TMM-119-01-G-S-RE Equivalent & Substitute Parts

Part Overview

The TMM-119-01-G-S-RE is a 2MM terminal strip connector header manufactured by Samtec Inc. This through-hole, right-angle rectangular connector features 19 positions with male pin contacts and is designed for board-to-board or cable applications. The part is currently active in production status with 987 units in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and design alternatives where mechanical or electrical specifications remain within acceptable parameters.

Substiute Parts

TMM-119-01-G-S-RE

Samtec Inc.In Stock: 1010TMM-119-01-G-S-RE Datasheet

Current PartRFQ

TMM-119-01-G-S-RA

Samtec Inc.In Stock: 753TMM-119-01-G-S-RA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TMM-119-01-G-S-RE is determined by strict equivalence across the following critical parameters:

• Connector Type: Header
• Contact Type: Male Pin
• Number of Positions: 19
• Pitch - Mating: 0.079" (2.00mm)
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Current Rating: 3.2A per Contact
• Operating Temperature: -55°C ~ 125°C
• Contact Material: Phosphor Bronze
• Contact Finish - Mating: Gold
• Insulation Material: Liquid Crystal Polymer (LCP)
• RoHS Status: ROHS3 Compliant

The TMM-119-01-G-S-RA qualifies as a substitute part within the TMM series, maintaining identical electrical and mechanical specifications across all critical parameters. Both parts share the same base product number (TMM-119) and are manufactured by Samtec Inc.

Parameter Comparison

Engineering Selection Recommendations

Both the TMM-119-01-G-S-RE and TMM-119-01-G-S-RA are active production parts manufactured by Samtec Inc. and maintain full ROHS3 compliance. Selection between these parts should be based on availability and procurement lead times. The TMM-119-01-G-S-RE currently has higher inventory availability at 987 units. Both parts are suitable for applications requiring 19-position, 2.00mm pitch rectangular connectors with through-hole, right-angle mounting and solder termination. No functional or electrical differences exist between these parts based on provided specifications.

Frequently Asked Questions (FAQ)

Q: Can TMM-119-01-G-S-RA be used as a direct replacement for TMM-119-01-G-S-RE?

A: Yes. Both parts share identical electrical and mechanical specifications across all critical parameters including connector type, contact configuration, pitch, mounting style, current rating, and operating temperature range.

Q: Are there differences in contact finish or material composition?

A: No. Both parts use phosphor bronze contacts with gold plating at 20.0µin (0.51µm) thickness on mating surfaces and 3.00µin (0.076µm) on post surfaces.

Q: What is the difference between the part numbers TMM-119-01-G-S-RE and TMM-119-01-G-S-RA?

A: The part numbers differ only in the final suffix characters (RE versus RA). Both parts are within the TMM series and share the same base product number TMM-119. The suffix variation does not affect electrical or mechanical compatibility.

Q: Are both parts RoHS compliant?

A: Yes. Both TMM-119-01-G-S-RE and TMM-119-01-G-S-RA are ROHS3 compliant.

Q: What is the current rating per contact?

A: Both parts are rated for 3.2A per contact, suitable for standard signal and low-power applications.

Q: What is the operating temperature range?

A: Both parts operate across -55°C to 125°C, supporting industrial and extended temperature applications.