TMS320DM6467ZUTD7 Equivalent & Substitute Parts

Part Overview

The TMS320DM6467ZUTD7 is a Digital Media System-on-Chip (DMSoC) from Texas Instruments' DaVinci™ series, designed for embedded multimedia processing applications. This device integrates a 729MHz DSP core with a 364.5MHz ARM® processor, supporting multiple communication interfaces including Ethernet, USB, SPI, I2C, and McASP. The part is currently classified as Obsolete, necessitating identification of functionally equivalent alternatives for ongoing system support and new design considerations.

Substiute Parts

TMS320DM6467ZUTD7

Texas InstrumentsIn Stock: 2087TMS320DM6467ZUTD7 Datasheet

Current PartRFQ

TMS320DM6467CCUTD7

Texas InstrumentsIn Stock: 65942TMS320DM6467CCUTD7 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TMS320DM6467ZUTD7 is determined by strict equivalence across the following critical parameters:

• Identical DSP and ARM® clock rates (729MHz DSP, 364.5MHz ARM®)
• Matching on-chip memory configuration (248kB RAM, 8kB ROM)
• Identical voltage specifications (1.20V core, 1.8V/3.3V I/O)
• Same operating temperature range (-40°C to 85°C)
• Identical package and pinout (529-BFBGA, 19x19)
• Equivalent interface support (EBI/EMI, Ethernet, HPI, I2C, McASP, PCI, SPI, UART, USB)

The TMS320DM6467CCUTD7 meets all substitution criteria as a direct functional equivalent within the TMS320DM646x series.

Parameter Comparison

Engineering Selection Recommendations

The TMS320DM6467CCUTD7 is the direct functional substitute for the TMS320DM6467ZUTD7. Both devices share identical electrical specifications, clock rates, memory configurations, and interface capabilities, ensuring pin-for-pin and functional compatibility.

Key differentiation factors:

• The TMS320DM6467ZUTD7 is classified as Obsolete with RoHS non-compliant status, limiting its use to legacy system maintenance and repair applications.
• The TMS320DM6467CCUTD7 is classified as Not For New Designs with ROHS3 compliance, making it suitable for existing inventory management and limited production runs where RoHS3 compliance is required.

For new design initiatives, alternative solutions within the TMS320DM646x series or successor product lines should be evaluated. Both parts maintain identical ECCN and HTSUS classifications, with no regulatory differentiation beyond RoHS compliance status.

Frequently Asked Questions (FAQ)

Q: Are the TMS320DM6467ZUTD7 and TMS320DM6467CCUTD7 pin-compatible?

A: Yes. Both devices use the 529-BFBGA (19x19) package with identical pinout and electrical specifications. Direct PCB-level substitution is supported without layout modifications.

Q: What is the primary difference between these two parts?

A: The TMS320DM6467ZUTD7 is Obsolete and RoHS non-compliant, while the TMS320DM6467CCUTD7 is Not For New Designs and ROHS3 compliant. Functional performance and electrical characteristics are identical.

Q: Can the TMS320DM6467CCUTD7 replace the TMS320DM6467ZUTD7 in existing designs?

A: Yes. The substitute part meets all electrical, thermal, and interface requirements. Existing firmware and software require no modification.

Q: What is the significance of the Moisture Sensitivity Level (MSL) rating?

A: Both parts carry MSL 4 (72 Hours), indicating identical moisture handling requirements during storage and assembly. Standard moisture control procedures apply to both variants.

Q: Are there any compliance or certification differences?

A: The primary difference is RoHS status. The TMS320DM6467ZUTD7 is RoHS non-compliant, while the TMS320DM6467CCUTD7 is ROHS3 compliant. Both maintain identical REACH and ECCN classifications.

Q: What packaging options are available for the TMS320DM6467CCUTD7?

A: The TMS320DM6467CCUTD7 is supplied in Tray packaging, while the TMS320DM6467ZUTD7 packaging type is unspecified. Both use the same 529-FCBGA (19x19) device package.