selection depends on production volume and assembly line requirements.