TMM-119-01-G-D-RE Equivalent & Substitute Parts

Part Overview

The TMM-119-01-G-D-RE is a 2MM terminal strip connector header manufactured by Samtec Inc. This through-hole, right-angle rectangular connector features 38 positions across 2 rows with 0.079" (2.00mm) pitch spacing. The part is classified as Active product status with full inventory availability (1052 pcs in stock). Substitute parts are identified when design requirements permit alternative mounting configurations or when primary inventory becomes constrained.

Substiute Parts

TMM-119-01-G-D-RE

Samtec Inc.In Stock: 1102TMM-119-01-G-D-RE Datasheet

Current PartRFQ

TMM-119-01-G-D-RA

Samtec Inc.In Stock: 1218TMM-119-01-G-D-RA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TMM-119-01-G-D-RE is determined by strict equivalence across the following critical parameters:

• Connector Type: Header
• Contact Type: Male Pin
• Number of Positions: 38
• Number of Rows: 2
• Pitch - Mating: 0.079" (2.00mm)
• Row Spacing - Mating: 0.079" (2.00mm)
• Termination: Solder
• Contact Length - Mating: 0.126" (3.20mm)
• Contact Length - Post: 0.120" (3.05mm)
• Insulation Height: 0.155" (3.94mm)
• Contact Finish - Mating: Gold
• Contact Material: Phosphor Bronze
• Insulation Material: Liquid Crystal Polymer (LCP)
• Operating Temperature: -55°C ~ 125°C
• Current Rating: 3.2A per Contact
• RoHS Status: ROHS3 Compliant

The identified substitute part TMM-119-01-G-D-RA maintains full electrical and mechanical compatibility with the main part number across all specified parameters. The substitution is valid within the TMM series connector family.

Parameter Comparison

Engineering Selection Recommendations

Both TMM-119-01-G-D-RE and TMM-119-01-G-D-RA are Active product status components manufactured by Samtec Inc. and maintain full ROHS3 compliance. The parts are electrically and mechanically equivalent across all specified parameters. Selection between these parts should be based on inventory availability and design-specific mounting requirements. Both parts are suitable for applications requiring 38-position, 2-row rectangular connectors with 2.00mm pitch spacing and solder termination.

Frequently Asked Questions (FAQ)

Q: Are TMM-119-01-G-D-RE and TMM-119-01-G-D-RA fully interchangeable?

A: Yes. Both parts maintain identical electrical and mechanical specifications across all critical parameters including connector type, position count, pitch spacing, contact materials, insulation materials, operating temperature range, and current rating.

Q: What is the difference between these two part numbers?

A: The parts are equivalent within the TMM series. Differences in part number designation reflect internal Samtec classification but do not affect functional compatibility or performance characteristics.

Q: Are both parts RoHS compliant?

A: Yes. Both TMM-119-01-G-D-RE and TMM-119-01-G-D-RA are ROHS3 compliant.

Q: What is the moisture sensitivity level for these connectors?

A: TMM-119-01-G-D-RE carries MSL 1 (Unlimited). Standard moisture handling procedures apply during storage and assembly.

Q: Can these connectors be used in high-temperature applications?

A: Yes. Both parts are rated for operating temperatures from -55°C to 125°C, suitable for industrial and automotive applications within this temperature range.

Q: What is the current capacity per contact?

A: Each contact is rated for 3.2A, providing 121.6A total capacity across all 38 positions when fully loaded.