TMM-130-01-G-D-RE Equivalent & Substitute Parts

Part Overview

The TMM-130-01-G-D-RE is a 2MM terminal strip connector header manufactured by Samtec Inc. This through-hole, right-angle rectangular connector features 60 positions across 2 rows with 0.079" (2.00mm) pitch spacing. The part is classified as Active product status with ROHS3 compliance and MSL Level 1 rating. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across connector geometry, contact specifications, and termination characteristics.

Substiute Parts

TMM-130-01-G-D-RE

Samtec Inc.In Stock: 718TMM-130-01-G-D-RE Datasheet

Current PartRFQ

TMM-130-01-G-D-RA

Samtec Inc.In Stock: 918TMM-130-01-G-D-RA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TMM-130-01-G-D-RE is determined by strict equivalence across the following parameters:

• Number of Positions: 60
• Number of Rows: 2
• Pitch - Mating: 0.079" (2.00mm)
• Row Spacing - Mating: 0.079" (2.00mm)
• Connector Type: Header
• Contact Type: Male Pin
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Current Rating: 3.2A per Contact
• Operating Temperature: -55°C ~ 125°C
• Contact Material: Phosphor Bronze
• Contact Finish - Mating: Gold
• Insulation Material: Liquid Crystal Polymer (LCP)
• RoHS Status: ROHS3 Compliant

The substitute part TMM-130-01-G-D-RA maintains all critical electrical and mechanical parameters required for direct substitution within the TMM series connector family.

Parameter Comparison

Engineering Selection Recommendations

Both TMM-130-01-G-D-RE and TMM-130-01-G-D-RA are Active product status connectors from Samtec Inc. with identical ROHS3 compliance and EAR99 export classification. Selection between these parts is based on application-specific requirements and inventory availability. The TMM-130-01-G-D-RE currently maintains 627 pieces in stock, while the TMM-130-01-G-D-RA maintains 905 pieces in stock. Both parts meet the same electrical performance, thermal operating range, and mechanical specifications for board-to-board or cable connector applications requiring 60-position, 2-row header configurations with 2.00mm pitch spacing.

Frequently Asked Questions (FAQ)

Q: What determines if TMM-130-01-G-D-RA can substitute for TMM-130-01-G-D-RE?

A: Substitution is valid when all electrical and mechanical parameters are equivalent, including position count, row configuration, pitch spacing, contact material, contact finish, current rating, operating temperature range, and termination method. Both parts meet these criteria.

Q: Are there differences in connector geometry between these parts?

A: No. Both parts share identical contact length specifications (mating and post), insulation height, contact shape, and overall mechanical dimensions. The connector geometry is equivalent.

Q: Do both parts have the same compliance certifications?

A: Yes. Both TMM-130-01-G-D-RE and TMM-130-01-G-D-RA are ROHS3 compliant with MSL Level 1 and EAR99 export classification.

Q: What is the current handling capacity per contact?

A: Both parts are rated for 3.2A per contact, supporting the same electrical load requirements.

Q: Are the contact materials and finishes identical?

A: Yes. Both parts use phosphor bronze contact material with gold plating on mating surfaces (20.0µin thickness) and gold plating on post surfaces (3.00µin thickness).

Q: What is the operating temperature range for these connectors?

A: Both parts operate across -55°C to 125°C, providing equivalent thermal performance for industrial and commercial applications.