TP11SH9AVKE Equivalent & Substitute Parts

Part Overview

The TP11SH9AVKE is a pushbutton switch manufactured by C&K, classified as SPST-NO (Single Pole Single Throw - Normally Open) with a 0.4VA rating at 20V. This through-hole, right-angle vertical mounted switch features a round plunger actuator with black cap and sealed design. The part is currently obsolete, making identification of equivalent and substitute components necessary for ongoing design support, maintenance, and production continuity.

Substiute Parts

TP11SH9AVKE

C&KIn Stock: 985TP11SH9AVKE Datasheet

Current PartRFQ

TP11SH9AVPE

C&KIn Stock: 1024TP11SH9AVPE Datasheet

DirectRFQ

800SP9B6M7RE

E-SwitchIn Stock: 875800SP9B6M7RE Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TP11SH9AVKE are identified based on strict electrical and mechanical parameter matching. The following criteria determine substitutability:

Critical Matching Parameters:

• Circuit configuration: SPST-NO
• Current rating: 0.4VA (AC/DC)
• Voltage rating: 20V AC and 20V DC
• Mounting type: Through Hole, Right Angle, Vertical
• Actuator type: Round, Plunger
• Termination style: PC Pin
• Operating temperature range: -30°C to 85°C

Substitute parts are grouped into two categories: direct manufacturer equivalents from C&K and cross-manufacturer alternatives that meet all electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

TP11SH9AVPE (C&K Direct Equivalent): This part is the primary substitute for the obsolete TP11SH9AVKE. It maintains identical electrical specifications, mounting configuration, and actuator characteristics. The TP11SH9AVPE carries Active product status and is RoHS Compliant, providing long-term availability and regulatory compliance. This part is recommended as the first choice for direct replacement.

800SP9B6M7RE (E-Switch Cross-Manufacturer Alternative): This part meets all critical electrical and mechanical parameters and is suitable where C&K parts are unavailable. The 800SP9B6M7RE is Active status and ROHS3 Compliant. The electrical life specification is 50,000 cycles compared to 60,000 cycles for the main part; this difference should be evaluated against application duty cycle requirements.

Frequently Asked Questions (FAQ)

Q: Can TP11SH9AVPE be used as a direct replacement for TP11SH9AVKE? A: Yes. Both parts share identical electrical ratings (0.4VA at 20V), circuit configuration (SPST-NO), mounting type (through-hole right-angle vertical), actuator design (round plunger, black), and operating temperature range (-30°C to 85°C). The TP11SH9AVPE is the active production equivalent.

Q: What is the difference between TP11SH9AVPE and 800SP9B6M7RE? A: Both parts meet the same electrical and mechanical specifications. The primary difference is manufacturer: TP11SH9AVPE is C&K, while 800SP9B6M7RE is E-Switch. The 800SP9B6M7RE has a rated electrical life of 50,000 cycles versus 60,000 cycles for the C&K part. Selection depends on supplier availability and application cycle requirements.

Q: Are there packaging differences between these substitutes? A: TP11SH9AVKE and TP11SH9AVPE packaging information is not specified in the technical data. The 800SP9B6M7RE is supplied in Bulk packaging.

Q: Do all substitute parts meet RoHS compliance? A: Yes. TP11SH9AVKE is ROHS3 Compliant, TP11SH9AVPE is RoHS Compliant, and 800SP9B6M7RE is ROHS3 Compliant. All parts meet current environmental regulations.

Q: Can the 800SP9B6M7RE be used in applications requiring 60,000 cycle electrical life? A: The 800SP9B6M7RE is rated for 50,000 electrical cycles. Applications requiring 60,000 cycles should use TP11SH9AVPE or TP11SH9AVKE. Duty cycle analysis is necessary to determine if the lower cycle rating is acceptable for specific applications.