TP11CGPC2 Equivalent & Substitute Parts

Part Overview

The TP11CGPC2 is a pushbutton switch manufactured by TE Connectivity ALCOSWITCH Switches, classified as a Standard Through Hole SPST-NO (Single Pole Single Throw - Normally Open) device. This switch is rated for 0.4VA at 20V AC/DC with a rectangular plunger actuator in red. The product is currently Active in status with 1094 pieces available in inventory.

Equivalent and substitute parts are identified to provide design flexibility, accommodate supply chain variations, and support component selection based on specific application requirements and compliance certifications.

Substiute Parts

TP11CGPC2

TE Connectivity ALCOSWITCH SwitchesIn Stock: 1120TP11CGPC2 Datasheet

Current PartRFQ

1825095-2

TE Connectivity ALCOSWITCH SwitchesIn Stock: 21271825095-2 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TP11CGPC2 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Circuit configuration: SPST-NO
• Switch function: Off-Mom (Momentary)
• Current rating: 0.4VA (AC/DC)
• Voltage rating: 20V AC and 20V DC

Mechanical Parameters:

• Mounting type: Through Hole
• Actuator type: Rectangular, Plunger
• Actuator color: Red
• Termination style: PC Pin

Environmental Parameters:

• Operating temperature range: -30°C ~ 65°C
• Electrical life: 100,000 Cycles

The substitute part 1825095-2 meets all these criteria and is therefore classified as a direct equivalent. Both parts share identical electrical and mechanical specifications, enabling interchangeability in circuit designs and PCB layouts.

Parameter Comparison

Engineering Selection Recommendations

Both TP11CGPC2 and 1825095-2 are functionally equivalent pushbutton switches with identical electrical and mechanical specifications. Selection between these parts should be based on the following criteria:

TP11CGPC2 Selection:

• Use when RoHS compliance is not a design requirement
• Suitable for applications where moisture sensitivity classification is not specified
• Current inventory: 1094 pieces

1825095-2 Selection:

• Use when ROHS3 compliance is required
• Use when moisture sensitivity level documentation is required (MSL 1 - Unlimited)
• Provides enhanced compliance documentation for regulated applications
• Current inventory: 2046 pieces

Both parts are manufactured by TE Connectivity ALCOSWITCH Switches and carry the same ECCN (EAR99) and HTSUS (8536.50.9031) classifications. The choice between these equivalent parts depends on compliance requirements and supply availability rather than functional performance.

Frequently Asked Questions (FAQ)

Q: Can 1825095-2 be used as a direct replacement for TP11CGPC2 in existing designs?

A: Yes. Both parts are electrically and mechanically identical with matching circuit configuration (SPST-NO), current rating (0.4VA AC/DC), voltage rating (20V), mounting type (Through Hole), actuator type (Rectangular Plunger, Red), and termination style (PC Pin). No circuit redesign or PCB layout modification is required.

Q: What is the difference between TP11CGPC2 and 1825095-2?

A: The primary differences are compliance certifications. The 1825095-2 is ROHS3 compliant with documented Moisture Sensitivity Level (MSL 1 - Unlimited), while the TP11CGPC2 lists these as not applicable. Functionally and mechanically, both parts are identical.

Q: Are both parts available in the same packaging?

A: Yes. Both TP11CGPC2 and 1825095-2 are supplied in Bulk packaging and use identical PC Pin termination style suitable for through-hole PCB assembly.

Q: Which part should be selected for new designs?

A: For new designs requiring compliance documentation, 1825095-2 is recommended due to ROHS3 compliance and defined moisture sensitivity level. For applications without specific compliance requirements, either part is suitable based on availability.

Q: Do these parts have the same operating temperature range?

A: Yes. Both TP11CGPC2 and 1825095-2 operate across the identical temperature range of -30°C to 65°C with 100,000 cycle electrical life rating.

Q: Can these switches be used interchangeably on the same PCB?

A: Yes. Both parts share identical through-hole PC pin termination and mechanical dimensions, allowing direct substitution without PCB modification or rework.