TP11CGPC0 Equivalent & Substitute Parts

Part Overview

The TP11CGPC0 is a pushbutton switch manufactured by TE Connectivity ALCOSWITCH Switches, configured as a Standard SPST-NO (Single Pole Single Throw - Normally Open) momentary contact switch. This component is rated for 0.4VA at 20V AC/DC with a through-hole mounting configuration and rectangular plunger actuator. The part is currently Active in product status with 726 units in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity for applications requiring identical electrical and mechanical specifications.

Substiute Parts

TP11CGPC0

TE Connectivity ALCOSWITCH SwitchesIn Stock: 784TP11CGPC0 Datasheet

Current PartRFQ

1825095-1

TE Connectivity ALCOSWITCH SwitchesIn Stock: 56861825095-1 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TP11CGPC0 is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part 1825095-1 qualifies as a direct equivalent based on the following matching criteria:

Electrical Parameters (Must Match Exactly):

• Circuit configuration: SPST-NO
• Current rating: 0.4VA (AC/DC)
• Voltage rating AC: 20 V
• Voltage rating DC: 20 V
• Electrical life: 100,000 cycles

Mechanical Parameters (Must Match Exactly):

• Mounting type: Through Hole
• Switch type: Standard
• Switch function: Off-Mom (Momentary)
• Actuator type: Rectangular, Plunger
• Termination style: PC Pin
• Operating temperature range: -30°C ~ 65°C

Compliance Parameters:

• RoHS3 Compliant status
• ECCN classification: EAR99
• HTSUS code: 8536.50.9031

Both the main part and substitute part share identical specifications across all provided parameters, establishing direct substitutability within the TP series pushbutton switch family.

Parameter Comparison

Engineering Selection Recommendations

Both TP11CGPC0 and 1825095-1 are Active products manufactured by TE Connectivity ALCOSWITCH Switches with full ROHS3 compliance and identical electrical and mechanical specifications. Selection between these parts is based on inventory availability and procurement requirements rather than technical differentiation.

The TP11CGPC0 carries 726 units in current stock, while the substitute part 1825095-1 maintains higher inventory levels at 5607 units. Both parts meet all regulatory requirements under EAR99 classification and are suitable for applications requiring SPST-NO momentary contact switching at 0.4VA and 20V ratings.

The substitute part 1825095-1 is classified as Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity constraints during storage and handling. This represents an operational advantage for extended shelf life and simplified logistics management compared to parts with higher MSL ratings.

Frequently Asked Questions (FAQ)

Q: Can 1825095-1 be used as a direct replacement for TP11CGPC0 in existing designs?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters, including circuit configuration (SPST-NO), current rating (0.4VA AC/DC), voltage rating (20V), mounting type (through hole), and operating temperature range (-30°C to 65°C). No design modifications are required.

Q: Are there differences in compliance or certifications between these parts?

A: No. Both parts carry identical ROHS3 compliance status, EAR99 export classification, and HTSUS code 8536.50.9031. Regulatory requirements are equivalent.

Q: What is the significance of the Moisture Sensitivity Level difference?

A: The TP11CGPC0 lists MSL as Not Applicable, while 1825095-1 is classified as MSL 1 (Unlimited). MSL 1 indicates no moisture sensitivity constraints, allowing indefinite storage without desiccant packaging or environmental controls. This simplifies procurement and inventory management.

Q: Are the actuator and physical dimensions identical?

A: Yes. Both parts feature rectangular plunger actuators with black coloring, no marking, and identical through-hole PC pin termination. Physical form factor and panel mounting characteristics are equivalent.

Q: What is the basis for substitution between these TP series parts?

A: Substitution is based on complete electrical equivalence (SPST-NO circuit, 0.4VA, 20V ratings, 100,000 cycle electrical life) and mechanical equivalence (through-hole mounting, standard type, momentary function, rectangular plunger actuator, PC pin termination). Both parts operate across the identical -30°C to 65°C temperature range.

Q: Can inventory selection be based on availability alone?

A: Yes. Since all electrical, mechanical, and compliance parameters are identical, component selection can be determined by inventory availability, lead time, and procurement cost without technical trade-offs.