TNPW0805976KBEEA Equivalent & Substitute Parts

Part Overview

The TNPW0805976KBEEA is a 976 kOhms ±0.1% thin film chip resistor manufactured by Vishay Dale in the 0805 (2012 Metric) package. This component is rated for 0.26W power dissipation and is designed for automotive applications with AEC-Q200 qualification, anti-sulfur coating, and moisture resistance. The part is currently active in production with 980 pieces in stock. Substitute parts are identified when equivalent electrical specifications, mechanical compatibility, and compliance certifications align with the original component's requirements.

Substiute Parts

TNPW0805976KBEEA

Vishay DaleIn Stock: 1041TNPW0805976KBEEA Datasheet

Current PartRFQ

ERA-6AEB9763V

Panasonic Electronic ComponentsIn Stock: 19831ERA-6AEB9763V Datasheet

DirectRFQ

RT0805BRD07976KL

YAGEOIn Stock: 20597RT0805BRD07976KL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TNPW0805976KBEEA are qualified based on the following criteria:

• Identical resistance value: 976 kOhms
• Matching tolerance: ±0.1%
• Identical package: 0805 (2012 Metric)
• Matching composition: Thin Film
• Matching temperature coefficient: ±25ppm/°C
• RoHS3 compliance
• MSL rating of 1 (Unlimited)

The identified substitutes meet these core electrical and mechanical parameters. Power rating variations and operating temperature range differences are noted in the comparison table below, as these may affect suitability depending on circuit requirements.

Parameter Comparison

Engineering Selection Recommendations

Both ERA-6AEB9763V and RT0805BRD07976KL are electrically and mechanically compatible with the TNPW0805976KBEEA in applications where the reduced power rating of 0.125W is acceptable. The ERA-6AEB9763V maintains AEC-Q200 automotive qualification matching the original part. The RT0805BRD07976KL does not carry AEC-Q200 certification and operates to a maximum temperature of 155°C compared to the original 175°C specification. Component selection should be based on circuit power dissipation requirements and automotive compliance mandates.

Frequently Asked Questions (FAQ)

Q: Can ERA-6AEB9763V or RT0805BRD07976KL be used as direct replacements for TNPW0805976KBEEA?

A: Both parts share identical resistance, tolerance, composition, and package specifications. However, the substitute parts have a lower power rating of 0.125W versus 0.26W for the original. Substitution is valid only if circuit power dissipation does not exceed 0.125W at the resistor location.

Q: What is the significance of the AEC-Q200 rating difference?

A: The ERA-6AEB9763V carries AEC-Q200 automotive qualification, matching the original TNPW0805976KBEEA. The RT0805BRD07976KL does not have this certification. For automotive applications requiring AEC-Q200 compliance, ERA-6AEB9763V is the appropriate substitute.

Q: Are there physical compatibility concerns with the substitute parts?

A: All three parts use the 0805 (2012 Metric) package with identical length and width dimensions. The substitute parts have a maximum seated height of 0.024" (0.60mm) compared to 0.022" (0.55mm) for the original. This minor height difference is within standard PCB assembly tolerances and does not affect mechanical compatibility.

Q: Do the substitute parts meet RoHS and MSL requirements?

A: Yes. Both ERA-6AEB9763V and RT0805BRD07976KL are ROHS3 compliant with MSL rating of 1 (Unlimited), matching the original part specifications.

Q: What is the operating temperature range difference?

A: The original TNPW0805976KBEEA operates from -55°C to 175°C. Both substitute parts operate from -55°C to 155°C. Applications requiring operation above 155°C require the original part or an alternative component rated for higher temperatures.