TNPW0805210KBEEA Equivalent & Substitute Parts

Part Overview

The TNPW0805210KBEEA is a 210 kOhms ±0.1% thin film chip resistor manufactured by Vishay Dale in the 0805 (2012 Metric) package. This component is rated for 0.26W power dissipation and is designed for automotive applications with AEC-Q200 certification, anti-sulfur coating, and moisture resistance. The part is currently active in production with 909 units in stock. Equivalent and substitute parts are identified for applications requiring alternative sourcing, inventory management, or specific compliance requirements.

Substiute Parts

TNPW0805210KBEEA

Vishay DaleIn Stock: 1000TNPW0805210KBEEA Datasheet

Current PartRFQ

ERA-6AEB2103V

Panasonic Electronic ComponentsIn Stock: 24940ERA-6AEB2103V Datasheet

DirectRFQ

RT0805BRD07210KL

YAGEOIn Stock: 2288RT0805BRD07210KL Datasheet

DirectRFQ

2-2176094-5

TE Connectivity Passive ProductIn Stock: 9762-2176094-5 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following parameters: resistance value (210 kOhms), tolerance (±0.1%), package type (0805), composition (thin film), temperature coefficient (±25ppm/°C), and compliance certifications. The identified substitute parts maintain these core electrical and mechanical specifications. Power rating variations are noted where they differ from the main part, as lower power ratings may impose circuit design constraints. Operating temperature range differences are documented, as the main part supports extended high-temperature operation to 175°C compared to 155°C for certain substitutes. Automotive AEC-Q200 certification and RoHS compliance status are specified for each part to support design and procurement decisions.

Parameter Comparison

Engineering Selection Recommendations

ERA-6AEB2103V (Panasonic Electronic Components) is a direct substitute for applications where the 0.125W power rating is sufficient. This part maintains AEC-Q200 certification and ROHS3 compliance. The operating temperature range extends to 155°C, which is acceptable for most automotive applications but does not support the extended 175°C maximum of the main part.

RT0805BRD07210KL (YAGEO) provides equivalent electrical performance with 0.125W power rating. This part is ROHS3 compliant but lacks AEC-Q200 certification. The operating temperature range is -55°C to 155°C. Selection of this part requires confirmation that automotive qualification is not a design requirement.

2-2176094-5 (TE Connectivity Passive Product) is a manufacturer-recommended substitute with 0.25W power rating, providing closer alignment to the main part's power specification. However, this part is RoHS non-compliant and does not carry AEC-Q200 certification. Operating temperature range is -55°C to 155°C. This part is suitable only for applications where RoHS compliance is not mandated and automotive qualification is not required.

Frequently Asked Questions (FAQ)

Q: Can ERA-6AEB2103V replace TNPW0805210KBEEA in all applications?

A: ERA-6AEB2103V is electrically and mechanically compatible for applications where the 0.125W power rating meets circuit requirements. Both parts share identical resistance, tolerance, temperature coefficient, and package specifications. The operating temperature range difference (155°C vs. 175°C maximum) must be evaluated against circuit thermal requirements. Both parts carry AEC-Q200 certification and ROHS3 compliance.

Q: What is the primary difference between the substitute parts?

A: The substitute parts differ in power rating and compliance certifications. ERA-6AEB2103V and RT0805BRD07210KL are rated at 0.125W, while 2-2176094-5 is rated at 0.25W. ERA-6AEB2103V maintains AEC-Q200 certification; RT0805BRD07210KL and 2-2176094-5 do not. Only ERA-6AEB2103V and the main part are ROHS3 compliant; 2-2176094-5 is RoHS non-compliant.

Q: Are all substitute parts suitable for automotive applications?

A: Only ERA-6AEB2103V carries AEC-Q200 certification alongside the main part. RT0805BRD07210KL and 2-2176094-5 lack this certification. Automotive application requirements must be confirmed before selecting these alternatives.

Q: Does package compatibility extend to all substitute parts?

A: All substitute parts use the 0805 (2012 Metric) package with identical footprint dimensions (0.079" L x 0.049" W). Physical board-level compatibility is maintained across all parts. Height variations are minimal (0.022" to 0.026" seated maximum) and do not affect standard PCB assembly processes.

Q: What compliance considerations apply to part selection?

A: The main part and ERA-6AEB2103V are ROHS3 compliant. RT0805BRD07210KL is ROHS3 compliant but lacks AEC-Q200 certification. 2-2176094-5 is RoHS non-compliant and lacks AEC-Q200 certification. Design specifications must confirm whether RoHS compliance and automotive qualification are required.