TNPW0805280KBEEA Equivalent & Substitute Parts

Part Overview

The TNPW0805280KBEEA is a 280 kOhms ±0.1% thin film chip resistor manufactured by Vishay Dale in 0805 (2012 Metric) package format. This component is rated for 0.26W power dissipation and is designed for automotive applications with AEC-Q200 certification, anti-sulfur coating, and moisture resistance. The part is currently in active production status with 3760 units in stock. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance ratings are maintained across alternative manufacturers.

Substiute Parts

TNPW0805280KBEEA

Vishay DaleIn Stock: 3796TNPW0805280KBEEA Datasheet

Current PartRFQ

ERA-6AEB2803V

Panasonic Electronic ComponentsIn Stock: 5298ERA-6AEB2803V Datasheet

DirectRFQ

RG2012P-2803-B-T5

SusumuIn Stock: 3787RG2012P-2803-B-T5 Datasheet

DirectRFQ

RT0805BRD07280KL

YAGEOIn Stock: 5664RT0805BRD07280KL Datasheet

DirectRFQ

3-2176094-6

TE Connectivity Passive ProductIn Stock: 28103-2176094-6 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Mandatory Matching Parameters:

• Resistance value: 280 kOhms
• Tolerance: ±0.1%
• Package / Case: 0805 (2012 Metric)
• Composition: Thin Film
• Temperature Coefficient: ±25ppm/°C
• Moisture Sensitivity Level: 1 (Unlimited)
• RoHS Compliance: ROHS3 Compliant

Allowable Variation Parameters:

• Power Rating: Substitute parts may have equal or greater power rating than the main part
• Operating Temperature Range: Substitute parts must support the minimum operating range of -55°C; upper limit may vary
• Automotive Certification: AEC-Q200 certification is preferred but not mandatory for all substitutes
• Packaging Format: Cut Tape (CT), Digi-Reel®, or Tape & Reel (TR) formats are interchangeable

The four substitute parts listed below meet these criteria and are electrically and mechanically compatible with TNPW0805280KBEEA.

Parameter Comparison

Engineering Selection Recommendations

ERA-6AEB2803V (Panasonic Electronic Components): This substitute maintains full electrical equivalence with ±0.1% tolerance and ±25ppm/°C temperature coefficient. It carries AEC-Q200 automotive certification and ROHS3 compliance. The power rating of 0.125W is lower than the main part; applications requiring the full 0.26W dissipation capacity should not use this substitute. Operating temperature range extends to 155°C, which is acceptable for most automotive applications operating below this threshold.

RG2012P-2803-B-T5 (Susumu): This substitute provides electrical equivalence with anti-sulfur coating and AEC-Q200 certification. Power rating is 0.125W, limiting use to circuits with lower dissipation requirements. ROHS3 compliance and MSL 1 rating are maintained. Height is the lowest among substitutes at 0.020" (0.50mm), which may be advantageous in space-constrained layouts.

RT0805BRD07280KL (YAGEO): This substitute meets all electrical specifications with ±0.1% tolerance and ±25ppm/°C temperature coefficient. ROHS3 compliance and MSL 1 rating are maintained. AEC-Q200 certification is not present; applications requiring automotive qualification should not use this part. Power rating of 0.125W applies the same limitation as other lower-rated substitutes.

3-2176094-6 (TE Connectivity Passive Product): This substitute maintains electrical equivalence with 0.25W power rating, which is closer to the main part's 0.26W specification. However, RoHS compliance status is non-compliant, and REACH status is vendor undefined. This part is not suitable for applications requiring ROHS3 compliance or regulated supply chains.

Frequently Asked Questions (FAQ)

Q: Can ERA-6AEB2803V be used in place of TNPW0805280KBEEA in all applications?

A: ERA-6AEB2803V is electrically equivalent in resistance, tolerance, and temperature coefficient. However, its 0.125W power rating is lower than the main part's 0.26W rating. Use this substitute only in circuits where power dissipation does not exceed 0.125W. Operating temperature range is limited to 155°C maximum.

Q: What is the difference between the substitute parts in terms of power rating?

A: ERA-6AEB2803V, RG2012P-2803-B-T5, and RT0805BRD07280KL are rated at 0.125W (1/8W). The 3-2176094-6 is rated at 0.25W (1/4W). The main part TNPW0805280KBEEA is rated at 0.26W. Select substitutes based on actual circuit power dissipation requirements.

Q: Are all substitutes suitable for automotive applications?

A: ERA-6AEB2803V and RG2012P-2803-B-T5 carry AEC-Q200 certification. RT0805BRD07280KL does not have AEC-Q200 certification. The 3-2176094-6 lacks both AEC-Q200 certification and ROHS3 compliance. For automotive applications requiring qualification, use only ERA-6AEB2803V or RG2012P-2803-B-T5.

Q: Does packaging format affect substitution compatibility?

A: All substitute parts use 0805 (2012 Metric) package format with identical footprint dimensions. Packaging delivery format (Tape & Reel, Cut Tape, or Digi-Reel) does not affect electrical or mechanical compatibility on the PCB.

Q: Which substitute has the lowest profile for space-constrained designs?

A: RG2012P-2803-B-T5 has the lowest seated height at 0.020" (0.50mm), compared to 0.022" (0.55mm) for the main part. Other substitutes range from 0.024" to 0.026" seated height.

Q: Is the 3-2176094-6 suitable for new designs?

A: The 3-2176094-6 is RoHS non-compliant and has undefined REACH status. This part is not recommended for new designs requiring regulatory compliance. It may be used only in legacy or non-regulated applications.

Q: What is the impact of operating temperature range differences?

A: The main part operates to 175°C; all substitutes operate to 155°C maximum. For applications requiring operation above 155°C, only the main part TNPW0805280KBEEA is suitable.