TNPW0805215KBEEA Equivalent & Substitute Parts

Part Overview

The TNPW0805215KBEEA is a 215 kOhms ±0.1% 0.26W chip resistor in 0805 (2012 Metric) package manufactured by Vishay Dale. This thin film resistor features anti-sulfur coating, automotive AEC-Q200 qualification, and moisture resistance, making it suitable for demanding automotive and industrial applications. The part is currently active in production with 1135 units in stock.

Substitute parts are necessary when the primary part becomes unavailable, when supply chain optimization is required, or when design flexibility across qualified manufacturers is needed while maintaining electrical and mechanical compatibility.

Substiute Parts

TNPW0805215KBEEA

Vishay DaleIn Stock: 1190TNPW0805215KBEEA Datasheet

Current PartRFQ

ERA-6AEB2153V

Panasonic Electronic ComponentsIn Stock: 15933ERA-6AEB2153V Datasheet

DirectRFQ

RP73PF2A215KBTDF

TE Connectivity Passive ProductIn Stock: 3846RP73PF2A215KBTDF Datasheet

DirectRFQ

RT0805BRD07215KL

YAGEOIn Stock: 5205RT0805BRD07215KL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TNPW0805215KBEEA is determined by the following mandatory parameters:

• Resistance value: 215 kOhms (exact match required)
• Tolerance: ±0.1% (exact match required)
• Package: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Temperature Coefficient: ±25ppm/°C (exact match required)
• RoHS Compliance: ROHS3 Compliant (exact match required)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

The substitute parts listed below meet all mandatory electrical and mechanical parameters. Power rating variations are acceptable when the substitute part rating meets or exceeds circuit requirements. Operating temperature range variations are acceptable when the substitute part range encompasses the application's operating conditions.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts are active products with ROHS3 compliance and MSL 1 rating, ensuring regulatory and environmental compatibility with the primary part.

ERA-6AEB2153V (Panasonic Electronic Components) carries AEC-Q200 automotive qualification matching the primary part's automotive-grade specification. This part is suitable for automotive applications requiring automotive-grade components.

RP73PF2A215KBTDF (TE Connectivity Passive Product) does not carry explicit AEC-Q200 designation in the provided specifications. Selection of this part should be evaluated against specific automotive qualification requirements of the application.

RT0805BRD07215KL (YAGEO) does not carry explicit AEC-Q200 designation in the provided specifications. Selection of this part should be evaluated against specific automotive qualification requirements of the application.

For applications operating above 155°C, the primary part TNPW0805215KBEEA is the only option, as all substitute parts are rated to -55°C ~ 155°C maximum.

For applications with power dissipation exceeding 0.125W, ERA-6AEB2153V and RT0805BRD07215KL are not suitable. RP73PF2A215KBTDF with 0.25W rating is acceptable for power levels up to 0.25W. The primary part with 0.26W rating accommodates the highest power dissipation.

Frequently Asked Questions (FAQ)

Q: Can ERA-6AEB2153V replace TNPW0805215KBEEA in all applications?

A: ERA-6AEB2153V is electrically and mechanically compatible for applications where power dissipation does not exceed 0.125W and operating temperature does not exceed 155°C. Both parts share identical resistance, tolerance, temperature coefficient, and package specifications. The primary part's higher power rating (0.26W) and extended temperature range (-55°C ~ 175°C) provide additional margin in demanding applications.

Q: What is the impact of different power ratings among substitute parts?

A: Power rating indicates the maximum continuous power dissipation the resistor can handle without exceeding temperature limits. The primary part (0.26W) accommodates higher power dissipation than ERA-6AEB2153V and RT0805BRD07215KL (0.125W each) and RP73PF2A215KBTDF (0.25W). Selection must ensure the chosen part's power rating meets or exceeds the circuit's actual power dissipation at the resistor.

Q: Are height differences between parts significant for PCB assembly?

A: Height variations range from 0.022" (0.55mm) for the primary part to 0.026" (0.65mm) for RP73PF2A215KBTDF. These differences are within typical PCB assembly tolerances for 0805 components. Height differences are not significant for standard PCB designs but should be verified for applications with tight vertical clearance constraints.

Q: Which substitute part is recommended for automotive applications?

A: ERA-6AEB2153V carries AEC-Q200 automotive qualification, matching the primary part's automotive-grade specification. This part is the preferred substitute for automotive applications requiring automotive-grade component certification.

Q: Can substitute parts be used interchangeably on the same PCB?

A: All substitute parts share identical 0805 package footprints and mechanical dimensions within assembly tolerances. Electrical parameters (resistance, tolerance, temperature coefficient) are identical across all parts. Substitution is mechanically and electrically feasible provided power rating and operating temperature requirements are met by the selected part.