TMM-116-01-L-S-RE Equivalent & Substitute Parts

Part Overview

The TMM-116-01-L-S-RE is a 2MM terminal strip connector header manufactured by Samtec Inc. This through-hole, right-angle rectangular connector features 16 positions with 0.079" (2.00mm) pitch and is designed for board-to-board or cable applications. The part is currently active in production with 736 units in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and design continuity when the primary part becomes unavailable or when alternative configurations meet application requirements.

Substiute Parts

TMM-116-01-L-S-RE

Samtec Inc.In Stock: 794TMM-116-01-L-S-RE Datasheet

Current PartRFQ

TMM-116-01-L-S-RA

Samtec Inc.In Stock: 1186TMM-116-01-L-S-RA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TMM-116-01-L-S-RE is determined by strict equivalence across the following critical parameters:

• Manufacturer and Series: Samtec Inc., TMM series
• Connector Type and Contact Type: Header with Male Pin contacts
• Number of Positions and Pitch: 16 positions at 0.079" (2.00mm) mating pitch
• Mounting Configuration: Through Hole, Right Angle orientation
• Termination Method: Solder termination
• Electrical Performance: 3.2A per contact current rating, -55°C ~ 125°C operating temperature range
• Material Specifications: Phosphor Bronze contacts with Gold mating finish, Liquid Crystal Polymer insulation
• Compliance: ROHS3 Compliant

The identified substitute part TMM-116-01-L-S-RA maintains full equivalence across all critical electrical and mechanical parameters, differing only in fastening type designation within the part number suffix. Both parts are manufactured by Samtec Inc. within the TMM series and share identical connector architecture, contact configuration, and performance specifications.

Parameter Comparison

Engineering Selection Recommendations

Both TMM-116-01-L-S-RE and TMM-116-01-L-S-RA are active production parts manufactured by Samtec Inc. and maintain full ROHS3 compliance. Selection between these parts should be based on inventory availability and procurement lead times. The TMM-116-01-L-S-RA currently has higher inventory availability at 1104 units compared to 736 units for the TMM-116-01-L-S-RE, making it a viable alternative for applications requiring immediate procurement. Both parts are equivalent for all electrical and mechanical applications within the specified operating parameters.

Frequently Asked Questions (FAQ)

Q: Are TMM-116-01-L-S-RE and TMM-116-01-L-S-RA fully interchangeable?

A: Yes. Both parts are electrically and mechanically equivalent. They share identical connector architecture, contact configuration, pitch, current rating, and operating temperature range. Both are ROHS3 compliant and manufactured by Samtec Inc. within the TMM series.

Q: What is the difference between these two part numbers?

A: The difference is indicated in the part number suffix. Both parts maintain identical specifications for all critical electrical and mechanical parameters including 16 positions, 0.079" (2.00mm) pitch, 3.2A per contact current rating, and -55°C ~ 125°C operating temperature.

Q: Can I use TMM-116-01-L-S-RA as a direct replacement for TMM-116-01-L-S-RE in existing designs?

A: Yes. The parts are fully equivalent and can be used interchangeably in board-to-board or cable applications without design modification.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts are ROHS3 compliant and carry identical compliance certifications. Both are classified under ECCN EAR99 and HTSUS 8536.69.4040.

Q: Which part should I select for new procurement?

A: Selection should be based on inventory availability and procurement requirements. TMM-116-01-L-S-RA currently has higher stock availability at 1104 units. Both parts are active production items with equivalent lead times and specifications.