Traco Power TMP 10115 Equivalent & Substitute Parts Reference

Part Overview

The Traco Power TMP 10115 is an enclosed AC/DC converter with a single output of 15V at 666mA, rated for a maximum power of 10W. This device supports a wide universal input range of 85 ~ 264 VAC and 120 ~ 370 VDC, and is designed for ITE (Commercial) applications. The TMP 10115 features through hole mounting and comes in a 5-DIP module package, with international safety approvals including CB, CE, cULus, and cURus. The product status is listed as Obsolete, which necessitates the identification of alternative part numbers with comparable electrical, mechanical, and regulatory parameters.

Substiute Parts

TMP 10115

Traco PowerIn Stock: 1175TMP 10115 Datasheet

Current PartRFQ

TMPM 10115

Traco PowerIn Stock: 1174TMPM 10115 Datasheet

SimilarRFQ

TMPS 10-115

Traco PowerIn Stock: 923TMPS 10-115 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are determined strictly by comparison with the following key parameters: output voltage (15V), maximum output current (approximately 666mA), power rating (10W), input voltage range (85 ~ 264 VAC, 120 ~ 370 VDC), mounting type (through hole), number of outputs (1), compliance status (ROHS3), regulatory approvals (CB, CE, cULus, cURus), and package/case type. Only substitute products with matching or compatible values for these specific parameters are included.

Parameter Comparison

Engineering Selection Recommendations

Substitute selection is based solely on equivalence of regulated parameters: output voltage, maximum output current, power rating, input voltage range, mounting type, regulatory approval, and compliance status. TMPM 10115 and TMPS 10-115 from Traco Power qualify as substitutes for TMP 10115 due to matching electrical specifications, identical compliance with ROHS3 and REACH, applicable certifications (CB, CE, cULus/cURus), and through hole mounting. Variations in efficiency and package dimensions are specified for each substitute part; selection must only reference the parameters explicitly listed.

Frequently Asked Questions (FAQ)

What determines a valid substitute for the Traco Power TMP 10115 AC/DC Converter?

A valid substitute requires identical output voltage, maximum output current, power rating, input voltage range (AC/DC), mounting type, regulatory compliance, and safety approvals.

Can the substitute AC/DC converters TMPM 10115 and TMPS 10-115 be directly replaced in circuits using TMP 10115?

Based on the matching output voltage, current rating, input range, and through hole mounting, the listed substitute parts match the permitted substitution criteria.

Are the safety certifications and RoHS/REACH compliance equivalent for all substitute parts?

Yes, TMPM 10115 and TMPS 10-115 both maintain CB and CE certifications, as well as ROHS3 compliance and REACH unaffected status.

Does package or module size affect substitution?

Both substitute parts use through hole mounting and enclosed module packaging, with package type specified. Dimensional differences are provided; substitution decisions should use only the listed and compared mechanical parameters.

Are there differences in efficiency among the substitutes?

Efficiency is listed for each model: TMP 10115 (76%), TMPM 10115 (75%), TMPS 10-115 (84%). Engineer selection must be based solely on matching regulated and required parameters from the table.

Is operating temperature a factor in substitution for TMP 10115?

Each substitute lists operating temperature ratings; all meet or exceed the minimum requirement of -25°C ~ 50°C from the main part, with note of derating above 50°C for substitutes.

Do the substitutes provide the same number of outputs and functional category?

Yes, each part provides a single output at 15V and is specified for enclosed AC/DC conversion in ITE (Commercial) applications.