TNPW0805536KBEEA Equivalent & Substitute Parts

Part Overview

The TNPW0805536KBEEA is a 536 kOhms ±0.1% thin film chip resistor manufactured by Vishay Dale in the 0805 (2012 Metric) package. This component is rated for 0.26W power dissipation and is designed for automotive applications with AEC-Q200 qualification, anti-sulfur coating, and moisture resistance. The part is currently active in production with 1026 units in stock. Substitute parts are identified when equivalent resistance values, tolerance specifications, package dimensions, and automotive compliance ratings are maintained across alternative manufacturers.

Substiute Parts

TNPW0805536KBEEA

Vishay DaleIn Stock: 1102TNPW0805536KBEEA Datasheet

Current PartRFQ

ERA-6AEB5363V

Panasonic Electronic ComponentsIn Stock: 30893ERA-6AEB5363V Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TNPW0805536KBEEA is determined by the following criteria:

• Resistance value must be 536 kOhms
• Tolerance must be ±0.1%
• Package must be 0805 (2012 Metric)
• Composition must be thin film
• Temperature coefficient must be ±25ppm/°C
• Automotive AEC-Q200 qualification is required
• RoHS3 compliance is required
• Moisture Sensitivity Level must be 1 (Unlimited)

The ERA-6AEB5363V from Panasonic Electronic Components meets all substitution criteria. While the power rating differs (0.125W versus 0.26W), this represents a derating condition acceptable in applications where the TNPW0805536KBEEA's full 0.26W capacity is not required.

Parameter Comparison

Engineering Selection Recommendations

The ERA-6AEB5363V is a qualified substitute for the TNPW0805536KBEEA based on matching resistance, tolerance, package, composition, temperature coefficient, and automotive AEC-Q200 compliance. Both components are ROHS3 compliant with MSL 1 ratings.

The primary design consideration is the power rating differential. The ERA-6AEB5363V is rated at 0.125W compared to the TNPW0805536KBEEA at 0.26W. Selection of the Panasonic substitute is appropriate when circuit power dissipation at this resistor location does not exceed 0.125W. The upper operating temperature limit of the ERA-6AEB5363V is 155°C versus 175°C for the Vishay Dale part; applications requiring operation above 155°C require the primary part.

Frequently Asked Questions (FAQ)

Q: Can the ERA-6AEB5363V replace the TNPW0805536KBEEA in all applications?

A: The ERA-6AEB5363V is a direct substitute when power dissipation at the resistor does not exceed 0.125W and operating temperature does not exceed 155°C. Applications requiring the full 0.26W rating or temperatures above 155°C require the TNPW0805536KBEEA.

Q: Are the physical dimensions identical?

A: Both components use the 0805 (2012 Metric) package with identical length and width (0.079" x 0.049"). The seated height differs slightly: TNPW0805536KBEEA at 0.022" (0.55mm) maximum and ERA-6AEB5363V at 0.024" (0.60mm) maximum. This difference is negligible for standard PCB assembly.

Q: Do both parts meet automotive qualification requirements?

A: Yes. Both the TNPW0805536KBEEA and ERA-6AEB5363V carry AEC-Q200 automotive qualification and are ROHS3 compliant with MSL 1 moisture sensitivity ratings.

Q: What is the tolerance specification for both parts?

A: Both components are specified at ±0.1% tolerance with ±25ppm/°C temperature coefficient, ensuring equivalent precision performance.