TMM-115-01-T-S-RE Equivalent & Substitute Parts

Part Overview

The TMM-115-01-T-S-RE is a 2MM terminal strip connector header manufactured by Samtec Inc. This through-hole, right-angle rectangular connector features 15 positions with male pin contacts and is designed for board-to-board or cable applications. The part is currently active in production with 873 units in stock. Substitute parts may be required due to inventory constraints, regional availability, or specific application requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

TMM-115-01-T-S-RE

Samtec Inc.In Stock: 953TMM-115-01-T-S-RE Datasheet

Current PartRFQ

TMM-115-01-T-S-RA

Samtec Inc.In Stock: 860TMM-115-01-T-S-RA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TMM-115-01-T-S-RE is determined by strict equivalence across the following critical parameters:

• Pitch - Mating: 0.079" (2.00mm)
• Number of Positions: 15
• Connector Type: Header
• Contact Type: Male Pin
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Current Rating: 3.2A per Contact
• Operating Temperature: -55°C ~ 105°C
• Contact Material: Phosphor Bronze
• Insulation Material: Liquid Crystal Polymer (LCP)
• Series: TMM
• RoHS Status: ROHS3 Compliant

The substitute part TMM-115-01-T-S-RA meets all critical electrical and mechanical parameters required for direct substitution in applications designed for the TMM-115-01-T-S-RE.

Parameter Comparison

Engineering Selection Recommendations

Both TMM-115-01-T-S-RE and TMM-115-01-T-S-RA are active production parts manufactured by Samtec Inc. and carry ROHS3 compliance certification. Selection between these parts should be based on inventory availability and lead time requirements, as all electrical and mechanical specifications are identical. Both parts are suitable for applications requiring 15-position, 2.00mm pitch header connectors with through-hole, right-angle mounting and 3.2A per contact current capacity across the -55°C to 105°C operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can TMM-115-01-T-S-RA be used as a direct replacement for TMM-115-01-T-S-RE?

A: Yes. Both parts share identical electrical and mechanical specifications, including pitch, position count, current rating, operating temperature range, contact material, and insulation material. They are functionally equivalent for board-to-board and cable applications.

Q: What are the critical parameters that define substitution eligibility?

A: Substitution is valid when the following parameters match: 2.00mm mating pitch, 15 positions, male pin contact type, through-hole right-angle mounting, solder termination, 3.2A per contact current rating, -55°C to 105°C operating temperature, phosphor bronze contacts, and LCP insulation material.

Q: Are there any compliance differences between these parts?

A: No. Both parts are ROHS3 compliant and carry identical regulatory certifications (ECCN: EAR99, HTSUS: 8536.69.4040).

Q: What is the difference between TMM-115-01-T-S-RE and TMM-115-01-T-S-RA?

A: The parts are identical in all specified electrical and mechanical parameters. Differences, if any, are not documented in the provided technical specifications and do not affect functional compatibility.

Q: Which part should be selected based on availability?

A: Selection should prioritize current inventory levels and procurement lead times. TMM-115-01-T-S-RE has 873 units in stock, while TMM-115-01-T-S-RA has 823 units in stock. Both are suitable for immediate deployment.