TNPW0805220RBEEA Equivalent & Substitute Parts

Part Overview

The TNPW0805220RBEEA is a 220 Ohm ±0.1% thin film chip resistor manufactured by Vishay Dale in 0805 (2012 Metric) package format. This component is rated for 0.26W power dissipation and is designed for automotive applications with AEC-Q200 qualification, anti-sulfur coating, and moisture resistance. The part is currently active in production with 824 units in stock. Substitute parts are identified when equivalent electrical specifications and package compatibility are maintained across alternative manufacturers.

Substiute Parts

TNPW0805220RBEEA

Vishay DaleIn Stock: 911TNPW0805220RBEEA Datasheet

Current PartRFQ

ERA-6AEB221V

Panasonic Electronic ComponentsIn Stock: 37456ERA-6AEB221V Datasheet

DirectRFQ

RG2012P-221-B-T5

SusumuIn Stock: 14972RG2012P-221-B-T5 Datasheet

DirectRFQ

RT0805BRD07220RL

YAGEOIn Stock: 4762RT0805BRD07220RL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TNPW0805220RBEEA are qualified based on the following criteria:

• Identical resistance value: 220 Ohms
• Matching tolerance: ±0.1%
• Compatible package: 0805 (2012 Metric)
• Matching composition: Thin Film
• Identical temperature coefficient: ±25ppm/°C
• AEC-Q200 automotive qualification
• ROHS3 compliance
• MSL 1 rating

The three identified substitutes meet these core electrical and mechanical parameters. Variations in power rating (0.125W vs. 0.26W) and maximum operating temperature (-55°C ~ 155°C vs. -55°C ~ 175°C) represent deviations from the original specification that must be evaluated for application suitability.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts maintain active product status and ROHS3 compliance with AEC-Q200 automotive qualification. Selection between substitutes should account for the following specification deviations:

ERA-6AEB221V (Panasonic) and RG2012P-221-B-T5 (Susumu) and RT0805BRD07220RL (YAGEO) all feature reduced power ratings of 0.125W compared to the original 0.26W specification. These substitutes also operate to a maximum temperature of 155°C versus the original 175°C upper limit. RG2012P-221-B-T5 includes anti-sulfur coating matching the original part's environmental protection features. All substitutes are available in higher inventory quantities, with ERA-6AEB221V offering 37,405 units in stock.

Frequently Asked Questions (FAQ)

Q: Can ERA-6AEB221V, RG2012P-221-B-T5, and RT0805BRD07220RL be used interchangeably with TNPW0805220RBEEA?

A: These parts share identical resistance, tolerance, package, composition, and temperature coefficient specifications. However, the substitute parts have lower power ratings (0.125W vs. 0.26W) and reduced maximum operating temperature (155°C vs. 175°C). Interchangeability depends on whether your application requires the higher power dissipation capability or extended temperature range of the original part.

Q: What is the significance of the 0805 package designation?

A: The 0805 (2012 Metric) package is a standardized surface-mount resistor format measuring 2.00mm × 1.25mm. All listed parts use this identical package, ensuring mechanical and electrical compatibility on PCB layouts designed for 0805 components.

Q: Are all substitute parts AEC-Q200 qualified?

A: Yes. All three substitute parts carry AEC-Q200 automotive qualification, meeting the same reliability and quality standards as the original TNPW0805220RBEEA.

Q: What does ±0.1% tolerance mean?

A: Tolerance specifies the maximum deviation from the nominal 220 Ohm resistance value. ±0.1% tolerance means the actual resistance will fall between 219.78 Ohms and 220.22 Ohms, providing high precision suitable for precision analog circuits and measurement applications.

Q: Why do the substitute parts have lower power ratings?

A: Power rating reflects the maximum power dissipation the resistor can handle without exceeding temperature limits. The substitute parts are rated for 0.125W (1/8W) versus the original 0.26W. This difference is a manufacturing specification variation between vendors and does not affect electrical performance in applications where power dissipation remains below the substitute part's rating.