TNETE2201BPJDRG4 Equivalent & Substitute Parts

Part Overview

The TNETE2201BPJDRG4 is a half-duplex Gigabit Ethernet transceiver manufactured by Texas Instruments, designed for 1/1 transceiver configurations in 64-HTQFP surface mount packaging. This part operates at 1.25 Gbps data rate with a supply voltage range of 3.14V to 3.47V and is rated for 0°C to 70°C operating temperature.

The TNETE2201BPJDRG4 carries an Obsolete product status. Identifying equivalent substitute parts is necessary to maintain design continuity and ensure component availability for production, maintenance, and system upgrades.

Substiute Parts

TNETE2201BPJDRG4

Texas InstrumentsIn Stock: 830TNETE2201BPJDRG4 Datasheet

Current PartRFQ

TNETE2201BPJW

Texas InstrumentsIn Stock: 1819TNETE2201BPJW Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TNETE2201BPJDRG4 is determined by strict equivalence across the following critical parameters:

• Protocol: Gigabit Ethernet
• Number of Drivers/Receivers: 1/1 configuration
• Duplex Mode: Half-duplex operation
• Data Rate: 1.25 Gbps
• Supply Voltage Range: 3.14V ~ 3.47V
• Operating Temperature Range: 0°C ~ 70°C
• Package Type: 64-TQFP Exposed Pad (64-HTQFP 10x10)
• Mounting Type: Surface Mount
• RoHS Compliance: ROHS3 Compliant
• Moisture Sensitivity Level: 3 (168 Hours)

The TNETE2201BPJW meets all these criteria and qualifies as a direct substitute. The primary distinction is packaging format (Tray versus the original specification) and active product status, which ensures ongoing availability and supply chain support.

Parameter Comparison

Engineering Selection Recommendations

The TNETE2201BPJW is the qualified substitute for the obsolete TNETE2201BPJDRG4. Both parts maintain identical electrical and mechanical specifications across all critical parameters including protocol, data rate, voltage supply, operating temperature, and package configuration.

The TNETE2201BPJW carries Active product status, ensuring long-term availability and supply chain continuity. Both parts maintain equivalent RoHS3 compliance and REACH unaffected status, supporting regulatory requirements for current manufacturing standards.

The packaging format difference (Tray for the substitute) does not affect functional compatibility or performance characteristics. Component selection should prioritize the active-status substitute to ensure sustained availability for production and field replacement applications.

Frequently Asked Questions (FAQ)

Q: Can the TNETE2201BPJW directly replace the TNETE2201BPJDRG4 in existing designs?

A: Yes. Both parts are electrically and mechanically equivalent across all functional parameters. The 64-HTQFP (10x10) package footprint, pin configuration, voltage supply range, data rate, and operating temperature specifications are identical. No design modifications are required.

Q: What is the significance of the packaging format difference?

A: The original part uses an unspecified packaging format, while the substitute uses Tray packaging. This difference affects only the delivery and handling method during procurement and assembly. The component itself and its performance characteristics remain unchanged.

Q: Why is the TNETE2201BPJDRG4 marked as Obsolete?

A: Obsolete status indicates the manufacturer has discontinued production. The TNETE2201BPJW, with Active status, represents the current production equivalent and should be used for new designs and ongoing procurement.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts maintain identical RoHS3 compliance and REACH unaffected status. Moisture sensitivity level (MSL 3, 168 Hours) is equivalent for both parts.

Q: What are the critical parameters that define substitution eligibility?

A: Substitution is based on matching: Gigabit Ethernet protocol, 1/1 transceiver configuration, half-duplex operation, 1.25 Gbps data rate, 3.14V–3.47V supply voltage, 0°C–70°C operating temperature, 64-TQFP Exposed Pad package in 64-HTQFP (10x10) form factor, and surface mount mounting type.