TMM-106-01-L-D-SM-P Equivalent & Substitute Parts

Part Overview

The TMM-106-01-L-D-SM-P is a 2MM terminal strip connector header manufactured by Samtec Inc. This surface mount rectangular connector features 12 positions arranged in 2 rows with 0.079" (2.00mm) pitch spacing. The component is classified as Active product status and is designed for board-to-board or cable interconnection applications. Substitute parts are identified when equivalent electrical and mechanical parameters are required due to inventory constraints, lead time considerations, or design flexibility needs.

Substiute Parts

TMM-106-01-L-D-SM-P

Samtec Inc.In Stock: 698TMM-106-01-L-D-SM-P Datasheet

Current PartRFQ

NRPN062MAMS-RC

Sullins Connector SolutionsIn Stock: 3816NRPN062MAMS-RC Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The NRPN062MAMS-RC manufactured by Sullins Connector Solutions qualifies as a substitute for the TMM-106-01-L-D-SM-P based on the following critical parameters:

Matching Parameters:

• Connector Type: Header
• Contact Type: Male Pin
• Number of Positions: 12
• Number of Rows: 2
• Pitch - Mating: 0.079" (2.00mm)
• Row Spacing - Mating: 0.079" (2.00mm)
• Mounting Type: Surface Mount
• Termination: Solder
• Fastening Type: Push-Pull
• Shrouding: Unshrouded
• Contact Shape: Square
• Material Flammability Rating: UL94 V-0
• RoHS Status: ROHS3 Compliant
• Style: Board to Board or Cable

These parameters define the core mechanical and electrical compatibility for rectangular connector substitution in this product category.

Parameter Comparison

Engineering Selection Recommendations

Both the TMM-106-01-L-D-SM-P and NRPN062MAMS-RC maintain Active product status and ROHS3 compliance, confirming ongoing manufacturer support and regulatory alignment. The primary differences in electrical performance are the operating temperature range and current rating. The TMM-106-01-L-D-SM-P supports -55°C to 125°C operation with 3.2A per contact, while the NRPN062MAMS-RC operates from -40°C to 105°C with 2A per contact. Contact length also differs: 0.126" (3.20mm) versus 0.141" (3.60mm). Selection between these parts should be based on specific application requirements for temperature range, current capacity, and mating depth constraints. Both components carry UL94 V-0 flammability certification.

Frequently Asked Questions (FAQ)

Q: What are the critical parameters that define substitution compatibility for the TMM-106-01-L-D-SM-P?

A: The core substitution parameters are: 12-position, 2-row configuration; 0.079" (2.00mm) pitch and row spacing; surface mount solder termination; unshrouded header with male pins; square contact shape; and push-pull fastening. These parameters ensure mechanical and electrical interchangeability at the board interface level.

Q: How do the operating temperature ranges differ between these parts?

A: The TMM-106-01-L-D-SM-P operates across -55°C to 125°C, providing a wider temperature envelope. The NRPN062MAMS-RC operates from -40°C to 105°C. Applications requiring extended low-temperature operation below -40°C or sustained operation above 105°C require the Samtec part.

Q: What is the significance of the contact length difference?

A: The TMM-106-01-L-D-SM-P has a mating contact length of 0.126" (3.20mm), while the NRPN062MAMS-RC measures 0.141" (3.60mm). This 0.015" difference affects mating depth and may impact PCB layout and connector cavity design. Verify mechanical clearance in your specific application.

Q: How do the current ratings compare?

A: The TMM-106-01-L-D-SM-P is rated for 3.2A per contact, while the NRPN062MAMS-RC is rated for 2A per contact. Applications requiring current delivery above 2A per contact require the Samtec part.

Q: Are both parts RoHS compliant?

A: Yes, both the TMM-106-01-L-D-SM-P and NRPN062MAMS-RC are ROHS3 compliant and carry UL94 V-0 flammability certification, meeting current regulatory and safety standards.