TNPW0805560KBEEA Equivalent & Substitute Parts

Part Overview

The TNPW0805560KBEEA is a 560 kOhms ±0.1% thin film chip resistor manufactured by Vishay Dale in the 0805 (2012 Metric) package. This component is rated for 0.26W power dissipation and is designed for automotive applications with AEC-Q200 qualification, anti-sulfur coating, and moisture resistance. The part is currently active in production with 794 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when supply chain optimization is required.

Substiute Parts

TNPW0805560KBEEA

Vishay DaleIn Stock: 897TNPW0805560KBEEA Datasheet

Current PartRFQ

ERA-6AEB564V

Panasonic Electronic ComponentsIn Stock: 17746ERA-6AEB564V Datasheet

DirectRFQ

RG2012P-564-B-T5

SusumuIn Stock: 10827RG2012P-564-B-T5 Datasheet

DirectRFQ

RT0805BRD07560KL

YAGEOIn Stock: 1824RT0805BRD07560KL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TNPW0805560KBEEA is determined by the following critical parameters:

• Resistance Value: 560 kOhms (exact match required)
• Tolerance: ±0.1% (exact match required)
• Package: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Temperature Coefficient: ±25ppm/°C (exact match required)
• Automotive Compliance: AEC-Q200 (required for automotive applications)
• RoHS Status: ROHS3 Compliant (required for regulatory compliance)

The three substitute parts listed below meet all critical substitution criteria. Differences in power rating and maximum operating temperature are noted but do not preclude substitution in applications where the TNPW0805560KBEEA specifications are not fully utilized.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Automotive-Qualified):

ERA-6AEB564V (Panasonic Electronic Components) and RG2012P-564-B-T5 (Susumu) are direct substitutes with full AEC-Q200 automotive qualification. Both maintain the required ±0.1% tolerance, ±25ppm/°C temperature coefficient, and 0805 package specification. The reduced power rating (0.125W vs. 0.26W) and lower maximum operating temperature (-55°C ~ 155°C vs. -55°C ~ 175°C) are acceptable in applications where circuit design does not require the full power dissipation capability of the TNPW0805560KBEEA. RG2012P-564-B-T5 includes anti-sulfur coating matching the primary part specification.

Secondary Substitute (Non-Automotive):

RT0805BRD07560KL (YAGEO) meets all electrical and package requirements but lacks AEC-Q200 automotive qualification. This part is suitable only for non-automotive applications or where automotive certification is not a design requirement.

Frequently Asked Questions (FAQ)

Q: Can ERA-6AEB564V replace TNPW0805560KBEEA in automotive applications?

A: Yes. ERA-6AEB564V meets all critical substitution parameters: 560 kOhms ±0.1% resistance, ±25ppm/°C temperature coefficient, 0805 package, thin film composition, and AEC-Q200 automotive qualification. The lower power rating (0.125W vs. 0.26W) does not affect substitution eligibility if circuit power dissipation does not exceed 0.125W.

Q: What is the difference between the power ratings of these parts?

A: TNPW0805560KBEEA is rated for 0.26W, while ERA-6AEB564V, RG2012P-564-B-T5, and RT0805BRD07560KL are rated for 0.125W (1/8W). The substitute parts can be used in applications where the actual power dissipation does not exceed 0.125W. If circuit design requires power dissipation above 0.125W, the TNPW0805560KBEEA must be retained.

Q: Why does RT0805BRD07560KL lack AEC-Q200 certification?

A: RT0805BRD07560KL is manufactured by YAGEO without automotive qualification. This part is electrically and mechanically compatible but is restricted to non-automotive applications or designs where automotive certification is not required.

Q: Are all substitute parts available in Tape & Reel packaging?

A: ERA-6AEB564V and RG2012P-564-B-T5 are supplied in Tape & Reel (TR) packaging. RT0805BRD07560KL is supplied in Cut Tape (CT) & Digi-Reel® packaging. Packaging format may affect procurement and assembly processes.

Q: What is the operating temperature limitation of the substitute parts?

A: ERA-6AEB564V, RG2012P-564-B-T5, and RT0805BRD07560KL are rated for -55°C ~ 155°C, compared to TNPW0805560KBEEA at -55°C ~ 175°C. Substitution is valid only if circuit operating temperature does not exceed 155°C.