TMMH-105-01-F-DV-M-TR Equivalent & Substitute Parts

Part Overview

The TMMH-105-01-F-DV-M-TR is a 2MM low profile rectangular connector header manufactured by Samtec Inc. This surface mount connector features 10 positions arranged in 2 rows with 0.079" (2.00mm) pitch and mating spacing. The part is actively produced and widely stocked, with 1098 units available in inventory. Finding equivalent or substitute parts may be necessary for supply chain continuity, design flexibility, or specific application requirements where alternative configurations are acceptable.

Substiute Parts

TMMH-105-01-F-DV-M-TR

Samtec Inc.In Stock: 1138TMMH-105-01-F-DV-M-TR Datasheet

Current PartRFQ

TMMH-105-01-F-DV-M-TR

Samtec Inc.In Stock: 1138TMMH-105-01-F-DV-M-TR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TMMH-105-01-F-DV-M-TR is determined by strict equivalence across the following critical parameters:

• Pitch - Mating: 0.079" (2.00mm)
• Number of Positions: 10
• Number of Rows: 2
• Row Spacing - Mating: 0.079" (2.00mm)
• Connector Type: Header, Cuttable
• Contact Type: Male Pin
• Mounting Type: Surface Mount
• Termination: Solder
• Contact Finish - Mating: Gold
• Insulation Material: Liquid Crystal Polymer (LCP)
• Operating Temperature Range: -55°C ~ 125°C
• Material Flammability Rating: UL94 V-0
• RoHS Status: ROHS3 Compliant

Parts meeting all these criteria are considered direct equivalents. Any deviation in these parameters results in a non-equivalent part requiring design review and validation.

Parameter Comparison

Engineering Selection Recommendations

The TMMH-105-01-F-DV-M-TR is an active product with full ROHS3 compliance and UL94 V-0 flammability certification. The substitute part listed maintains identical specifications across all critical electrical and mechanical parameters. Both parts are manufactured by Samtec Inc. and are available in Tape & Reel packaging suitable for automated assembly processes. Selection between equivalent parts should be based on inventory availability, lead time, and cost considerations, as all technical and compliance requirements are met identically.

Frequently Asked Questions (FAQ)

Q: What determines if a part can substitute for the TMMH-105-01-F-DV-M-TR?

A: A substitute part must match all critical parameters: 0.079" (2.00mm) pitch, 10 positions in 2 rows, male pin contact type, surface mount configuration, solder termination, gold mating finish, LCP insulation, -55°C to 125°C operating range, UL94 V-0 rating, and ROHS3 compliance.

Q: Are there any compatibility concerns when using substitute parts?

A: No compatibility concerns exist when all specified parameters match. The connector footprint, mating interface, electrical performance, and thermal characteristics remain identical.

Q: What is the significance of the cuttable header design?

A: The cuttable header design allows the connector strip to be segmented to the required number of positions for specific applications while maintaining the same pitch and electrical characteristics.

Q: Does packaging type affect part selection?

A: Packaging type (Tape & Reel) affects handling and assembly processes but does not impact electrical or mechanical compatibility. Both the main part and substitute are supplied in Tape & Reel format suitable for pick-and-place assembly.

Q: Is ROHS3 compliance maintained across all equivalent parts?

A: Yes. All parts meeting the substitution criteria maintain ROHS3 compliance and UL94 V-0 flammability certification.