TMM-113-01-S-D-SM-M Equivalent & Substitute Parts

Part Overview

The TMM-113-01-S-D-SM-M is a 2MM terminal strip connector header manufactured by Samtec Inc. for surface mount applications. This rectangular connector features 26 positions arranged in 2 rows with 0.079" (2.00mm) pitch spacing, designed for board-to-board or cable interconnection. The part is currently active in production with 625 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when inventory requirements necessitate alternative stock sources.

Substiute Parts

TMM-113-01-S-D-SM-M

Samtec Inc.In Stock: 709TMM-113-01-S-D-SM-M Datasheet

Current PartRFQ

TMM-113-01-S-D-SM-P

Samtec Inc.In Stock: 1097TMM-113-01-S-D-SM-P Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The TMM-113-01-S-D-SM-P is identified as a substitute for the TMM-113-01-S-D-SM-M based on equivalence in the following critical parameters:

• Connector type, contact type, and gender (Header, Male Pin)
• Position count and row configuration (26 positions, 2 rows)
• Pitch spacing (0.079" / 2.00mm mating pitch and row spacing)
• Mounting technology (Surface Mount)
• Termination method (Solder)
• Contact material and insulation material (Phosphor Bronze, LCP)
• Operating temperature range (-55°C ~ 125°C)
• Current rating per contact (3.2A)
• Compliance certifications (ROHS3 Compliant, UL94 V-0)

Both parts belong to the TMM series and share identical mechanical and electrical specifications. The substitution is valid for applications requiring equivalent board-to-board or cable interconnection with identical contact density and pitch requirements.

Parameter Comparison

Engineering Selection Recommendations

Both TMM-113-01-S-D-SM-M and TMM-113-01-S-D-SM-P are active production parts from Samtec Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on inventory availability and supply chain requirements. Both parts maintain ROHS3 compliance and UL94 V-0 flammability certification, meeting regulatory requirements for industrial and commercial applications. The TMM-113-01-S-D-SM-P currently has higher inventory availability (1067 units versus 625 units), which may influence procurement decisions for high-volume applications.

Frequently Asked Questions (FAQ)

Q: Are TMM-113-01-S-D-SM-M and TMM-113-01-S-D-SM-P mechanically interchangeable?

A: Yes. Both parts share identical mechanical specifications including pitch (0.079" / 2.00mm), position count (26), row configuration (2 rows), and mounting type (Surface Mount). They are mechanically interchangeable in applications requiring board-to-board or cable interconnection.

Q: Are these parts electrically equivalent?

A: Yes. Both parts have identical electrical specifications including contact material (Phosphor Bronze), current rating (3.2A per contact), operating temperature range (-55°C ~ 125°C), and contact finish (Gold mating surface, Tin post finish).

Q: Do both parts meet the same compliance standards?

A: Yes. Both TMM-113-01-S-D-SM-M and TMM-113-01-S-D-SM-P are ROHS3 compliant and carry UL94 V-0 flammability certification.

Q: What is the difference between these two part numbers?

A: The provided specifications indicate these parts are equivalent. Differences, if any, are not reflected in the documented electrical or mechanical parameters.

Q: Can I use TMM-113-01-S-D-SM-P as a direct replacement for TMM-113-01-S-D-SM-M?

A: Yes, based on identical specifications for connector type, contact configuration, pitch, mounting method, and electrical ratings, TMM-113-01-S-D-SM-P is a direct substitute for TMM-113-01-S-D-SM-M.