TMM-136-01-T-S-RE Equivalent & Substitute Parts

Part Overview

The TMM-136-01-T-S-RE is a 36-position rectangular connector header manufactured by Samtec Inc., designed for through-hole, right-angle board-to-board or cable applications. This connector operates within the -55°C to 105°C temperature range and is rated for 3.2A per contact. The part maintains Active product status and is ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating. Substitute parts are identified when electrical and mechanical parameters remain within the specified tolerances for this connector category.

Substiute Parts

TMM-136-01-T-S-RE

Samtec Inc.In Stock: 1265TMM-136-01-T-S-RE Datasheet

Current PartRFQ

TMM-136-01-T-S-RA

Samtec Inc.In Stock: 982TMM-136-01-T-S-RA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TMM-136-01-T-S-RE is determined by strict equivalence across the following critical parameters:

• Number of Positions: 36
• Pitch - Mating: 0.079" (2.00mm)
• Connector Type: Header
• Contact Type: Male Pin
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Current Rating: 3.2A per Contact
• Operating Temperature: -55°C ~ 105°C
• Contact Material: Phosphor Bronze
• Contact Finish: Tin
• Insulation Material: Liquid Crystal Polymer (LCP)
• Series: TMM
• RoHS Status: ROHS3 Compliant

The substitute part TMM-136-01-T-S-RA meets all these criteria and is therefore electrically and mechanically interchangeable within the specified application parameters.

Parameter Comparison

Engineering Selection Recommendations

Both TMM-136-01-T-S-RE and TMM-136-01-T-S-RA maintain Active product status from Samtec Inc. and carry ROHS3 compliance certification. The parts are functionally equivalent across all specified electrical and mechanical parameters. Selection between these parts may be based on inventory availability, as the TMM-136-01-T-S-RE currently has 1168 pieces in stock while the TMM-136-01-T-S-RA has 889 pieces available. Both parts satisfy the same application requirements for 36-position, 2.00mm pitch through-hole header connectors with 3.2A per contact current capacity and -55°C to 105°C operating temperature range.

Frequently Asked Questions (FAQ)

Q: Are TMM-136-01-T-S-RE and TMM-136-01-T-S-RA electrically interchangeable?

A: Yes. Both parts share identical electrical specifications including 36 positions, 0.079" (2.00mm) mating pitch, 3.2A per contact current rating, phosphor bronze contacts with tin finish, and -55°C to 105°C operating temperature range.

Q: What are the mechanical differences between these parts?

A: There are no mechanical differences. Both parts feature identical mounting type (through hole, right angle), contact geometry (square shape, 0.126" mating length, 0.120" post length), insulation material (LCP), and physical dimensions.

Q: Can I use TMM-136-01-T-S-RA as a direct replacement for TMM-136-01-T-S-RE?

A: Yes. The parts are direct substitutes with no design modifications required. Both are solder-terminated, 36-position headers within the TMM series.

Q: Are both parts RoHS compliant?

A: Yes. Both TMM-136-01-T-S-RE and TMM-136-01-T-S-RA are ROHS3 compliant with EAR99 export classification.

Q: What is the moisture sensitivity level for these connectors?

A: The TMM-136-01-T-S-RE has MSL 1 (Unlimited) rating. The TMM-136-01-T-S-RA is listed as Not Applicable for MSL, indicating no moisture sensitivity restrictions apply.